LaMotte SMART3 User manual

SMART3• QUICK START GUIDE
LAMOTTE PRE-PROGRAMMED TESTS
1. Press and briey hold to turn meter on. Main Menu will appear.
2. Press ENTER to select Testing Menu.
3. Press ENTER to select All Tests menu.
4. Press or to scroll to the desired test.
5. Press ENTER to select the test.
6. Insert the blank. Close the lid. Press ENTER to scan the blank.
7. Insert the reacted sample. Close the lid. Press ENTER to scan the sample. The
result will appear on the screen.
ADD OR DELETE A TEST IN A SEQUENCE
1. Press and briey hold to turn meter on. Main Menu will appear.
2. Press or to the Editing Menu. Press ENTER .
3. Press ENTER to select Edit Sequences.
4. Press or to scroll to the desired sequence and press ENTER .
Add A Test
5. To add a test before or after an existing test, press or to scroll to
the existing test.
6. Press ENTER to select the existing test. Press or to scroll to Insert
Before or Insert After.
7. Press ENTER to select the option. The All Tests menu will appear.
8. Press or to scroll to the test that will be added to the sequence.
9. Press ENTER to select the test. The test will be added to the sequence.
Delete A Test
5. To delete a test, press or to scroll to the test in the sequence.
6. Press ENTER to select the test. Press or to scroll to Delete.
7. Press ENTER to select Delete. The test will be deleted from the sequence.

CREATE A USER TEST
1. Press and briey hold to turn meter on. Main Menu will appear.
2. Press or to the Editing Menu. Press ENTER .
3. Press or to scroll to the Edit User Test. Press ENTER .
4. Press or to scroll to the desired test. Press ENTER .
Name The Test
5. Press ENTER to select Name The Test.
6. Press , and ENTER to select the characters in the test name.
7. Press ENTER after the last character has been selected.
Select Vial/WL
8. Press or to select Vial/WL. Press ENTER .
9. Press or to scroll to the channel with the desired wavelength and
vial size combination. Press ENTER .
Enter 2 Point Calibration
10. Press or to scroll to STD Calibration. Press ENTER .
11. Press , and ENTER to select the characters in the low concentration
followed by the high concentration. Press ENTER .
12. Insert the blank. Press ENTER . Repeat with reacted low and high concentration
standards. Press ENTER .
Select Decimal Places
13. Press or to scroll to Decimal Places. Press ENTER .
14. Press , and ENTER to select the desired number of decimal places.
Press ENTER .
Select Units
15. Press or to scroll to Select Units. Press ENTER .
16. Press or to select the desired units. Press ENTER . The meter will
return to the Edit Test menu. Press EXIT three times to return to the Main
Menu to begin testing.
PO Box 329 • Chestertown • Maryland • 21620 • USA
800-344-3100 • 410-778-3100 (Outside U.S.A.) • Fax: [phone] • www.lamotte.com
© 2010 LaMotte Company • 06.19 • 61910-QG-V3
NOTE: Use the AC wall adapter to rapidly charge the meter.