La Crosse 513-1211.513-1211A User manual

Model: 513-1211/513-1211A www.lacrossetechnology.com/support Page | 1
Model: 513-1211.513-1211A
Instruction Manual
DC: 081815
ATOMIC DIGITAL CLOCK
FRONT
VIEW
FOLDOUT
LEG
STAND
Battery
Compartment
3 “AA”
Time + Alarm
Calendar + Indoor Temperature
BACK
VIEW
TIME ZONE
SELECTOR
BUTTONS
Time Zone Indicator

Model: 513-1211/513-1211A www.lacrossetechnology.com/support Page | 2
TIME ZONES
PST Pacific
MST Mountain
CST Central
EST Eastern
GET STARTED
Step 1: Use the time zone selector (on back) to choose your time zone.
Step 2: Insert 3 new AA batteries (not included) into the clock. Observe the
correct polarity.
Restart: If there is no indoor temperature data after 60 seconds, remove
batteries from the clock and press a button 20 times. After 5 minutes,
return to Step 1 above.
SET TIME, DATE AND TEMPERATURE
1. Hold the SET button to enter time set mode.
2. Press the WAVE/+ or DST/- buttons to adjust values.
3. Press the SET button to confirm and move to the next item.
TIME SET ORDER:
1. 12/24 hour time format
2. Hour
3. Minutes
4. Year
5. Month
6. Date
Press the SET button to exit, or wait 20 seconds without pressing buttons to
return to the normal time display.
DAYLIGHT SAVING TIME SETTING
Hold the DST button for 3 seconds to select DST on or off.
The DST icon DST appears in above the seconds when DST is on.
TIME ZONE SELECTION
Slide the time zone selector bar on the back of the clock to
choose the time zone for your area.
FAHRENHEIT/CELSIUS
Hold the °C/°F button for 3 seconds to select Fahrenheit or Celsius temperature
readings.
SET TIME ALARM
Press the SET button once to enter Alarm Mode. The letters AL will show in the
seconds display.
1. Hold the SET button for 3 seconds to enter alarm time set mode.
2. Press the WAVE/+ or DST/- buttons to adjust values.
3. Press the SET button to confirm and move to the next item.
Alarm Time setting order: 1. Hours, 2. Minutes

Model: 513-1211/513-1211A www.lacrossetechnology.com/support Page | 3
Alarm
Bell Icon
Snooze
Icon
ACTIVATE/DEACTIVATE TIME ALARM
Press the SET button once to view alarm time.
 Press the WAVE/+ or DST/- buttons to activate the alarm.
Once activated, the bell icon appears.
Press the WAVE/+ or DST/- buttons to deactivate the alarm.
The bell icon will disappear.
SNOOZE (SILENCES ALARM TEMPORARILY)
When alarm sounds, press the SNOOZE button to silence the alarm
for 5 minutes. The alarm icon will flash.
In snooze mode, press any button to stop alarm for one day.
Note: The alarm will sound for 2 minutes and then shut off completely.
MANUAL WWVB RADIO-CONTROLLED (ATOMIC) TIME SEARCH
Press the WAVE/+ button to start or stop a manual signal search. WWVB
Icon will flash when searching.
For information about WWVB visit:
www.nist.gov/pml/div688/grp40/wwvb.cfm
ATOMIC SIGNAL SEARCH: The clock will search every 2 hours until the WWVB
time signal is received. After reception, this clock will only search for the atomic
signal after midnight.
ATOMIC CLOCK CARE AND MAINTENANCE
Do not mix old and new batteries
Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries
Always purchase the correct size and grade of battery most suitable for
intended use.
Replace all batteries of a set at the same time.
Clean the battery contacts and also those of the device prior to battery
installation.
Ensure the batteries are installed with correct polarity (+and -).
Remove batteries from equipment which is not to be used for an extended
period.
Remove expired batteries promptly.
SPECIFICATIONS
Temperature Range: +14 to +122 °F (-10 to +50 °C)
Power: 3-AA, IEC, LR6 batteries (not included)
Dimensions: 10.75" x 1.38" x 16.75" (273.05 x 30.052 x 425.45 mm)
LOW BATTERY ICONS
When the icon is displayed, replace batteries in the clock.
WWVB
Atomic Icon
Low Battery
Icon

Model: 513-1211/513-1211A www.lacrossetechnology.com/support Page | 4
WARRANTY AND SUPPORT INFORMATION
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase)
on this product relating to manufacturing defects in materials & workmanship.
View full warranty details online at:
www.lacrossetechnology.com/warranty_info.pdf
For warranty work, technical support or other information contact:
La Crosse Technology, Ltd
2830 South 26th St
La Crosse, WI 54601
Contact Support: Online Product Support:
1-888-211-1923 www.lacrossetechnology.com/support
Product Registration: Protected under U.S. Patents:
www.lacrossetechnology.com/support/register 5,978,738 | 6,076,044 | RE43903
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any other antenna or
transmitter. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user
authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or
duplicated or processed using electronic, mechanical or chemical process without the
written permission of the publisher. This booklet may contain errors or misprints. The
information it contains is regularly checked and corrections are included in subsequent
editions. We disclaim any responsibility for any technical error or printing error, or their
consequences.
All trademarks and patents are recognized.