Land Pride MR 1572 User manual

12
Box Scrapers
6/27/05 305-083S
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
HR15 & MR15 Series (Retractable)
HR MR
1548 1554 1560 1548 1554 1560 1572
Working Width 48” 54” 60” 48” 54” 60” 72”
Weight (Pounds) 460 501 534 420 465 493 615
Number of Shanks 4554557
Shank Penetration 2-positions
(5/8” & 2 5/8” below end plates) 2-positions (3/4” & 3 1/4” below end plates
Lift Mechanism Hydraulic cylinder pivots shank tube to
lift shanks up Mechanical lever lift with spring assist
Side Plates 1/4” thick x 19” high x 29” deep 1/4” thick x 18” high x 27 1/2” deep 3/8” thick x
18” high x
27 1/2” deep
Overall Length 35” (Front to back) 32 5/16” (Front to back)
Height of Moldboard 19”
Shank Material 3/4” x 2 1/2” heat treated spring steel
Shank Tip Construction Replaceable heat treated tips
Grader Blades 1/2” x 6” high carbon, heat treated cutting edges; reversible and replaceable
Maximum H.P. Rating 40 HP for 4 wheel tractors
50 HP for 2 wheel tractors
3-Point Hitch Type Category l & Quick Hitch
HR25 Series (Retractable)
HR2560 HR2566 HR2572
Working Width 60” 66” 72”
Weight (Pounds) 743 797 851
Number of Shanks 567
Shank Penetration 2-positions (3/4” & 3 1/4” below end plates)
Lift Mechanism Hydraulic cylinder pivots shank tube to lift shanks up
Side Plates 3/8” thick x 21” high x 34” deep
Overall Length 41” (Front to back)
Height of Moldboard 21”
Shank Material 3/4” x 2 1/2” heat treated spring steel
Shank Tip Construction Replaceable heat treated tips
Grader Blades 1/2” x 6” high carbon, heat treated cutting edges; reversible and
replaceable
Maximum H.P. Rating 50 HP for 4-wheel drive tractors
60 HP for 2-wheel drive tractors
Hitch Type Category l & Quick Hitch
305-083S