LANCOM, LANCOM Systems and LCOS are registeredtrademarks. All other names or descriptions used may be trademarks or registered
trademarks of their owners. Subject to change without notice. No liability for technical errors and/or omissions. 111730/1217
Hardware
Power supply Internal power supply unit (110–230 V, 50-60 Hz)
Power consumption max. 7.9 watts
Environment Temperature range 0–40 °C; humidity 10–90 %; non-condensing
Housing Robust metal housing with screw-on 19“ mounting brackets, network connectors on the front
Number of fans None; fanless design without rotating parts, high MTBF
Interfaces
ETH A8 TP Ethernet-Ports 10 / 100 / 1000 Mbps
A2 Combo-Ports (TP / SFP) 100 / 1000 Mbps (SFP) and 10 / 100 / 1000 Mbps (TP)
A10 concurrent ports in total
Declaration of Conformity
Hereby, LANCOM Systems declares that this device is in compliance with Directives 2014/30/EU and 2014/35/EU.
The full text of the EU declaration of conformity is available at the following internet address: www.lancom-systems.
com/ce/
Package content
Manual Quick Reference Guide (DE/EN), Installation Guide (DE/EN), Cloud-ready sheet, FCC sheet
Mounting brackets Two 19” brackets for rackmounting
Cable IEC power cord, serial conguration cable 1.5 m
MOUNTING AND CONNECTING THE DEVICE
d SFP ports
Off Port inactive
Green Link 1000 Mbps
Orange Link ≤ 100 Mbps
c TP Ethernet ports
Off Port inactive
Green Link 1000 Mbps
Orange Link ≤ 100 Mbps
b Reset button
5 seconds pressed Device restart
10 seconds pressed Device reset and restart
a System
Off Device switched off
Green Device operational
a b c
ConsoleReset
System
LANCOM GS-2310
aSerial connector (Console)
Connect the serial interface via the included serial conguration
cable to the serial interface of the device you want to use for
conguring / monitoring the switch.
bTP Ethernet ports
Connect one of the TP Ethernet ports 1-10 via an Ethernet cable to
your end device or another LAN switch.
cSFP ports
Insert a suitable SFP module (e.g. 1000Base-SX or 1000Base-
LX) into the SFP port. Choose a cable compatible with the SFP
module and connect it as described in the module’s
documentation.
dPower connector (on the back side of the device)
Supply power to the device via the power connector on the
back. Please use the supplied IEC power cable.
Please observe the following when setting up the device
ADo not rest any objects on top of the device and do not stack
multiple devices
AFor devices to be operated on the desktop, please attach the
adhesive rubber footpads
AKeep the ventilation slots on the side of the device clear of obstruction
AMount the device into a 19” unit in a server cabinet
Ports 9 and 10 are combo ports. Either the TP- or the SFP port can be used at the same time.
LANCOM1681V
Power
VDSL
Online
ETH1
ETH2
VPN
ETH3
ETH4
ISDNStatus
Cloud-ready
D
ConsoleReset
System
LANCOM GS-2310
b c d
a
LANCOM GS-2310
Quick Reference Guide
