LCG DICE6 User manual

DICE6 (LCG-1207)-User Manual
USER MANUAL
DICE6
LCG-1207
(7x 12W-RGBAWV 6-in-1)
1

DICE6 (LCG-1207)-User Manual
 Index



Summarization..................................................................................................... 1
Safety instruction ................................................................................................... 1
Outside size picture............................................................................................... 2
Main function.......................................................................................................... 3
DMX control function ............................................................................................. 3
Display operation instruction................................................................................. 6
Menu instruction .................................................................................................... 6
Operating control instruction................................................................................. 9
XLR connection instruction ................................................................................... 9
Cable connecting Draft........................................................................................ 10
Trouble shooting.................................................................................................. 11
Technical specification ........................................................................................ 13

Please read over this manual before operating the light
2

DICE6 (LCG-1207)-User Manual
1. Summarization
Summarization
Thank you for purchasing our DICE6lighting. Please read these instructions carefully
before begin and operate the fixtures according to these instructions to avoid any
possible damages and accidents causes by misusage.
Products introduction
This product has a light body and fashion design . It uses high power 6-in-1 LED,
which means each LED is made of R,G,B,A,W ， UV LED chips. Long life span, low
power consumption, good
color mixing effect and high brightness are the most prominent
features. Each kind of LED can be independently dimmed. The built-in program includes
dimming, strobe, gradual change, fading and so on.
It uses power switch, performs low
weight and consumption, stable capability and long life. International standard DMX 512
signal is requested.
 Packing list
DICE61PC
DMX signal cable 1PC
Power-in cable 1PC
Power-on connector 1PC
The User Manual
2. Safety Instruction
Safety Notes
! Enquire the skilled people before any repair;
! Always make sure disconnect from the power source before setting up, serving and moving;.
! Avoid direct eye exposure to the fixture when it is on;
3

DICE6 (LCG-1207)-User Manual
Safety instruction
●Make sure the power supply voltage are consistent with this lights，Ensure the use of
voltage is in the range of the request technical parameter.
●Before the installation, please check the light’s fasteners and mechanical structure
have been received in good condition and appear no damage.
● This light is designed for indoor use; working temperature is lower than 50 degree.
●The fixtures maybe mounted in any position provided there is adequate room for
ventilation. Make sure there are no inflammable and explosive items (ornaments) in 0.5
meters away.
●Yellow / green cabling earthling safety; no flicker when the fixture is working on.
3. outside Size Picture
4

DICE6 (LCG-1207)-User Manual
4. Main Function
 high quality LED: low consumption, High brightness, stable capability and long life
each color of LED with 32-bit, 16666 grades dimming. Over 400Hz dimming frequency,
take pictures without flicker
RGBWUV color mixing
dim 0%-100%, Strobe、gradual change、jumping change and etc
DMX512 Controller，4 button set DMX ID address with led display
auto run /sound activated/master slave/interconnected multi-machine control
using switching power supply to protect the LED to work well
lens degree: 25º
DMX control channel optional
5. DMX Control Function
DMX Channel（3CH）
Channel DMX Value Control Function Remarks
1CH 0-255 RGB color mixing Hue
2CH 0-255 W Dimming 0-100% Color Saturation
3CH 0-255 General dimming
0-100%
purity
DMX Channel（6CH）
Channel DMX Value Control Function Remarks
1CH 0-255 R 0-100%
2CH 0-255 G 0-100%
3CH 0-255 B 0-100%
4CH 0-255 A 0-100%
5CH 0-255 W 0-100%
6CH 0-255 UV 0-100%
5

DICE6 (LCG-1207)-User Manual
DMX Channel（8CH）
ChannelDMX ValueControl FunctionRemarksPriority
1CH 0-255
General dimming 0——
100%
2CH 0-255
R dimming 0——100%
3CH 0-255
G dimming 0——100%
4CH 0-255
B dimming 0——100%
5CH 0-255
A dimming 0——100%
6CH 0-255
W dimming 0——100%
7CH 0-255 UV dimming 0——
100%
1
0-14 dimming
8CH 15-255 Strobe speed
2
DMX channel（10CH）
ChannelDMX ValueControl FunctionRemarksPriority
1CH 0-255
General dimming 0—
—100%
2CH 0-255 R dimming 0——
100%
3CH 0-255 G dimming 0——
100%
4CH 0-255 B dimming 0——
100%
1
6

DICE6 (LCG-1207)-User Manual
5CH 0-255 A dimming 0——
100%
6CH 0-255 W dimming 0——
100%
7CH 0-255 UV dimming 0——
100%
0-14 dimming
8CH 15-255 Strobe speed
2
0-31 Invalid
32-63 From dark to bright
64-95 From bright to dark
96-127 dark—bright—dark
auto run
128-164 Gradual change
165-191 dark—bright—dark
auto run
192-223 Color jumping
32-127, Must use
CH1,2,3,4,5,6CH,
otherwise no
light. From the
10CH, start the
speed
adjustment.
9CH
224-255 Sound control
3
10CH 0-255 Speed Adjustment,
slow-fast
3
DMX channel（11CH）
ChanneDMX ValueControl FunctionRemarksPriority
1CH 0-255
General dimming 0—
—100%
2CH 0-255 R dimming 0 ——
100%
3CH 0-255 G dimming 0——
100%
4CH 0-255 B dimming 0——
100%
1
7

DICE6 (LCG-1207)-User Manual
5CH 0-255 A dimming 0——
100%
6CH 0-255 W dimming 0——
100%
7CH 0-255 UV dimming 0——
100%
0-14 dimming
8CH 15-255 Strobe speed
2
0-31 Invalid
32-63 From dark to bright
64-95 From bright to dark
96-127 From
dark—bright—dark
128-164 Gradual change
165-191 dark—bright—dark
auto run
192-223 Colors jumping
32-127, Must use
CH1,2,3,4,5,6CH,
otherwise no
light. From the
10CH, start the
speed
adjustment.
9CH
224-255 Sound control Invalid for
outdoor light
3
10CH 0-255 Speed Adjustment,
slow-fast
3
11CH
0-5
6-55
56-105
106-155
156-205
206-255
Set by LED display
DIMMER0-4
DIMMER0
DIMMER1
DIMMER2
DIMMER3
DIMMER4
8

DICE6 (LCG-1207)-User Manual
6. Display Operation
MENU : access the menu or return to a previous menu option
ENTER: select the current menu option
UP: menu selection or parameter increments
DOWN: menu selection or parameters decrease
9

DICE6 (LCG-1207)-User Manual
7. Menu Instruction
  
Addr d001-d512 DMX Mode

 
  
 
Slave receiving
mode
SLAU SL.AU 


CHnd DMX Channel mode
3CH\6CH\8CH\10CH\11CH
 

 
Changing built-in
program speed
SP-- SP00-SP15 


Built-in program
Pr-- Pr00-Pr35
 

 

Color Jumping
ASC- AC00-AC15 
  
MENU

FAdE FA00-FA15 Gradual Changing
mode 
  

White strobe mode
FLAS FL00-FL15 
  

r.000-r.255 R Dimming
rL-- 
  

G Dimming
GL-- G.000-G.255 
  

B Dimming
bL-- b.000-b.255 



I.000-I.255IL-- A Dimming

10

DICE6 (LCG-1207)-User Manual



W Dimming


UL-- U.000-U.255 UV dimming 
  

SouA So.uA Sound Activated 
  

LED on/Off Display on/off 
  

nodEnod0‐nod4DMX dimmer mode

 
UErn
UE2.0The edit No. of the
software
1. Operating instruction:
MENU（UP/DOWN）+ENTER+UP/DOWN）+ENTER
Remark: Exp: Select the DMX mode, Here are the operation details:
Press the MENU, go back to the initial setting
Press UP/DOWN, display “Addr”
Press ENTER to change the content, the display will flash at this moment
Press UP/DOWN to change the address code to select d001
Press ENTER to select and store the current menu options. DMX mode will be
stored automatically and the screen will stop flashing.
Exp：Select DMX Channels optional mode, the operation is as below:
AL--
A.000-A.255
11

DICE6 (LCG-1207)-User Manual
Press MENU，go back to the initial setting
Press UP/DOWN，display ”CHnd”
Press ENTER to change the content, the display will glinting at this moment
Press UP/DOWN to select the DMX channels that you need,
3CH,6CH,8CH,10CH,11CH and so on
Press ENTER and keep on 10 seconds,will appear”A001”. DMX mode will be
stored automatically and the screen will stop glinting.
Exp：turn off the display, the operation is as below:
Press MENU，go back to the initial setting
Press UP/DOWN，display “LED”
Press ENTER to change the content, the display will flash at this moment
Press UP/DOWN to select “OFF”
Press ENTER to confirm, then select the working mode that you need. When stop
pressing, the display will turn off after a while. When the display is off, press any
button to activate the display. If setting the led to “off”, when stop pressing, the
display will turn off after a while.
2.Details of program built inside（Pr- -）
Press MENU, go back to the initial setting
Press UP / DOWN until Pr--
Press ENTER to choose, the display will flash at this moment
Press UP / DOWN to change the address code to select pr00
 Press ENTER to select and store the current menu options. DMX mode will be
stored automatically and the screen will stop flashing.
Remark: Pr63--- Pr66 Can change the content Of SP, the speed of jumping can be
changed , SP00 is the fastest，SP15 is the slowest
Pr00-Pr62：R,G,B.A,W,UV single color or multi-colors lighting
12

DICE6 (LCG-1207)-User Manual
Pr63：6 colors jumping.
Pr64: 6 colors jumping + strobe
Pr65: multiple colors jumping
Pr66：multiple colors jumping + strobe
8. Operating Control Instruction
Master/Slave
Master setting：The master should be one of following modes: built-in modes, color
jumping Mode, fade mode, white strobe mode and manual dimming mode. It sends out
synchronizing signal. To avoid the master signal and DMX512 signal from interfering with
each other, we should cut off the DMX512 signal. When the signal cables are longer than 60
meters (32 sets) , a DMX signal amplifier is necessary.
Slave setting：It must be in the SLAV mode to assure receiving the master’s signals
correctly. Only one light can be set as a Master and others are slaves.
 9. XLR cable connecting
XLR cable：
The standard way of connecting the XLR is: one end connects to the male plug, and the
other end connects to the female. As bellow: pin 1: ground, pin 2: negative signal, pin 3:
positive signal
13

DICE6 (LCG-1207)-User Manual
Noted：In order to avoid failures and interference signal transmission，we connect a
resistance120Ω（1/4W）at the end of the DMX connecting as below:
The Conversion between 3 pin and 5 pin XLR
If the output cable of DMX512 controller is the 5PIN, please use 1pc 5PIN to 3PIN cable
10. Cable connecting Draft
14

DICE6 (LCG-1207)-User Manual
11. Trouble Shooting
Problem Checking Way
Can not turn on the
light
Check the power source plug is in normal or not
Check the switch of the lights is off or on
Check the fuse if in normal
DMX can not control
it
Check the DMX cable is connect to the lights or not
Check the DMX512 controller work in normal or not
Check the DMX cable is normal or not
Check if the lights is in DMX mode（A001）
Display not bright
When connect to the electricity，did the led flash one time? If so，
the power source is normal; If not，please check if the switch and
the transformer has power out
Check if the power input of the IC board is normal
Check if the cable connect to the display loose
Change the main board to see if it is normal.
Chang the display
LED not light
When connect to the electricity，did the led flash one time? If so，
the power source is normal; If not，please check if the switch and
the transformer has power out
Check if the power input of the IC board is normal
Check if the cable connect to the display loose
Change the main board to see if it is normal.
Chang the display
LED is connected by leds in series first, then connect parallel, so
15

DICE6 (LCG-1207)-User Manual
Some of the LED not
light
please check if the leds is loose
Use the multimeter to check if the led is bright or not, of not,
please change the led
check whether current limiting resistor is normal or not
Check constant current IC is normal or not (compared with the
normal IC)
Single color leds
always bright/not
bright
Check the switch of this color is normal or not
Change the IC control board
Noted：only professional persons can do as above！
16

DICE6 (LCG-1207)-User Manual
17
12. Technical Specification
● Input voltage：AC 100V-264V/47-63HZ
● Output voltage：DC24V
● Consume：84W
● Lamp Type：LED(12W)
● Lamp Spec：6-in-1 LED（7PCS）
● Life span: 50000hours
● Constant current driver：400mA
● PWM Dimmer：》400HZ（16666 steps）
● Control Signal：DMX512, sound activated, auto run
● Control mode：stand alone/ sound activated/Master and slave
● Channel：3CH、6CH、8CH、10CH、11CH
● Color effect：RGBAWUV mixing
● Function Effect:dimmer, strobe, gradual change, sound activated
● Cooling mode: fan
● Beam Angle:25°
● Anti-electricity intension：1.5KV
● Insulation Resistance:＞２MΩ
● Size：193*123*179mm
● N.W：2 Kg