Laserco Charge Core WLC-ON20B-917 User manual

Charge Core 3-IN-1 Wireless Charging Stand
WLC-ON20B-917 & WLC-OM20W-924
User Manual

Thank you
for your purchase!
Laser Corporation is 100% Australian owned
& operated. To get the most out of your
product please read the user manual
carefully and keep for future use.
For specic information relating to your product
such as Spare Parts, FAQs, Warranty claims, and
more, please scan the following QR code:

WHAT’S IN THE BOX
• 3-IN-1 Wireless Charging Station
• 20W PD Charger
• Charging Cable
• User Manual

SPECIFICATIONS
Wireless Charging Standard: Qi
Input: 9V/2A, 12V/1.5A
Output (Phone Area): 15W (Max)
Output (Watch Area): 2W max
Output (Earbuds Area): 3W (Max)
Input Port: Type-C
Dimension: 127 x 117 x 71
Weight: 182.5g
Input: 100-240V, 50/60Hz,
0.5A
USB-C Output: 5V/3A, 9V/2.2A,
12V/1.67A
PD (Power Delivery): 20W
Weight: 41g
3-IN-1 WIRELESS CHARGING STATION
20W PD CHARGER

PRODUCT DIAGRAM
Watch charging area
Earphone and Non-Magsafe
compatible phone charging area
Indicator light
USB Type-C Port
Mobile phone charging
area (only Magsafe
compatible iPhones 12
and later

LED LIGHT INDICATOR
State LED Indicator
Power connected
Blue & Green light
turns on for 1 second
then turns o
Standby N/A
Mobile phone charging Blue light
Earphone charging Green light
Mobile phone & earphone
charging at the same time Blue & Green light
Watch charging N/A
Foreign object detected -
mobile phone Blue light ashing
Foreign object detected -
earphone Green light ashing
Foreign object detected -
mobile phone & earphone
Blue & Green light
ashing

TIPS FOR SAFE
CHARGING
1. AVOID OVERCHARGING.
Disconnect chargers and devices after the
battery reaches a full charge. Leaving
devices on a charger too long can cause
them to overheat and can reduce battery life.
2. PICK THE RIGHT CHARGER.
Only use the charger and cable that came
with your device. If using an alternative
charger, always follow the manufacturer’s
recommend charger requirements. Take
special care to match the correct voltage
and amp values your device requires when
picking a charger. Chargers are designed
for specic battery types; mixing chargers
and batteries could result in unexpected
problems.
3. CHARGE ONLY ON NON-FLAMMABLE
SURFACES.
Devices and chargers can get warm or

TIPS FOR SAFE
CHARGING
sometimes even hot during charging. Make
sure to always place the device and charger
on a non-ammable surface when charging.
Do not place on beds, pillows, paper, or
near any fabric such as curtains or clothing
under any circumstances.
4. AVOID EXTREME ENVIRONMENTS.
Do not recharge your devices in
environments where extreme temperatures
can occur. On particularly hot days do not
charge in places such as the inside of a car,
or an unairconditioned room. If it’s possible,
try and wait till the evening when
temperatures are a bit cooler.
5. MONITOR CHARGING.
Recharge your devices while you are nearby,
preferably in the same room or another room
close by. This way when there is a defective
battery or charger, you are able to take it o
the power supply immediately.
continued...

COMPATIBILITY LIST
Phone: iPhone 12 and later models with
Magsafe charging
Watch: Apple Watch Series 8, 7, 6, 5, 4, 3, 2,
SE (I & II)
Earbuds:
AirPods (2nd and 3rd Generation),
AirPods Pro, and other
Qi-enabled earbuds
iPhone 8 and later and other
Qi-enabled phones with wireless
charging

TROUBLESHOOTING
DEVICE NOT CHARGING:
• Power o/on your device and try charging again.
• Try another charging cable from the adapter to the
3-IN-1 Charger.
• Check you are only using the supplied Power Adapter
and Charging Cable.
• Check if your phone supports Qi Wireless Charging.
• Check if the 3-IN-1 Charger has a light then check the
LED Indicator Light function description in this manual.
SLOW CHARGING:
• Check there are no obstructions on the back of your
device such as credit cards or metal objects.
• Put the device on the centre of the charging surface.
• Phone cases cannot be thicker than 5mm.
• Check you are only using the supplied Power Adapter
and Charging Cable.

TROUBLESHOOTING
DEVICE OR CHARGER GETS VERY HOT
DURING CHARGING:
• It is normal for the charging coil to generate heat
during wireless charging. If you feel the charger is too
hot, then take the device o the charging surface and
wait till it has cooled down.
• Check you are only using the supplied Power Adapter
and Charging Cable.
• LED Indicator Light function description in this manual.
continued...

Visit our website
www.laserco.com.au
Check us out at
www.youtube.com/lasercoau