Lanner Ics-p371a User manual

LEC-6041 User Manual

ICS-P371 User Manual

Preliminary Draft

Version: 1.0

Date of Release:2023-01-19

Industrial Communication Platforms

Next Generation Industrial Cyber Security Solutions

ICS-P371 User Manual

This manual describes the overview of the various functionalities of this product, and the information you

need to get it ready for operation. It is intended for those who are:

-responsible for installing, administering and troubleshooting this system or Information Technology

professionals.

-assumed to be qualified in the servicing of computer equipment, such as professional system integrators,

or service personnel and technicians.

The latest version of this document can be found on Lanner’s official website, available either through the

product page or through the Lanner Download Center page with a login account and password.

The icons are used in the manual to serve as an indication of interest topics or important messages.

Icon

Usage

This mark indicates that there is something you should pay special

attention to while using the product.

This mark indicates that there is a caution or warning and it is

something that could damage your property or product.

To obtain additional documentation resources and software updates for your system, please visit the Lanner

Download Center. As certain categories of documents are only available to users who are logged in, please

be registered for a Lanner Account at http://www.lannerinc.com/ to access published documents and

downloadable resources.

In addition to contacting your distributor or sales representative, you could submit a request at our Lanner

Technical Support and fill in a support ticket to our technical support department.

Your feedback is valuable to us, as it will help us continue to provide you with more accurate and relevant

documentation. To provide any feedback, comments or to report an error, please email

[email protected]m. Thank you for your time.

Note or Information

Warning or Important

ICS-P371 User Manual

Taiwan Corporate Headquarters

Lanner Electronics Inc.

7F, No.173, Sec.2, Datong Rd.

Xizhi District, New Taipei City 22184,

Taiwan

立端科技股份有限公司

221 新北市汐止區

大同路二段 173 號7樓

T: +886-2-8692-6060

F: +886-2-8692-6101

E: [email protected]m

China

Beijing L&S Lancom Platform Tech. Co., Ltd.

Guodong LOFT 9 Layer No. 9 Huinan Road,

Huilongguan Town, Changping District, Beijing

102208 China

T: +86 010-82795600

F: +86 010-62963250

E: service@ls-china.com.cn

USA

Lanner Electronics Inc.

47790 Westinghouse Drive

Fremont, CA 94539

T: +1-855-852-6637

F: +1-510-979-0689

E: sales_us@lannerinc.com

Canada

Lanner Electronics Canada Ltd

3160A Orlando Drive

Mississauga, ON

L4V 1R5 Canada

T: +1 877-813-2132

F: +1 905-362-2369

E: sales_ca@lannerinc.com

Europe

Lanner Europe B.V.

Wilhelmina van Pruisenweg 104

2595 AN The Hague

The Netherlands

T: +31 70 701 3256

E: sales_eu@lannerinc.com

ICS-P371 User Manual

reserves the right to make improvements to the products described in this manual at any time without notice. No part

of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior

written permission of the original manufacturer. Information provided in this manual is intended to be accurate and

reliable. However, the original manufacturer assumes no responsibility for its use, nor for any infringements upon the

rights of third parties that may result from such use.

Intel® and Intel® Atom® are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other countries.

Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.

All other product names or trademarks are properties of their respective owners.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

FCC Caution

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Note

1. An unshielded-type power cord is required to meet FCC emission limits and to prevent interference to the nearby

radio and television reception. It is essential that only the supplied power cord be used.

2. Use only shielded cables to connect I/O devices to this equipment.

3. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

Important

1. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

2. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules.

ICS-P371 User Manual

Follow these guidelines to ensure general safety:

Keep the chassis area clear and dust-free during and after installation.

Do not wear loose clothing or jewelry that could get caught in the chassis. Fasten your tie or scarf and roll up your

sleeves.

Wear safety glasses if you are working under any conditions that might be hazardous to your eyes.

Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.

Disconnect all power by turning off the power and unplugging the power cord before installing or removing a chassis

or working near power supplies

Do not work alone if potentially hazardous conditions exist.

Never assume that power is disconnected from a circuit; always check the circuit.

Suivez ces consignes pour assurer la sécuritégénérale :

Laissez la zone du châssis propre et sans poussière pendant et après l’installation.

Ne portez pas de vêtements amples ou de bijoux qui pourraient être pris dans le châssis. Attachez votre cravate ou

écharpe et remontez vos manches.

Portez des lunettes de sécurité pour protéger vos yeux.

N’effectuez aucune action qui pourrait créer un danger pour d’autres ou rendre l’équipement dangereux.

Coupez complètement l’alimentation en éteignant l’alimentation et en débranchant le cordon d’alimentation avant

d’installer ou de retirer un châssis ou de travailler à proximité de sources d’alimentation.

Ne travaillez pas seul si des conditions dangereuses sont présentes.

Ne considérez jamais que l’alimentation est coupée d’un circuit, vérifiez toujours le circuit. Cet appareil génère, utilise

et émet une énergie radiofréquence et, s’il n’est pas installé et utilisé conformément aux instructions des fournisseurs

de composants sans fil, il risque de provoquer des interférences dans les communications radio.

There is risk of Explosion if Battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions.

Installation only by a skilled person who knows all Installation and Device Specifications which are to be applied.

Do not carry the handle of power supplies when moving to another place.

Please conform to your local laws and regulations regarding safe disposal of lithium BATTERY.

Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery can result in an explosion.

Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the

leakage of flammable liquid or gas.

A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid

or gas.

Risque d’explosion si la pile est remplacée par une autre d’un mauvais type.

Jetez les piles usagées conformément aux instructions.

L’installation doit être effectuée par un électricien formé ou une personne formée à l’électricité connaissant toutes

les spécifications d’installation et d’appareil du produit.

Ne transportez pas l’unité en la tenant par le câble d’alimentation lorsque vous déplacez l’appareil.

Electrical equipment generates heat. Ambient air temperature may not be adequate to cool equipment to acceptable

operating temperatures without adequate circulation. Be sure that the room in which you choose to operate your

system has adequate air circulation.

Ensure that the chassis cover is secure. The chassis design allows cooling air to circulate effectively. An open chassis

permits air leaks, which may interrupt and redirect the flow of cooling air from internal components.

Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. ESD damage occurs when

electronic components are improperly handled and can result in complete or intermittent failures. Be sure to follow

ESD-prevention procedures when removing and replacing components to avoid these problems.

Wear an ESD-preventive wrist strap, ensuring that it makes good skin contact. If no wrist strap is available, ground

yourself by touching the metal part of the chassis.

Periodically check the resistance value of the antistatic strap, which should be between 1 and 10 megohms (Mohms).

ICS-P371 User Manual

L’équipement électrique génère de la chaleur. La température ambiante peut ne pas être adéquate pour refroidir

l’équipement à une température de fonctionnement acceptable sans circulation adaptée. Vérifiez que votre site

propose une circulation d’air adéquate.

Vérifiez que le couvercle du châssis est bien fixé. La conception du châssis permet à l’air de refroidissement de bien

circuler. Un châssis ouvert laisse l’air s’échapper, ce qui peut interrompre et rediriger le flux d’air frais destiné aux

composants internes.

Les décharges électrostatiques (ESD) peuvent endommager l’équipement et gêner les circuits électriques. Des dégâts

d’ESD surviennent lorsque des composants électroniques sont mal manipulés et peuvent causer des pannes totales

ou intermittentes. Suivez les procédures de prévention d’ESD lors du retrait et du remplacement de composants.

Portez un bracelet anti-ESD et veillez à ce qu’il soit bien au contact de la peau. Si aucun bracelet n’est disponible,

reliez votre corps àla terre en touchant la partie métallique du châssis.

Vérifiez régulièrement la valeur de résistance du bracelet antistatique, qui doit être comprise entre 1 et 10 mégohms

(Mohms).

Mounting Installation Precaution

Do not install and/or operate this unit in any place that flammable objects are stored or used in.

If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may

be greater than room ambient. Therefore, consideration should be given to installing the equipment in an

environment compatible with the maximum ambient temperature (Tma) specified by the manufacturer.

Installation of the equipment (especially in a rack) should consider the ventilation of the system’s intake (for taking

chilled air) and exhaust (for emitting hot air) openings so that the amount of airflow required for safe operation of

the equipment is not compromised.

To avoid a hazardous load condition, be sure the mechanical loading is even when mounting.

Consideration should be given to the connection of the equipment to the supply circuit and the effect that

overloading of the circuits might have on over-current protection and supply wiring. Appropriate consideration of

equipment nameplate ratings should be used when addressing this concern.

Reliable earthing should be maintained. Particular attention should be given to supply connections other than direct

connections to the branch circuit (e.g., use of power strips).

Installation & Operation:

This equipment must be grounded. The power cord for product should be connected to a socket-outlet with earthing

connection.

Cet équipement doit être mis àla terre. La fiche d'alimentation doit être connectée àune prise de terre correctement

câblée

Suitable for installation in Information Technology Rooms in accordance with Article 645 of the National Electrical

Code and NFPA 75.

Peut être installédans des salles de matériel de traitement de l'information conformément àl'article 645 du National

Electrical Code et àla NFPA 75.

The machine can only be used in a restricted access location and must be installed by a skilled person.

Les matériels sont destinés àêtre installés dans des EMPLACEMENTS À ACCÈS RESTREINT.

Warning

Class I Equipment. This equipment must be earthed. The power plug must be connected to a properly wired earth

ground socket outlet. An improperly wired socket outlet could place hazardous voltages on accessible metal parts.

“Product shall be used with Class 1 laser device modules.”

Avertissement

Équipement de classe I. Ce matériel doit être relié à la terre. La fiche d’alimentation doit être raccordée à une prise de

terre correctement câblée. Une prise de courant mal câblée pourrait induire des tensions dangereuses sur des parties

métalliques accessibles.

“Le produit doit être utilisé avec des modules de dispositifs laser de classe 1.”

ICS-P371 User Manual

Before turning on the device, ground the grounding cable of the equipment. Proper grounding (grounding) is very

important to protect the equipment against the harmful effects of external noise and to reduce the risk of electrocution

in the event of a lightning strike. To uninstall the equipment, disconnect the ground wire after turning off the power. A

ground wire is required and the part connecting the conductor must be greater than 4 mm2 or 10 AWG.

Avant d’allumer l’appareil, reliez le câble de mise à la terre de l’équipement à la terre.

Une bonne mise à la terre (connexion à la terre) est très importante pour protéger l’équipement contre les effets

néfastes du bruit externe et réduire les risques d’électrocution en cas de foudre.

Pour désinstaller l’équipement, débranchez le câble de mise à la terre après avoir éteint l’appareil.

Un câble de mise à la terre est requis et la zone reliant les sections du conducteur doit faire plus de 4 mm2 ou 10

AWG.

Loosen the screw of the earthing point.

Connect the grounding cable to the ground.

The protection device for the power source must provide 30 A current.

This protection device must be connected to the power source before power.

The cable hould 16 AWG

Desserrez la vis du terminal de mise àla terre.

Branchez le câble de mise àla terre àla terre.

L’appareil de protection pour la source d’alimentation doit fournir 30 A de courant.

Cet appareil de protection doit être branché à la source d’alimentation avant

l’alimentation.

Le câble doit 16 AWG

ICS-P371 User Manual 
8 
 
 
 
Package Content...........................................................................................................................9 
Ordering Information ...................................................................................................................9 
Optional Accessories ....................................................................................................................9 
System Specifications.................................................................................................................10 
Top & Front Panel.......................................................................................................................11 
Motherboard Information..........................................................................................................12 
 
Opening the Chassis ...................................................................................................................16 
Installing the SATA Storage (Optional).......................................................................................18 
Installing the LTE/5G Module (Optional)....................................................................................20 
Installing the Wi-Fi Module (Optional).......................................................................................24 
Installing the IPMI Module (Optional)........................................................................................26 
Installing the SD Card .................................................................................................................27 
DIN Rail Mounting (Optional).....................................................................................................28 
 
BIOS Setup..................................................................................................................................29 
Main Page...................................................................................................................................30 
Advanced Page ...........................................................................................................................31 
 
Warranty Policy ..........................................................................................................................62 
 
 

ICS-P371 User Manual

ICS-P371 Series is empowered by Intel® Atom™ X6211E/X6413E/X6425E CPU (formerly Elkhart Lake) for

enhanced IoT platform and high processing performance. As the next-generation industrial cybersecurity

gateway, ICS-P371 possesses several key hardware features, including advanced LAN bypass technology,

Chassis Intrusion Detect, and TPM 2.0 onboard. ICS-P371 is compliant with IEC 61850-3 and IEEE 1613 and

can operate in a wide range of operating temperatures from -40°C to 70°C.

Your package contains the following items:

1x ICS-P371 Cyber Security Platform

1x Console Cable

1x 6-pin Terminal Block mating connector with screws for power input

SKU No.

Main Features

ICS-P371A