Leader Light LL HBDW PS21-NA-I20 Series User manual

©MMXII - LEADER LIGHT – All right reserved Edition: A - 2012 Additional information on [email protected]
LEADER LIGHT s.r.o.
M.Gorkeho 33
052 01 Spisska Nova Ves
Slovakia
www.leaderlight.eu
USER MANUAL
01 SAFETY INFORMATION
WARNING!!!
Carefully read before installing, powering or servicing. Nothing to do if
anything misunderstand! Installation can be done only by a quali ed
professional in accordance with relevant local codes.
01.1 Risk of eyes damage
Do not look directly into LED lamps.
Do not look into light beam from a distance of less than 40 cm (16 inches)!
-
-
01.2 Safety instructions
Shut down power before installation or maintenance.
Do not modify, alter, or attempt to service the LEADER LIGHT appliance. Doing
so will void the warranty.
Appliance and recommended AC power supply must be installed by a quali ed
professional in accordance with relevant local codes. Use only acceptable source
of AC power and frequency that complies with local biulding and electrical codes.
Use only the recommended voltage source.
Appliance always connect to earth (eltech.)!
Do not use or do not connect the products if the power cable, power plug or
 xtures are any way damaged, wet, or if they are overheating.
Before removing or installing any cover or part of appliance disconnect it from AC
power.
AC power supply must be protected against overvoltage and short circuits.
-
-
-
-
-
-
-
-
01.3 Fire protection
Follow all safety restrictions.
Thermostatic switches or fuses never to bypass.
Device and ventilating slots never shield. Around the axis of the  tting (180°)
must be maintained space for cooling. Minimum distance from the surrounding
objects must be 100mm (4 in.).
LEDs never direct cover with  lters or other materials.
Allowing max. ambient temperature is 40°C (104°F).
Luminaries never use without mounting brackets. The housing never install directly
to the surface.
-
-
-
-
-
-
02 PRODUCT SPECIFICATION
02.1 Technical specifi cation
Power connection: 90-264V AC 47-63Hz In PowerCon connector
LED lifetime: 75.000 hours (70% lumen maintenance at T
a=25°C)
IP: Indoor IP20
Ambient temp. (Ta): max. +40ºC
Cooling Conventional
Installation: Surface / suspended mounting with adjustable bracket
LL HBDW PS21-NA-I20 ...
COMPLIMENTS ON YOUR PURCHASE!
Dimensions
Package includes:
LL HBDW PS21-NA-I20 with adjustable bracket- 1pc.
User manual- 1pc.
Additional items needed:
Mounting accessories as necessary-
Content:
01 SAFETY INFORMATION
01.1 Risk of eyes damage
01.2 Safety instructions
01.3 Fire protection
02 PRODUCT SPECIFICATION
02.1 Technical speci cation
02.2 Product description
03 INSTALLATION
03.1 Unpacking
03.2 Physical installation
03.3 Connection
04 MAINTENANCE AND SERVICE
02.2 Product description
03 INSTALLATION
03.1 Unpacking
Unpack carefully.
This is electronic equipment and should be handled carefully.
Damaged delivered package or if are any mechanical parts broken – it must be
claim immediately by the transport company. Photo pictures as evidence are
valuable for future claim.
-
-
-
03.2 Physical installation
Loading capacity of bearing area has to be at least 10 times the weight of all
device clusters.
Hairbreadth from combustible materials is 0,5m.
-
-
03.3 Connection
Respect all SAFETY INFORMATION 01!
Connect the ground (earth) !
It is not necessary to open the  xture before power supply ! Power supply is
solved simple with PowerCon connector.
The  xture is equipped with auto-switching power supply that automatically
adjusts to any 47-63Hz AC power source from 90-264V.
Cord plug connections:
-
-
-
-
-
Symbol Pin Wire Colour Screw (US)
Llive brown yellow or brass
Nneutral blue silver
ground (earth) yellow/green green
!
Non-minimum distance and / or non-use the original brackets is at your own risk!
Page 1 /2
ENVIRONMENTAL PROTECTION
Do not throw away the appliance with the normal household waste at the end of its
life, but hand it in at an of cial collection point for recycling. By doing this, you help to
preserve the environment.
!Power In with
PowerCon
90-264V AC 47-63Hz In
PowerCon
290 mm
11.4“
210 mm
8.3“
350 mm
13.8“

©MMXII - LEADER LIGHT – All right reserved Edition: A - 2012 Additional information on [email protected]
Page 2 /2
04 MAINTENANCE AND SERVICE
Before any maintenance is necessary to carefully read all SAFETY INFORMATION 01!
Damages caused by inadequate cleaning or maintenance are not covered by warranty.
Requires periodic cleaning (dust, dirt ,...)
Procedure for maintenance:
Unplug mains before maintenance and at least 10 minutes cool off.
Appliance do not illegal open or demount. Clean-up dust only from outer surface.
Use vacuum or dumpy duster (warm water)
Before reinstalling make sure everything is intact and dry– no wet parts!
Service:
Customer service provided by the manufacturer.
-
-
-
-
-
-
-
90V
~
264V
IP20
90°
1. Mechanical mounting of LL HBDW PS21-NA-I20
1 2
Make the power connection. 3
WARNING!!!
Installation can be done only by a qualied professional in accordance
with relevant local codes.
Ø 13mm
LL HIGH BAY DOWNLIGHT Weight
LL HBDW PS21-NA-I20-16-60W-056-45K-C80 4,10 kg 9lbs
LL HBDW PS21-NA-I20-24-75W-056-45K-C80 4,10 kg 9lbs
LL HBDW PS21-NA-I20-25-75W-056-45K-C80 4,10 kg 9lbs
LL HBDW PS21-NA-I20-36-100W-056-45K-C80 4,40 kg 9,7lbs
BASIC RANGE
!