Leader Light LL SPORT 4K User manual

©MMXVI - LEADER LIGHT – All right reserved Edition: A - 2016 Additional information on [email protected]
LEADER LIGHT s.r.o.
M.Gorkeho 33
052 01 Spisska Nova Ves
Slovakia
www.leaderlight.eu
USER MANUAL
Symbol Pin Wire Colour Screw (US)
Llive brown yellow or brass
Nneutral blue silver
ground (earth) yellow/green green
!
!
Non-minimum distance and / or non-use the original brackets is at your own risk!
Luminaire must be connect to Driver! Never connect direct to main power!
Page 1 /2
ENVIRONMENTAL PROTECTION
Do not throw away the appliance with the normal household waste at the end of its
life, but hand it in at an o󰀩cial collection point for recycling. By doing this, you help to
preserve the environment.
01 SAFETY INFORMATION
WARNING!!!
Carefully read before installing, powering or servicing. Nothing to do if
anything misunderstand! Installation can be done only by a qualied
professional in accordance with relevant local codes.
01.1 Risk of eyes damage
-Do not look directly into LED lamps.
-Do not look into light beam from a distance of less than 40 cm (16 inches)!
01.2 Safety instructions
- Shut down power before installation or maintenance.
- Do not modify, alter, or attempt to service the LEADER LIGHT appliance. Doing
so will void the warranty.
- Appliance and recommended AC power supply must be installed by a qualied
professional in accordance with relevant local codes. Use only acceptable source
of AC power and frequency that complies with local biulding and electrical codes.
- Use only the recommended voltage source.
- Appliance always connect to earth (eltech.)!
- Do not use or do not connect the products if the power cable, power plug or
xtures are any way damaged, wet, or if they are overheating.
- Before removing or installing any cover or part of appliance disconnect it from AC
power.
- AC power supply must be protected against overvoltage and short circuits.
01.3 Fire protection
- Follow all safety restrictions.
- Thermostatic switches or fuses never to bypass.
- Device and ventilating slots never shield. Around the axis of the tting (180°)
must be maintained space for cooling. Minimum distance from the surrounding
objects must be 100mm (4 in.).
- LEDs never direct cover with lters or other materials.
- Allowing max. ambient temperature is 40°C (104°F).
- Luminaries never use without mounting brackets. The housing never install directly
to the surface.
02 PRODUCT SPECIFICATION
02.1 Technical specication
LL SPORT 4K luminaire
Power connection:
use only with LL SPORT DRIVER, Input withe XLR 4 pin
IP: IP20 or IP 67 on request
Ambient temp. (Ta): Standard: -30 ºC < Ta < +40 ºC; Optional: +55 °C
Net weight: 250 W: 6,5 kg, 500 W: 13 kg, 750 W: 20 kg withou Driver
Installation: on surface/pendante with bracket
LL SPORT DRIVER DMX:
Power connection:
AC 90 – 305 V, 47– 63 Hz;
setup time 15 ms,max. Inrush current 75 A / 240 V AC
IP:
Control:
IP20
DMX
Ambient temp. (Ta): Standard: -30 ºC < Ta < +40 ºC; Optional: +55 °C
Net weight: 250 W: 2,1 kg, 500 W: 3,6 kg, 750 W: 5,2 kg withou bracket
Installation: on surface or luminaire
!
LL SPORT 4K ... with DMX DRIVER
COMPLIMENTS ON YOUR PURCHASE!
Package includes:
- LL SPORT 4K with adjustable bracket 1pc.
- User manual 1pc.
Additional items needed:
- Data and power cables
- LL SPORT DRIVER DMX
- Mounting accessories as necessary
- DMX controler
Content:
01 SAFETY INFORMATION
01.1 Risk of eyes damage
01.2 Safety instructions
01.3 Fire protection
02 PRODUCT SPECIFICATION
02.1 Technical specication
02.2 Product description
03 INSTALLATION
03.1 Unpacking
03.2 Physical installation
03.3 Connection
03.4 Control data connection
04 MAINTENANCE AND SERVICE
02.2 Product description LL SPORT DRIVER
03 INSTALLATION
03.1 Unpacking
- Unpack carefully.
- This is electronic equipment and should be handled carefully.
- Damaged delivered package or if are any mechanical parts broken – it must be
claim immediately by the transport company. Photo pictures as evidence are
valuable for future claim.
03.2 Physical installation
- Loading capacity of bearing area has to be at least 10 times the weight of all
device clusters.
- Hairbreadth from combustible materials is 0,5m.
03.3 Connection
- Respect all SAFETY INFORMATION 01!
- Connect the ground (earth) !
- Connect the luminaire with Neutrik Speokon 4 pin to Driver lum. input.
It is not necessary to open the Driver box before power supply
- The xture is equipped with auto-switching power supply that automatically
adjusts to any 47-63Hz AC power source from 90-305V.
- Cord plug connections:
DRIVER 500W
DRIVER 250W
DRIVER 750W
AC 90 – 305 V,
47– 63 Hz
cable input 1,5
m long
250 W / 500W / 750 W:
1x / 2x / 3x
cable 1,5 m long with NL4F
input to Driver
DMX In
Neutrik
NC5F
DMX In
Neutrik
NC5F
DMX In
Neutrik
NC5F
DMX Out
Neutrik
NC5M
DMX Out
Neutrik
NC5M
DMX Out
Neutrik
NC5M
2 x Output to 250W luminaire
Neutrik Speakon 4 pin
NL4M
1 x Output to 250W luminaire
Neutrik Speakon 4 pin
NL4M
3 x Output to 250W luminaire
Neutrik Speakon 4 pin
NL4M
AC 90 – 305 V,
47– 63 Hz
cable input 1,5
m long
AC 90 – 305 V,
47– 63 Hz
cable input 1,5
m long
600 mm 275 mm
255 mm
600 mm 355 mm
496 mm
600 mm
735 mm
405 mm
LL SPORT 4K Luminaire

©MMXVI - LEADER LIGHT – All right reserved Edition: A - 2016 Additional information on [email protected]
04 MAINTENANCE AND SERVICE
- Before any maintenance is necessary to carefully read all SAFETY INFORMATION 01!
- Damages caused by inadequate cleaning or maintenance are not covered by warranty.
- Requires periodic cleaning (dust, dirt ,...)
Procedure for maintenance:
- Unplug mains before maintenance and at least 10 minutes cool o󰀨.
- Appliance do not illegal open or demount.
- Clean-up dust only from outer surface. Use vacuum or dumpy duster (warm water)
- Before reinstalling make sure everything is intact and dry– no wet parts!
Service:
- Customer service provided by the manufacturer.
!
4. Block diagram - LL SPORT 4K luminaire connection with LL SPORT DRIVER
3. DRIVER xation on surface
The DRIVER could be mount on surface or direct on luminaire (select the type of mounting bracket
depending on the type of attachment)
2. Mechanical mounting of LL SPORT 4K
AIMING POSSIBILITY
The whole xture could be aim
to wish position with adjustable
bracket.
Mounting on surface:
Fix surface mounting
Adjustable surface mounting Turn bracket with luminaire in the desired direction
and tighten the screws
2.1 Screw the xture to the surface (1xM10 + 2xM8) +/-45 °
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
1
A2
4K zostava 250W ceiling mouting
Stav Změny Datum Jméno
Nakreslen
Zkontrolován
Norma
Datum Jméno
27.11.2015 julo
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
1
A2
4K zostava 250W ceiling mouting
Stav Změny Datum Jméno
Nakreslen
Zkontrolován
Norma
Datum Jméno
27.11.2015 julo
Construction mounting 0 °
Celling mounting 0 ° Celling mounting 75 °
Construction mounting 75 °
LL SPORT DRIVER LL SPORT DRIVER mount direct
on luminaire
LL SPORT DRIVER BRACKET
SURFACE
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
1
A2
4K zostava 250W ceiling mouting
Stav Změny Datum Jméno
Nakreslen
Zkontrolován
Norma
Datum Jméno
27.11.2015 julo
LL SPORT
DRIVER
750W
DMX DMX DMX DMX
3 x LL SPORT 4K L660-120-250W 1 x LL SPORT 4K L1260-240-500W 1 x LL SPORT 4K L1860-360-750W
AC 90 – 305 V,
47– 63 Hz
AC 90 – 305 V,
47– 63 Hz
AC 90 – 305 V,
47– 63 Hz
LL SPORT DRIVER Number of luminaires
LL SPORT 4K L660-120-250W LL SPORT 4K L1260-240-500W LL SPORT 4K L1860-360-750W
250 W 1 - -
500 W 2 1 -
750 W 3 1 1
03.4 Control data connection
- contact LEADER LIGHT
DMX Address
set-up
under cover
DMX Address
set-up
under cover
DMX Address
set-up
under cover LL SPORT
DRIVER
500W
LL SPORT
DRIVER
750W
DMX Address
set-up
under cover