LAVAZZA CLASSY PRO User manual

INSTALLATION AND FIRST USE
1Make sure cable is plugged in
underneath machine and plug
into appropriate outlet.
2Rinse the water tank and place
into the back of the machine.
Fill it up to the maximum level
with clean water.
Connect the milk pipe
to the machine.
3
4Press the ON/OFF button to turn
on the machine. Select the display
language, the water hardness and
the stand-by time. Press the button
to fill the hydraulic circuit.
5The button’s lights will blink during
the machine warm up. Machine
is ready once lights stop blinking.
Place an empty mug under the
machine.
CLASSY
PRO
QUICK START GUIDE
6Press and brew COFFEE OZ
twice without capsule prior to use
to start the rinsing procedure.
SEE OTHER SIDE TO COMPLETE THE INSTALLATION

CLASSY
PRO
INSTALLATION AND FIRST USE
QUICK START GUIDE
10 Place the machine on its base and
fill the water tank with fresh water. 11 Plug in and place the milk refrigerator to the side of the machine. 12 Insert the milk tube into the milk container placed in the refrigerator.
Machine is ready to brew your
beverage.
Press System Clean button
and follow steps shown on
machine display.
Place the milk tube in a container
containing cleaning solution (water
+ milk cleaner, 8 Oz. min.). Place an
empty glass under the spouts (14 Oz.
min.). Press OK to confirm and start
the cleaning procedure.
Place the milk tube in a container
containing fresh water (Oz. min.)
to rinse the system and complete
the procedure.
7 8 9