Lantronix SISPM1040-3 L Series User manual

SISPM1040-3xxx-L
Managed Hardened Gigabit Ethernet PoE+ Rack
Mountable Switches
SISPM1040-3166-L Managed Hardened PoE+ Switch, (16) 10/100/1000Base-T PoE+ ports +
(4) 100/1000Base-X SFP + (2) 1G/10G SFP+
SISPM1040-3248-L Managed Hardened PoE+ Switch, (24) 10/100/1000Base-T PoE+ ports +
(4) 100/1000Base-X SFP + (4) 1G/10G SFP+
Install Guide
Part Number 33762
Revision G April 2022

Lantronix SISPM1040-3xxx-L Install Guide
33762 Rev. G https://www.lantronix.com/ Page 2of 48
Intellectual Property
© 2022 Lantronix, Inc. All rights reserved. No part of the contents of this publication may be transmitted or
reproduced in any form or by any means without the written permission of Lantronix.
Lantronix is a registered trademark of Lantronix, Inc. in the United States and other countries.
Patented: https://www.lantronix.com/legal/patents/; additional patents pending.
Warranty
For details on the Lantronix warranty policy, go to our web site at http://www.lantronix.com/support/warranty.
Contacts
Lantronix Corporate Headquarters
7535 Irvine Center Drive
Suite100
Irvine, CA 92618, USA
Toll Free: 800-526-8766
Phone: [phone]
Fax: [phone]
Technical Support
Online: https://transition.com/support/
Sales Offices
For a current list of our domestic and international sales offices, go to the Lantronix web site at
www.lantronix.com/about/contact.
Disclaimer
All information contained herein is provided “AS IS.” Lantronix undertakes no obligation to update the information in
this publication. Lantronix does not make, and specifically disclaims, all warranties of any kind (express, implied or
otherwise) regarding title, non-infringement, fitness, quality, accuracy, completeness, usefulness, suitability or
performance of the information provided herein. Lantronix shall have no liability whatsoever to any user for any
damages, losses and causes of action (whether in contract or in tort or otherwise) in connection with the user’s
access or usage of any of the information or content contained herein. The information and specifications
contained in this document are subject to change without notice.
Revision History
Date
Rev.
Comments
12/18/20
E
Correct humidity specs.
3/15/21 F
FW v8.50.0012: Include one step FW version update. Modify "Always On PoE" behavior to be
enabled and displayed on Web UI after upgrade to FW v8.50.0018 or above. Fix API issues.
4/12/22
G
Initial Lantronix rebrand. Update port descriptions.

Lantronix SISPM1040-3xxx-L Install Guide
33762 Rev. G https://www.lantronix.com/ Page 3of 48
Safety Warnings and Cautions
These products are not intended for use in life support products where failure of a product could reasonably be expected to
result in death or personal injury. Anyone using this product in such an application without express written consent of an
officer of Lantronix does so at their own risk and agrees to fully indemnify Lantronix for any damages that may result from such
use or sale.
Attention: this product, like all electronic products, uses semiconductors that can be damaged by ESD (electrostatic
discharge). Always observe appropriate precautions when handling.
NOTE: Emphasizes important information or calls your attention to related features or instructions.
WARNING: Alerts you to a potential hazard that could cause personal injury.
CAUTION: Alerts you to a potential hazard that could cause loss of data or damage the system or equipment.

Lantronix SISPM1040-3xxx-L Install Guide
33762 Rev. G https://www.lantronix.com/ Page 4of 48
Contents
Safety Warnings and Cautions.......................................................................................................................3
Chapter 1 - Introduction .................................................................................................................................5
About This Manual................................................................................................................................................... 5
Related Manuals...................................................................................................................................................... 5
Key Features ........................................................................................................................................................... 6
Benefits.................................................................................................................................................................... 6
Ordering Information................................................................................................................................................ 7
Specifications .......................................................................................................................................................... 7
Software Features ................................................................................................................................................. 17
Applications ........................................................................................................................................................... 21
Front Panels .......................................................................................................................................................... 22
LED Descriptions ............................................................................................................................................... 23
Reset Button ...................................................................................................................................................... 24
Back Panels........................................................................................................................................................... 25
Chapter 2 – Installing the Switch..................................................................................................................26
Package Contents ................................................................................................................................................. 26
Regional Versions of Power Cords ....................................................................................................................... 26
Safety Instructions for Rack Mount Installations ................................................................................................... 26
Mounting the Switch in a 19-inch Rack ................................................................................................................. 27
Mounting the Switch on Desk or Shelf .................................................................................................................. 27
Installing SFP Modules.......................................................................................................................................... 28
Connecting Powered Devices (PDs) ..................................................................................................................... 28
Connecting Power ................................................................................................................................................. 28
Connecting the AC Power Cord ............................................................................................................................ 29
Connecting the DC Power Cord ............................................................................................................................ 30
Connecting the DI/DO Relay Wires ....................................................................................................................... 31
Power Supply Specifications ................................................................................................................................. 33
Chapter 3 - Initial Switch Configuration........................................................................................................38
Initial Switch Configuration via Web Browser........................................................................................................ 38
Initial Switch Configuration via CLI........................................................................................................................ 39
Chapter 4 - Troubleshooting ........................................................................................................................40
Basic Troubleshooting ........................................................................................................................................... 40
Troubleshooting PoE Problems............................................................................................................................. 40
Troubleshooting Table........................................................................................................................................... 41
LED Troubleshooting............................................................................................................................................. 42
Device Label and Packaging Label ....................................................................................................................... 43
Record Device and System Information................................................................................................................ 44
Chapter 5 - Regulatory and Safety Information ............................................................................................45
Compliance and Safety Statements ...................................................................................................................... 45
Declaration of Conformity ...................................................................................................................................... 45
Class I, Division 2 / classe I, division 2.................................................................................................................. 46
High Risk Activities Disclaimer .............................................................................................................................. 46
Cautions and Warnings ......................................................................................................................................... 46
Electrical Safety Warnings..................................................................................................................................... 47

Lantronix SISPM1040-3xxx-L Install Guide
33762 Rev. G https://www.lantronix.com/ Page 5of 48
Chapter 1 - Introduction
The SISPM1040-3xxx-L switches are next-generation rack mount industrial grade Ethernet switches offering
powerful L2 and basic L3 features with advanced functionality and usability. In addition to extensive management
features, the SISPM1040-3xxx-L also provide Carrier Ethernet features such as OAM, CFM, ERPS, EPS, and PTPv2
which makes it suitable for industrial and Carrier Ethernet applications.
The SISPM1040-3248-L is a managed Hardened PoE+ Switch provides (24) 10/100/1000 PoE+ ports, (4) 100/1000
dual speeds SFP ports with additional (4) 1G/10G SFP+ slots; it supplies up to 370W PoE budget over 24 PoE+ ports.
The SISPM1040-3166-L is a managed Hardened PoE+ Switch provides (16) 10/100/1000 PoE+ ports, (4) 100/1000
dual speeds SFP ports with additional (2) 1G/10G SFP+ slots; it supplies up to 250W PoE budget over 16 PoE+ ports.
About This Manual
This manual describes how to install, initially configure, and troubleshoot the switch, including how to:
•Install the switch,
•Check switch status by reading the LEDs,
•Reset the switch or restore the switch to factory defaults,
•Use a Web browser or the CLI to initially configure the switch, and
•Troubleshoot the switch.
Note that this manual provides links to third party web sites for which Lantronix is not responsible.
Related Manuals
A printed Quick Start Guide is shipped with each device.
For Lantronix Drivers, Firmware, etc. go to the Product Support webpage (logon required).
For Lantronix Manuals, Brochures, Data Sheets, etc. go to the Support Library (no logon required).
For SFP manuals see Lantronix SFP webpage.
Other related manuals are listed below.
•SISPM1040-3xxx-L Quick Start Guide, 33761
•SISPM1040-3xxx -L Web User Guide, 33763
•SISPM1040-3xxx -L CLI Reference, 33764
•PS-DC-DUAL-56xxT 340W Standalone Power Supply Install Guide, 33788
•PS-DC-DUAL-56xxT 340W Standalone Power Supply Quick Start Guide, 33792
•SISPM1040-3248-L and 3166-L API User Guide, 33831
•Release Notes (version specific)

Lantronix SISPM1040-3xxx-L Install Guide
33762 Rev. G https://www.lantronix.com/ Page 6of 48
Key Features
DMS (Device Management System) built in
Compliant with IEEE 802.3af PoE and 802.3at PoE+
PoE Configuration, PoE Scheduling, PoE Power Delay, and PoE Auto Power Reset, Always on PoE
IEEE 1588v2 PTP (TC)
IEEE 802.3ah OAM and IEEE 802.1ag CFM
ITU-T Y.1564 (RFC2544) Ethernet Service Activation Test
ITU-T G.8031 Ethernet Linear Protection Switching (EPS)
ITU-T G.8032 Ethernet Ring Protection Switching (ERPS)
DHCP Server, DHCP per Port, DHCP Relay, and DHCP Snooping
IPv4/IPv6 L3 Static route
SCP (Secure Copy Protocol)
Shared and Independent VLAN Learning (SVL and IVL)
Rapid Ring, MRP, and MRP Rings
Benefits
Feature-rich Carrier Ethernet Switch for Metro Ethernet: The switch delivers advanced functionality
including IEEE 1588v2, OAM, CFM, etc. It also has enhanced security features such as IP source guard and
Access Control List to guard your network from unwanted or unauthorized access.
Exceptional Precision with IEEE 1588v2 (TC): The switch performs IEEE1588v2 with transparent clock
capability, implementations in hardware, so there is no performance penalty on packet processing.
The hardware architecture ensures low latency and high time accuracy, which is critical for delay-sensitive
financial and mobile applications.
ITU-T G.8032 (ERPS): Ethernet Ring Protection Switching (ERPS) is an effort at ITU-T under G.8032
Recommendation to provide sub-50ms protection and recovery switching for Ethernet traffic in a ring
topology and at the same time ensuring that there are no loops formed at the Ethernet layer.
Superior reliability via OAM and CFM for Service Assurance: Service assurance is provided through a rich
feature set of operations, administration, and maintenance (OAM) functionalities. This Ethernet access
device also offers standards-based fault and performance management in adherence with 1731 PM and
802.1ag connectivity fault management (CFM) standards. It comes with RFC 2544 and Y.1564 support and
includes both traffic generation and traffic reflection. These features significantly reduce operational
expenditures and allow for troubleshooting without expensive truck rolls.

Lantronix SISPM1040-3xxx-L Install Guide
33762 Rev. G https://www.lantronix.com/ Page 7of 48
Ordering Information
Model
Description
SISPM1040-3248-L
24-port Gigabit PoE+, 4 100/1000 Base-X SFP, 4 1G/10G SFP+, 370 Watts
SISPM1040-3166-L
16- port Gigabit PoE+, 4 100/1000 Base-X SFP, 2 1G/10G SFP+, 250 Watts
Optional Accessories (sold separately)
PS-DC-DUAL-5624T
Hardened 340 Watt Isolated Power Supply with 56VDC and 24VDC Dual Output
25104
Input 85-264 VAC, 124-370 VDC; Output: 48 ~ 55 VDC, 5A, 240 Watts (Optional
Second Power Supply)
25160
Input: 90-264 VAC, 127-370 VDC; Output: 48 ~ 55 VDC, 10A, 340 Watts (Optional
Second Power Supply)
SISPM1040-3248-L-xx
Optional Power Cord; order separately where xx = NA, JP, etc.
EDCA-DIO-01
Enclosure Door Contact Alarm
SFPs
See Lantronix SFP webpage.
Specifications
Port Configuration
Model
Total
Ports
RJ45
(10M/100M/1G)
SFP
(100/1000 Base-X)
Uplinks SFP+
(1G/10G)
Console
SISPM1040-3248-L 32 24 4 4 RJ45
SISPM1040-3166-L 22 16 4 2 RJ45
Hardware Performance
Model Forwarding Capacity Switching Capacity Mac Table Jumbo Frames
SISPM1040-3248-L 101.19Mpps 136 Gbps 32 K 10056 Bytes
SISPM1040-3166-L 59.523Mpps 80Gbps 32 K 10056 Bytes
Environmental Range
Model Operating Temp.
Operating
Humidity
Storage
Temp
Storage
Humidity
Altitude
SISPM1040-3248-L
SISPM1040-3166-L
-40°C to +75°C (with 1G SFPs)
-40°C to +60°C (with 10G SFPs)
10 to 95%
RH
-40 to 85°C
10 to 95%
RH
< 3000m
Dimensions, Weights, Humidity
Model Dimensions (WxHxD) Weight Operating Humidity
Inches / Millimeters Pounds / Kilograms
SISPM1040-3248-L
17.4 x 1.73 x 11.81”
442 x 44 x 300 mm
11.02 lbs. / 5 kg. 10 to 95% Non-condensing
SISPM1040-3166-L
17.4 x 1.73 x 11.81”
442 x 44 x 300 mm
10.58 lbs. / 4.8 kg. 10 to 95% Non-condensing

Lantronix SISPM1040-3xxx-L Install Guide
33762 Rev. G https://www.lantronix.com/ Page 8of 48
Voltage and Frequency
Model
AC Input Voltage and Frequency DC Input Voltage
SISPM1040-3248-L
SISPM1040-3166-L
100-250 VAC, 50~60 Hz 52 – 57 VDC
PoE Power
Model Available PoE Power # of Ports that Support PoE (15.4W) and PoE+ (30.0W)
SISPM1040-3248-L
370W (DC Input) Each of port 1- 24 supports PoE/ PoE+ within available PoE Power
Max PoE Budget
370 Watts (PoE power not available with use of AC power supply).
15 Watts for (24) ports simultaneously.
30 Watts for (12) ports simultaneously.
SISPM1040-3166-L
250W (DC Input) Each of port 1- 16 support PoE/ PoE+ within available PoE Power
Max PoE Budget
Max PoE Budget 250 Watts (PoE power not available with use of AC
power supply)
15 Watts for (16) ports simultaneously
30 Watts for (8) ports simultaneously
Regulatory Compliance
Regulatory Compliance
EMS
EN61000-4-2 ESD, EN61000-4-3 RS, EN61000-4-4 EFT, EN61000-4-5 (for RJ45 Port, Surge 6KV),
EN61000-4-6 CS, EN61000-4-8 PFMF
EMI
FCC Part 15 Class A
47 CFR FCC Part 15 Subpart B. ANSI C63.4: 2014. ICES-003 Issue 6. ANSI C63.4:2014.
Harmonized
Standards
EN 55032: 2015+AC: 2016 (Class A)
CISPR 32: 2015+COR1 2016 (Class A)
EN 55024: 2010+A1: 2015
EN 55035: 2017
EN 61000-3-2: 2014
EN 61000-3-3: 2013
(CE DoC Test
Report)
Emission:
EN 55032: 2015+AC: 2016
CISPR 32: 2015+COR1: 2016
EN 61000-3-2: 2014
EN 61000-3-3: 2013
AS/NZS CISPR 32: 2015
Immunity:
EN 55024: 2010+A1: 2015
EN 55035: 2017
(IEC 61000-4-2: 2008. IEC 61000-4-3: 2006+A1: 2007+A2: 2010. IEC 61000-4-4: 2012. IEC
61000-4-5: 2014+A1: 2017. IEC 61000-4-6: 2013+COR1: 2015. IEC 61000-4-8: 2009. IEC 61000-
4-11: 2004+A1: 2017.)
Safety
CE, EN60950, EN62368, IEC 62368-1:2014, UL Listed

Lantronix SISPM1040-3xxx-L Install Guide
33762 Rev. G https://www.lantronix.com/ Page 9of 48
Compliance
Agency
FCC Class A; CE; Safety: EN60950, NEMA TS-2 and UL
NEMA TS 2-2016 (2.2.7 Transients Temperature and Humidity). 2.2.8 Vibration. 2.2.9 Shock).
Compliant
Agency
IEC61850-3, IEEE 1613, UL, Class 1 Div 2
Mechanical Stability
Vibration
IEC 60068-2-6
Shock
IEC 60068-2-27
Freefall
IEC 60068-2-32
Industry Standards
Standard
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.3ae, IEEE 802.3x, IEEE 802.3ad, IEEE 802.3D,
IEEE 802.3w, IEEE 802.3s, IEEE 802.3Q, IEEE 802.3p, IEEE 802.3ad, IEEE 802.3AB, IEEE 802.3af,
IEEE 802.3at
MTBF
Model
MTBF at 25.00 deg.
Environment GB, GC - Ground Benign,
Controlled
MTBF at 75.00 deg.
Environment GB, GC - Ground Benign,
Controlled
SISPM1040-3248-L
SISPM1040-3166-L
229,072 Hours 46,858 Hours

Lantronix SISPM1040-3xxx-L Install Guide
33762 Rev. G https://www.lantronix.com/ Page 10 of 48
Power Consumption:
SISPM1040-3166-L Maximum Power Consumption (without PoE): 36 Watts
SISPM1040-3248-L Maximum Power Consumption (without PoE): 36 Watts
No Load:
Voltage Current Watt
12V
1.2A
14.4W
Full Load:
Test Voltage Current Watt
12V
2.22A
26.64W
DC Power Consumption:
DC power consumption measured after 60 minutes under full loading with wire speed forwarding.
Switch Power: 12V
Status Operating
Interface
DC Current
Consumption
(A)
DC
Voltage
(V)
DC Power
Consumption
(W)
BTU/hr
Non-loading None 0.90 12.13 10.92 37.24
Standby mode
1G TP Port x 24
1G SFP x 4
10G SFP x 4
1.63 12.13 19.77 67.42
Full-loading
60 minutes later
1G TP Port x 24
1G SFP x 4
10G SFP x 4
1.86 12.13 22.56 76.93
PoE Power:
Status Operating
Interface
DC Current
Consumption
(A)
DC
Voltage
(V)
DC Power
Consumption
(W)
BTU/hr
Non-loading None 0.07 54.7 3.83 13.06
Standby mode
1G TP Port x 24
1G SFP x 4
10G SFP x 4
6.80 54.7 371.96 1268.38
Full-loading
60 minutes later
1G TP Port x 24
1G SFP x 4
10G SFP x 4
6.81 54.7 372.51 1270.26
Only DC Power：

Lantronix SISPM1040-3xxx-L Install Guide
33762 Rev. G https://www.lantronix.com/ Page 11 of 48
52V DC
Status Operating
Interface
DC Current
Consumption
(A)
DC
Voltage
(V)
DC Power
Consumption
(W)
Non-loading None 0.43 52 22.36
Standby mode
1G TP Port x 24
1G SFP x 4
10G SFP x 4
8.01 52 416.52
Full-loading
60 minutes later
1G TP Port x 24
1G SFP x 4
10G SFP x 4
8.10 52 421.20
Non-PoE
Standby mode
1G TP Port x 24
1G SFP x 4
10G SFP x 4
0.61 52 31.72
Non-PoE
Full-loading
60 minutes later
1G TP Port x 24
1G SFP x 4
10G SFP x 4
0.70 52 36.40
54V DC
Status Operating
Interface
DC Current
Consumption
(A)
DC
Voltage
(V)
DC Power
Consumption
(W)
Non-loading None 0.43 54 23.22
Standby mode
1G TP Port x 24
1G SFP x 4
10G SFP x 4
7.96 54 429.84
Full-loading
60 minutes later
1G TP Port x 24
1G SFP x 4
10G SFP x 4
8.05 54 434.70
Non-PoE
Standby mode
1G TP Port x 24
1G SFP x 4
10G SFP x 4
0.60 54 32.40
Non-PoE
Full-loading
60 minutes later
1G TP Port x 24
1G SFP x 4
10G SFP x 4
0.67 54 36.18

Lantronix SISPM1040-3xxx-L Install Guide
33762 Rev. G https://www.lantronix.com/ Page 12 of 48
57V DC
Status Operating
Interface
DC Current
Consumption
(A)
DC
Voltage
(V)
DC Power
Consumption
(W)
Non-loading None 0.41 57 23.37
Standby mode
1G TP Port x 24
1G SFP x 4
10G SFP x 4
7.92 57 451.44
Full-loading
60 minutes later
1G TP Port x 24
1G SFP x 4
10G SFP x 4
8.01 57 456.57
Non-PoE
Standby mode
1G TP Port x 24
1G SFP x 4
10G SFP x 4
0.57 57 32.49
Non-PoE
Full-loading
60 minutes later
1G TP Port x 24
1G SFP x 4
10G SFP x 4
0.64 57 36.48

Lantronix SISPM1040-3xxx-L Install Guide
33762 Rev. G https://www.lantronix.com/ Page 13 of 48
AC Power Consumption:
AC power consumption measured after 60 minutes under full loading with wire speed forwarding.
1. 100V AC Input
Status Operating Interface
AC Voltage
(V)
AC Current
Consumption
(A)
Power
Factor
Apparent
Power (VA)
Real Power
(W)
Non
-loading None
100
0.14
1.00
14.00 14.00
Non-PoE
Standby mode
1 minute
1G TP Port x 24
1G SFP x 4
10G SFP x 4
100
0.31
0.96
31.00 29.76
Non-PoE
Full
-loading
60 minutes later
1G TP Port x 24
1G SFP x 4
10G SFP x 4
100
0.35
1
35.00 35.00
Note: Apparent Power (VA) = AC Voltage x AC Current Consumption.
Real Power (W) = Apparent Power (VA) x Power Factor.
2. 110V AC Input
Status Operating Interface
AC Voltage
(V)
AC Current
Consumption
(A)
Power
Factor
Apparent
Power (VA)
Real Power
(W)
Non
-loading None
110
0.14
0.93
15.40 14.32
Non-PoE
Standby mode
1 minute
1G TP Port x 24
1G SFP x 4
10G SFP x 4
110
0.28
1
30.80 30.80
Non-PoE
Full
-loading
60
minutes later
1G TP Port x 24
1G SFP x 4
10G SFP x 4
110
0.32
1
35.20 35.20
Note: Apparent Power (VA) = AC Voltage x AC Current Consumption.
Real Power (W) = Apparent Power (VA) x Power Factor.

Lantronix SISPM1040-3xxx-L Install Guide
33762 Rev. G https://www.lantronix.com/ Page 14 of 48
3. 220V AC Input
Status Operating Interface
AC Voltage
(V)
AC Current
Consumption
(A)
Power
Factor
Apparent
Power (VA)
Real Power
(W)
Non
-loading None
220
0.10
0.72
22.00 15.84
Non-PoE
Standby mode
1 minute
1G TP Port x 24
1G SFP x 4
10G SFP x 4
220
0.17
0.81
37.40 30.29
Non-PoE
Full
-loading
60 minutes later
1G TP Port x 24
1G SFP x 4
10G SFP x 4
220
0.18
0.89
39.60 35.24
Note: Apparent Power (VA) = AC Voltage x AC Current Consumption.
Real Power (W) = Apparent Power (VA) x Power Factor.
4. 240V AC Input
Status Operating Interface
AC Voltage
(V)
AC Current
Consumption
(A)
Power
Factor
Apparent
Power (VA)
Real Power
(W)
Non
-loading None
240
0.10
0.58
24.00 13.92
Non-PoE
Standby mode
1 minute
1G TP Port x 24
1G SFP x 4
10G SFP x 4
240
0.15
0.83
36.00 29.88
Non-PoE
Full
-loading
60 minutes later
1G TP Port x 24
1G SFP x 4
10G SFP x 4
240
0.17
0.87
40.80 35.50
Note: Apparent Power (VA) = AC Voltage x AC Current Consumption.
Real Power (W) = Apparent Power (VA) x Power Factor.

Lantronix SISPM1040-3xxx-L Install Guide
33762 Rev. G https://www.lantronix.com/ Page 15 of 48
AC and DC Power
AC 110V + DC 52V
Status Operating
Interface
DC Current
Consumption
(A)
DC
Voltage
(V)
DC Power
Consumption
(W)
Non-loading None 0.43 52 23.22
Standby mode
1G TP Port x 24
1G SFP x 4
10G SFP x 4
7.96 52 429.84
Full-loading
60 minutes later
1G TP Port x 24
1G SFP x 4
10G SFP x 4
8.05 52 434.70
Non-PoE
Standby mode
1G TP Port x 24
1G SFP x 4
10G SFP x 4
1.02 52 53.04
Non-PoE
Full-loading
60 minutes later
1G TP Port x 24
1G SFP x 4
10G SFP x 4
1.18 52 61.36
AC110 + DC 54V
Status Operating
Interface
DC Current
Consumption
(A)
DC
Voltage
(V)
DC Power
Consumption
(W)
Non-loading None 0.43 54 23.22
Standby mode
1G TP Port x 24
1G SFP x 4
10G SFP x 4
7.96 54 429.84
Full-loading
60 minutes later
1G TP Port x 24
1G SFP x 4
10G SFP x 4
8.05 54 434.70
Non-PoE
Standby mode
1G TP Port x 24
1G SFP x 4
10G SFP x 4
1 54 54.00
Non-PoE
Full-loading
60 minutes later
1G TP Port x 24
1G SFP x 4
10G SFP x 4
1.14 54 61.56

Lantronix SISPM1040-3xxx-L Install Guide
33762 Rev. G https://www.lantronix.com/ Page 16 of 48
AC 110V + DC 57V
Status Operating
Interface
DC Current
Consumption
(A)
DC
Voltage
(V)
DC Power
Consumption
(W)
Non-loading None 0.43 57 23.22
Standby mode
1G TP Port x 24
1G SFP x 4
10G SFP x 4
7.96 57 429.84
Full-loading
60 minutes later
1G TP Port x 24
1G SFP x 4
10G SFP x 4
8.05 57 434.70
Non-PoE
Standby mode
1G TP Port x 24
1G SFP x 4
10G SFP x 4
0.92 57 52.44
Non-PoE
Full-loading
60 minutes later
1G TP Port x 24
1G SFP x 4
10G SFP x 4
1.08 57 61.56

Lantronix SISPM1040-3xxx-L Install Guide
33762 Rev. G https://www.lantronix.com/ Page 17 of 48
Software Features
Layer 2 Switching
Spanning Tree
Protocol (STP)

Standard Spanning Tree 802.1d
Rapid Spanning Tree (RSTP) 802.1w

Multiple Spanning Tree (MSTP) 802.1s
Trunking
Link Aggregation Control Protocol (LACP) IEEE 802.3ad
VLAN
Supports up to 4K VLANs simultaneously (out of 4096 VLAN IDs)
Port-based VLAN
802.1Q tag-based VLAN
MAC-based VLAN
Management VLAN
Private VLAN Edge (PVE)
Q-in-Q (double tag) VLAN
Voice VLAN

GARP VLAN Registration Protocol (GVRP)
DHCP

DHCP Snooping used to block intruders on untrusted ports.
Relay of DHCP traffic to DHCP server in different VLAN.

Works with DHCP Option 82
IGMP v1/v2/v3
Snooping
IGMP limits bandwidth-intensive multicast traffic to only the requesters.
Supports 1024 multicast groups
IGMP Querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in
the absence of a multicast router
IGMP Proxy
IGMP snooping with proxy reporting or report suppression actively filters IGMP
packets in order to reduce load on the multicast router
MLD v1/v2 Snooping Delivers IPv6 multicast packets only to the required receivers
Layer 3 Switching
IPv4 Static routing IPv4 Unicast: Static routing
IPv6 Static routing IPv6 Unicast: Static routing
Security
Secure Shell (SSH)
SSH secures Telnet traffic in or out of the switch, SSH v1 and v2 are supported
Secure Sockets Layer
(SSL)
SSL encrypts http traffic, allowing advanced secure access to the browser-based
management GUI in the switch
IEEE 802.1X
I
EEE802.1X: RADIUS authentication, authorization and accounting, MD5 hash,
guest VLAN, single/multiple host mode and single/multiple sessions
Supports IGMP-RADIUS based 802.1X
Dynamic VLAN assignment
Layer 2 Isolation
Private VLAN Edge
PVE (also known as protected ports) provides L2 isolation between clients in the same
VLAN. Supports multiple uplinks

Lantronix SISPM1040-3xxx-L Install Guide
33762 Rev. G https://www.lantronix.com/ Page 18 of 48
Port Security Locks MAC addresses to ports, and limits the number of learned MAC addresses
IP Source Guard Prevents illegal IP address from accessing to specific port in the switch
RADIUS/ TACACS+ Supports RADIUS and TACACS+ authentication. Switch as a client
Storm Control
Prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast
storm on a port
DHCP Snooping A feature acts as a firewall between untrusted hosts and trusted DHCP servers
ACLs
Supports up to 256 entries. Drop or rate limitation based on:
Source and destination MAC, VLAN ID or IP address, protocol, port
Differentiated services code point (DSCP) / IP precedence
TCP/ UDP source and destination ports
802.1p priority
Ethernet type
Internet Control Message Protocol (ICMP) packets

TCP flag
Quality of Service (QoS)
Hardware Queue
Supports 8 hardware queues
Scheduling 
Strict priority and weighted round-robin (WRR)

Queue assignment based on DSCP and class of service
Classification

Port based
802.1p VLAN priority based
IPv4/IPv6 precedence / DSCP based
Differentiated Services (DiffServ)

Classification and re-marking ACLs
Rate Limiting

Ingress policer
Egress shaping and rate control

Per port
HQoS
Provides the ability to guarantee the quality of service for key users
Management
DHCP Server
Support DHCP server to assign IP addresses to DHCP clients
Remote Monitoring
(RMON)
Embedded RMON agent supports RMON groups 1,2,3,9 (history, statistics, alarms,
and events) for enhanced traffic management, monitoring and analysis
Port Mirroring
Traffic on a port can be mirrored to another port for analysis with a network analyzer
or RMON probe. Up to N-1 (where Nis the number of Switch Ports) ports can be
mirrored to single destination port. A single session is supported.
UPnP Universal Plug and Play enables device-to-device interoperability
s-Flow
The industry standard for monitoring high speed switched networks. It gives
complete visibility into the use of networks enabling performance optimization,
accounting/billing for usage, and defense against security threats

Lantronix SISPM1040-3xxx-L Install Guide
33762 Rev. G https://www.lantronix.com/ Page 19 of 48
IEEE 802.1ab (LLDP)

Used by network devices for advertising their identities, capabilities, and
neighbors on an IEEE 802ab local area network

Support LLDP-MED extensions
Web GUI Interface
Built-in switch configuration utility for browser-based device configuration
CLI
Configure/manage switches in command line interface modes
Dual Image
Independent primary and secondary images for backup while upgrading
SNMP
SNMP version1, 2c and 3 with support for traps, and SNMP version 3 user-based
security model (USM)
Firmware Upgrade Web browser upgrade HTTP/ HTTPs), TFTP, and CLI
NTP Network Time Protocol (NTP) for clock synchronization between computer systems
over packet-switched
Other Management

HTTP/HTTPs; SSH
DHCP Client/ DHCPv6 Client
Cable Diagnostics
Ping, Syslog
Telnet Client

IPv6 Management
Synchronization
IEEE 1588v2 PTP Support IEEE 1588 v2 PTP (Precision Time Protocol)
Loop Protection
ITU-T G.8031 Supports ITU-T G.8031 Ethernet Linear Protection (EPS)
ITU-T G.8032
Supports ITU-T G.8032 Ethernet Ring Protection Switching (ERPS)
Loop Detection
Supports Loop Detection and Protection
Rapid Ring (R-Ring)
Rapid Ring is a redundancy network protocol used to recover the network system
from critical links. Provides recovery time of less than 20ms on up to 250 switches.
MRP and MRP Rings
A recovery protocol based on ring topology, designed to react deterministically on a
single switch failure.
Carrier Ethernet
E-LINE
Ethernet Virtual Private Line: it is a service connecting two customer Ethernet ports
over a WAN.
E-LAN
Ethernet Virtual Private LAN: it is a multipoint service connecting a set of customer
endpoints, giving the appearance to the customer of a bridged Ethernet network
connecting the sites.
E-TREE
Ethernet Virtual Private Tree: it is a multipoint service connecting one or more roots
and a set of leaves but preventing inter-leaf communication.
E-ACCESS
An E-Access Service is an OVC-based service with at least one UNI OVC End Point and
one ENNI End Point.

Lantronix SISPM1040-3xxx-L Install Guide
33762 Rev. G https://www.lantronix.com/ Page 20 of 48
Carrier Ethernet
1588v2 PTP. OAM (IEEE802.3ah), CFM (IEEE802.1ag), PM (ITU-T Y.1731), ELPS (ITU-T
G.8031), ERPS (ITU-T G.8032), Y.1564
Ethernet OAM
IEEE 802.3ah Link
OAM Supports IEEE 802.3ah Ethernet OAM (Operations, Administration & Management)
IEEE 802.1ag & ITU-T
Y.1731 Flow OAM
Supports IEEE 802.1ag Ethernet CFM (Connectivity Fault Management)
Supports ITU-T Y.1731 PM (Performance Monitoring)
ITU-T Y.1564
Support RFC2544 Ethernet Service Activation Test Benchmarking Methodology:
Throughput, Latency, Frame loss rate, Back-to-back frames Test
Power over Ethernet (PoE)
Port Configuration
Supports per port PoE configuration function
PoE Scheduling
Supports per port PoE scheduling to turn on/off the PoE devices (PDs).
PoE Auto Checking
Auto Power Reset checks the link status of PDs. Reboot PDs if there are no responses.
Power Delay
The switch provides power to PDs based on delay time when PoE switch boots up, in
order to protect switch from misuse of the PDs.
Device Management System (DMS)
Graphical
Monitoring

Topology view: Intuitive way to configure and manage switches and devices
visually
Floor view: Easily drag and drop PoE devices to help you build a smart workforce
Map view: Effectively drag and drop devices and monitor operation on Google
Maps
Find my Switch
Search for and locate a specific switch quickly
Traffic Monitoring
Display visual chart of network traffic of all devices and monitor every port at any
time from switches
Troubleshooting

Network diagnostic between master switch and devices
Support protection mechanism, such as rate-limiting to protect your devices from
brute-force downloading
Support performance management and link management through IEEE 802.3ah
and IEEE 802.1ag (Y.1731)
Google Map API Key
Set up Google Map API Key from
https://developers.google.com/maps/documentation/directions/get-api-key to use
DMS Map View for enterprise applications