Lab-T GF520 User manual
Copyright ⓒ2019. Lab-T, Inc.
User Manual
Product SpecPrecaution during device chargingHow to use the product
❶ Connect the product to the power device.
❷ Place the device on top of the product.
❸ Once you place the device, the Installation of
‘Samsung Galaxy Friends Service’ will begin.
❹ The content will remain after you release the
device from the product.
・ For high-speed charging, please use the
original Samsung charger (9V/1.67A).
・ The charger is not included.
・ The charger must be near the socket
during charging, place it where you can
easily touch.
・ For content update, you will need
mobile network or WiFi connection.
Make sure the device is set in the middle of the product as
shown in Figure 1/2/3. If the device is set incompletely as
shown in Figure 4, the charging efficiency may drop.
When using the product, the back side of the device must
meet the charging area, and if you drop the device onto
the product, the product may be damaged. In this case, it
will be the customer’s accidental damage. Please be
careful in using the product.
・ Before use, read this user’s guide for safety and correct
usage of the product.
・ The picture from the guide can be different from the
actual product, the content may change without notice
to the customer for performance improvement.
・ If you wish to connect and use with a different mobile
device, please check if the product is compatible with
the related mobile device.
・ Some mobile phone accessary cases may be difficult to
charge depending on the case design.
・ Please contact the customer service of CONSPIN
SOLUTION Co., LTD. if the product’s wireless charge and
operation is not working properly.
User Guide
Product Structure
Smart Wireless Charging Pad User’s Guide
Galaxy Friends
LED Indicator
Light
Wireless
Charging Pad
LED Indicator Light
Green: Full Charge
Red: Charging
Red Blink: FOD
- Figure 1 -
- Figure 4 -
- Figure 2 -
- Figure 3 -
August 2019
Product appearance
(Width*Length*Height):
102 * 102 * 16 (mm)
CONSPIN SOLUTION Co., Ltd.
China
5V/1A, 9V/1A
BLE 4.2
White
PC/Silicone
Smart Wireless Charging Pad,
User’s Guide
100g
CONSPIN SOLUTION Co., Ltd.
+82 2 888 7060
6 months
Smart Wireless Charging PadName
Release date
of the same model
Specification
Manufacturer/Importer
Country of
Manufacture
Output
RF
5V/2A, 9V/1.67AInput
Color
Material
Composition
Weight
Telephone
No. of AS manager
Warranty Period
GF520Model Name
Free Service Paid Service
OFFICE
TEL
FAX
A/S Inquiry
2F, 120, Gwanak-ro, Gwanak-gu, Seoul
+82 2 888 7060
+82 2 888 7061
+82 2 888 7060
conspins.com
Cautions for Safety
※ Please read it carefully before use and make
sure to keep it.
• This product is for 14 years old or older.
• Do not store in a place with high humidity or high
temperature.
• Be careful that children or pets do not suck or bite
the product.
• The product may be damaged if excessive forces
are applied during mounting and removing the
device.
• This product can be exchanged or compensated
according to the Consumer Dispute Resolution
notified by Fair Trade Commission
• In case the malfunction is caused by user’s
carelessness / handling mistake and the device is
disassembled / modified / damaged at user’s
discretion, free warranty is not provided
• Do not touch the product with wet hands.
• Do not apply strong impact to the product such as
dropping.
• The proper operating temperature of this product
is 0 °C ~ 35 °C and the product may be damaged at
temperatures above or below the proper
temperature.
• Do not modify / disassemble / repair the product at
user’s discretion.
Notes on Connection
• The product can be used when it is connected to
charger or PC.
• Be careful not to allow foreign matters (liquid,
dust, etc.) enter into the inside of mobile device
connection jack. The product may not work.
• Do not move the mobile devices while the product
and device are connected. Connection jack of
mobile device may be damaged.
Inquiry for Product A/S
• Please inform us of product model, faulted
conditions and contact information when inquiring
A/S.
• Please call the Customer Service Center
(+82 2 888 7060) of CONSPIN SOLUTION Co., Ltd.
if the product fails.
• Warranty period of charging stand is six months
after purchase. In case of trouble due to defective
product, the product can be exchanged after
returning and inspecting the product.
* Refunds: Refund with purchased price at the place
of purchase (Submit receipt at the time of purchase)
Types of
Consumer’s
Damage
Compensation
Within
Warranty Period
After
Warranty
Period
Product
damages
occurred
during
Within
7 days
after
purchase
Exchange or
refund the product
at the place of
purchase
Exchange the product or
refund at the place of pur-
chase after checking whether
the product is collected /
defective by the customer
service center of CONSPIN
SOLUTION Co., Ltd.
Exchange the product after
checking whether the
product is defective by the
customer service center of
CONSPIN SOLUTION Co., Ltd.
In case
performance
or
functional
failure under
normal use
condition is
occurred
within
A/S period
(6 months)
Within
7 days
after
purchase
After
7 days
after
purchase
N/A
Free service may be provided in the event of a
malfunction occurring under normal use within the
warranty period and non-malfunctioning and
consumer’s mistake will be excluded.
1. In case the malfunction is caused by customer’s fault
・ Malfunction caused by carelessness (soaking, breakage,
damage) in use
・ Malfunction caused by NOT keeping the “cautions” in
the user’s guide
2. Other cases
・ Malfunction caused by natural disasters
(fire, damage from sea wind, flood damage, lightning, etc.)
※ The services may be rejected in the following cases.
・ In case product is modified, altered, reproduced or
used private or imitation parts with user’s own discretion
・ In case the product is replaced with a part other than
the part at the time of purchase (or after A/S)
Please check the user’s guide in advance since the
charges may be incurred regardless of the warranty
period in case the product is not defective or the
malfunction is caused by a consumer’s mistake.
Malfunction
caused by
intentional
negligence
of the
consumer
Partial repair impossible
Paid purchase can be
made at the price of
the product by the
customer’s request
(from the time of purchase
to A/S stock retention period
(within 6 months))
Types of
Consumer’s
Damage
Compensation
Within
Warranty Period
After
Warranty Period
N/A
❶
❷
Silicone Cover
Wireless Charging Pad
Before Use
・ Be sure to read this quick guide before usage to
ensure safe and quick usage of the product.
・ Illustrations in the User's Manual may differ from
reality, and the contents may be changed in some
ways without notice to improve performance.
・ Attach the silicone cover to smart wireless charging pad.
・ Excessive force during removal or attachment of
the silicone cover may cause damage to the
product and the cover.
QUICK GUIDE
SMART WIRELESS CHARGING PAD
Align
Compliance Statement
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions : (1) This device may not cause
harmful interference, and (2) This device must
accept any interference received, including
interference that may cause undesired
operation.
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures :
— Reorient or relocate the receiving antenna.
— Increase the separation between the
equipment and receiver.
— Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
— Consult the dealer or an experienced
radio/TV technician for help.
A minimum separation distance of 20 cm must
be maintained between the antenna and the
person for this appliance to satisfy the RF
exposure requirements.
CAUTION: Changes or modifications not
expressly approved by the party responsible
for compliance could void the user’s authority
to operate the equipment.
OFFICE
TEL
FAX
A/S Inquiry
2F, 120, Gwanak-ro, Gwanak-gu, Seoul
+82 2 888 7060
+82 2 888 7061
+82 2 888 7060
conspins.com
Table of contents
