Laserworld GREEN-250A User manual

GREEN-250A
USER MANUAL
Please read this manual carefully before you initially start-up!

USER MANUAL: Laserworld GREEN-250A
Date: 01/2008
Page
2
of
4
DAN ER LASER RADIATION!
A oid direct eye exposure!
Laser radiation can cause eye damage and/or skin damage
All protecti e measures for a safe operation of this laser must be applied.
1. SAFETY INSTRUCTIONS
- If the de ice has been exposed to drastic temperature fluctuation, do not
switch it on immediately. The arising condensation water might damage your
de ice. Lea e the de ice switched off until it has reached room temperature.
- The laser must only be used for shows. The operation is only allowed if it is
controlled by a skilled and well-trained operator.
- Ne er lea e this de ice running unattended and keep it away from children
and unauthorized persons.
- Keep away from heaters and other heating sources. In order to safeguard
sufficient entilation, lea e 50 cm of free space around the de ice.
- Ne er direct the laser beam to people or animals.
- CAUTION LASER DIODE: Ne er unscrew the housing!
There are no ser iceable parts inside the de ice. Maintenance and ser ice
operations shall only be carried out by authorized dealers.
- Always disconnect from the mains when the de ice is not in use or before
cleaning it.
- HEALTH HAZARD! Never look directly into the light source, as
sensitive persons may suffer an epileptic shock!

USER MANUAL: Laserworld GREEN-250A
Date: 01/2008
Page
3
of
4
reen diode pumped solid state lasers:
REEN-250A
Low cost solid state 532 green laser - used in collimation, laser medical
treatment, scientific experimentation, optics instrument, laser display, and
lighting etc.
Technical Specifications:
• low cost laser diode with analogue modulated PSU
• GREEN: guaranteed: 220mW/532nm; typical: 250mW/532nm
• Wavelength (nm): 532
• Operating mode: CW
• Warm-up time (minutes): <1min
• Power stability: <10%
• Beam divergence, full angle (mrad): <1.5
• Beam diameter at the aperture (mm): 1,5
• Operating temperature: 10-35°C
• Expected lifetime (hours): 5000
• Net weight of laser head (kg): 0.2
• Dimensions of laser head (mm): 46mm * 46mm * 100mm
• Power Supply: 220V 50/60 Hz
• TTL modulation: 5V

USER MANUAL: Laserworld GREEN-250A
Date: 01/2008
Page
4
of
4
EU- Declaration of Conformity
We hereby confirm that the following de ice
Laserworld REEN-250A
complies with the essential safety requirements, laid down in the regulations of the
committee to assimilate the pro isions of law of all participating EU states on the
electromagnetic compatibility (98/336/EWG).
The de ice has been classified considering the following EU-norms on
electromagnetic compatibility:
DIN EN 55103-1: 1996
DIN EN 55103-2: 1996
DIN EN 61000-3-2:2000 + A2: 2005
DIN EN 61000-3-3:1995 + A1: 2001
Assessment of compliance of the product with the requirements relating to the Low Voltage
Directi e (LVD) was based on the following standards:
DIN EN 60065 : 2002
This declaration is executed on behalf of the GREEN-250A Importer:
Laserworld (Switzerland) A
Oberstrasse 1
8274 Tägerwilen
SWITZERLAND
Authorized person:
Super isory board Ms Rhea Gössel
place of business: 8274 Tägerwilen / SWITZERLAND
company number: CH-440.3.020.548-6
Commercial Registry Kanton Thurgau
www.laserworld.com
[e-mail]
representati e according to EMVG:
Cleantech Europe GmbH
Managing Director: Thomas Schulze
Fürkhofstr. 5
81927 München / DE