Standards
Media 10Base-T: UTP Cat. 3, 4, 5 or better
100Base-TX: UTP Cat. 5 or better
1000Base-T: Cat. 5 or better
IEEE IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3ab 1000Base-T
Operating modes
Switching Store and forward
Auto MDI/MDI-X Yes
Transfer mode 10/100/1000 Mbit/s, full/half duplex (auto-sensing)
Transfer rate 10 Mbps: 14.880 pps (64 bytes packets)
100 Mbps: 148.800 pps (64 bytes packets)
1000 Mbps: 1.448.800 pps (64 bytes packets)
Flow control IEEE 802.3x flow control in full-duplex mode
Back pressure flow control in half-duplex mode
Display LEDs: Power, Link/Act, Speed
Throughput 16 GBit/s
Hardware
Power supply 100V - 240V AC, internal power supply unit
Environment Temperature range 0–40°C; humidity 10–90 %; non-condensing
Housing Metal housing, connections on the front; measures 197,2 x 35,3 x 120 mm (W x H x D)
Power consumption (max) max. 10 Watt
Weight 1 kg
Approvals
Conformity CE conform with DIN EN 55022 and DIN EN 55024
Package content
Cable IEC cable
Manual Printed Quick Installation Guide (DE/EN)
Item number
LANCOM GS-1108 61458
Service
Warranty 2 years
Support via hotline und Internet
LANCOM
Systems
GmbH
I Adenauerstr.
20/B2
I 52146 Wuerselen I Germany I E-Mail [email protected] www.lancom.eu
LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. Subject to change without notice. No liability for technical errors and/or omissions.
03/09
LANCOM GS-1108
