Lantronix PremierWave 2050 User manual

PremierWave® 2050 Quick Start Guide
2. HARDWARE INSTALLATION—HOW TO ASSEMBLE
1. Aach the antenna(s) to the evaluaon board.
2. Connect the unit to the network via the supplied Ethernet cable(RJ45) using the
Ethernet port.
3. Supply power to the device by using the included power adapter.
4. Easily connect to the PremierWave 2050 via a mobile device or a computer with
Wi‐Fi capability as outlined below.
! Thank you for choosing Lantronix. Please register the PremierWave 2050 Enterprise Wi‐Fi module to
receive noficaons for firmware and documentaon updates at www.lantronix.com/product‐registraon.
WHAT’S IN THE BOX
External
Antenna(e) with
RP‐SMA Connector
START
GUIDE
PremierWave 2050
Evaluaon Kit
Quick Start
Guide
RJ‐45 Ethernet
Straight
Cat5 Cable
5V Power Supply
With
Regional Adapters
Top View
Serial Ports
Serial Ports
Mini Type‐B USB port
connector for power
Mini Type‐B USB port
connector
Status LEDs
Power
connector
RJ45 Ethernet Port

PremierWave® 2050 Quick Start Guide
3. CONNECT TO WEB MANAGER
The unit can also be configured using the Command Line Interface (CLI).
The CLI is accessible via Telnet/SSH or via the Serial Port.
For detailed instrucons, please refer to the PremierWave 2050 User
Guide and Command Reference Guide: hp://www.lantronix.com/
support/downloads.
The steps below outline mechanism to access the web manager in order to configure the PremierWave 2050 device.
4. COMPLETE THE CONFIGURATION
Connue with the rest of the unit configuraon using the Web User
Interface(UI).
Context sensive help is available in‐line within the Web UI.
Note: Please change the admin access password from the factory
Contact
Technical support Visit hp://www.lantronix.com/support
Latest Firmware For the latest firmware downloads, visit hp://www.lantronix.com/support/downloads
IP Address Assignment Tutorial To view a tutorial on how to assign an IP address, visit hp://www.lantronix.com/support/tutorials
© 2023 Lantronix, Inc. Lantronix and PremierWave are registered trademarks of Lantronix, Inc. All other trademarks are the property of
respecve owners. Specificaons subject to change without noce. 900‐773‐R Rev B
Connect to 192.168.0.1 using
your browser. The default USER
ID = admin and PASSWORD =
PASS (both are case sensive)
Connect to SSID PW2050‐
XXXX, where XXXX refers to
the SN on the evaluaon
board
In the Quick Setup page, bridging and wireless interfaces can be
configured. Bridging can be enabled and the Premierwave 2050 can be
connected to a network from the list of available wireless networks.
Your inial setup is now
complete and the
Premierwave 2050 is
now configurable
through the web
manager.
1
2
1
3
1
4
PW2050‐XXXX
1
1