La Crosse WS-8115U-IT User manual

WS-8115U-IT www.lacrossetechnology.com/support Page | 1
Model: WS-8115U-IT
Instruction Manual
DC: 051616
Digital Atomic Wall Clock
Time, Alarm +
WWVB Icon
Foldout Stands
Indoor Temp,
Weekday, Date,
+ Outdoor Temp
TX38U-IT-N
Buttons

WS-8115U-IT www.lacrossetechnology.com/support Page | 2
Get Started
1. Insert 2 fresh AAA, Alkaline batteries into the TX38U-IT-N sensor.
Observe the correct polarity.
2. Insert 2 fresh AA, Alkaline batteries into the atomic clock. Observe
the correct polarity.
3. After 5 minutes, place the sensor outside in a shaded
location. Maximum range is 200 feet (60 meters) open air.
Set Time, Date, 12/24 Hour, Temperature Units
1. Press the SET button to enter time set mode, confirm adjustments
and move to next item.
2. Press the PLUS button to adjust values.
Settings order:
1. Time Zone
2. Daylight Saving Indicator
3. Language
4. Hour
5. Minutes
6. Year (2 digit)
7. Month
8. Date
9. Weekday
10. 12/24 Hour Format
11. Fahrenheit/Celsius
Press SET to exit, or wait 30 seconds without pressing buttons to return
to the normal time display.
Set Alarm Time
1. Hold ALARM to enter alarm set mode.
2. Press PLUS to adjust values.
3. Press ALARM to confirm adjustments and move to next item.
Setting order: 1. Hour 2. Minutes
Press ALARM to exit, or wait 30 seconds without pressing buttons to
return to the normal time display.
Deactivate/Activate Alarm
•Press ALARM once, firmly, to deactivate the alarm.
•The alarm icon will disappear.
This clock has time zones
from GMT 0 to +/-12h North
American time zones:
-4h ATL - Atlantic
-5h EST - Eastern (default)
-6h CST - Central
-7h MST - Mountain
-8h PST - Pacific
-9h ALA – Alaska
-10h -Hawaiian
Languages:
US English
F French
ESpanish
d German

WS-8115U-IT www.lacrossetechnology.com/support Page | 3
Low
Battery
Icons
•Press ALARM once, firmly, to activate the alarm.
•The alarm icon will appear.
Snooze
•Press SNOOZE to silence an active alarm for 10 minutes.
•The alarm icon will flash.
This is a crescendo alarm that will sound for 85 seconds if not
deactivated. Press any button to stop the alarm for 24 hours.
Reset Button
•If the atomic clock display appears distorted or is not
responding to buttons, use a pen or paperclip to press
RESET one time.
•This will reset the atomic to default settings.
WWVB Radio-controlled Time
•WWVB Icon will flash when searching.
For information about WWVB visit:
www.nist.gov/pml/div688/grp40/wwvb.cfm
ATOMIC SIGNAL SEARCH:
The atomic clock will search for 1 hour between midnight and 6am until
the WWVB time signal is received. After reception, the atomic clock will
only search for the atomic signal after midnight.
Low Battery Icon
Low battery icon indicates low battery for station or sensor.
•When the TX icon is displayed replace batteries in the outdoor
sensor.
•When the RX icon is displayed replace batteries in the atomic clock.

WS-8115U-IT www.lacrossetechnology.com/support Page | 4
Position Outdoor Sensor
•Mount the outdoor sensor on a north-facing wall or in any well
shaded area. Under an eave or deck rail is preferred.
•The maximum transmitting range to the atomic clock is over 200 feet
(60 meters) in open air, not including walls.
Specifications
Indoor:
Temperature Range:
14.2°F to 99.9°F
-9.9ºC to 37.7ºC
Outdoor:
Temperature Range: -39.8°F to 139.8°F
-39.9ºC to 59.9ºC
Distance:
Over 200 ft. (60 meters)
RF 915MHz (open air)
Interval:
About every 8 seconds
Power:
Atomic clock 2-AA, IEC, LR6 batteries
(not included)
TX38U-IT-N Sensor:
2-AAA, IEC, LR3 batteries
(not included)
Battery Life:
Atomic clock
Over 24 months
TX38U-IT-N Sensor:
Over 12 months
Dimensions:
Atomic clock: 8.9”L x 1.2”W x 7.1”H
(226.06 L x 30.48W x 180.34 H mm)
TX38U-IT-N Sensor:
1.28"L x 0.56"W x 3.41"H
(32.5 L x 14.2 W x 86.61 mm)

WS-8115U-IT www.lacrossetechnology.com/support Page | 5
Care and Maintenance
•Do not mix old and new batteries
•Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries
•Always purchase the correct size and grade of battery most suitable
for intended use.
•Replace all batteries of a set at the same time.
•Clean the battery contacts and also those of the device prior to
battery installation.
•Ensure the batteries are installed with correct polarity (+and -).
•Remove batteries from equipment which is not to be used for an
extended period of time.
•Remove expired batteries promptly.
•The specifications of this product may change without prior notice.
•Improper use or unauthorized opening of housing voids warranty.
Warranty and Support Information
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from
date of purchase) on this product relating to manufacturing defects in
materials & workmanship.
Before returning a product, please contact our friendly customer
support with questions or visit our online help:
Phone: [phone]
Online Product Support: www.lacrossetechnology.com/support
Product Registration:
www.lacrossetechnology.com/support/register
View full warranty details online at:
www.lacrossetechnology.com/warranty_info.pdf
Warranty Address:
La Crosse Technology, Ltd
2830 S. 26th St.
La Crosse, WI 54601
Protected under U.S. Patents:
5,978,738 | 6,076,044 |RE43903

WS-8115U-IT www.lacrossetechnology.com/support Page | 6
FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for
help.
This device must not be co-located or operating in conjunction with any
other antenna or transmitter.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such
modifications could void the user authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form,
even in part, or duplicated or processed using electronic, mechanical or
chemical process without the written permission of the publisher.
This booklet may contain errors or misprints. The information it contains
is regularly checked and corrections are included in subsequent editions.
We disclaim any responsibility for any technical error or printing error, or
their consequences.
All trademarks and patents are recognized.