LeapFrog Speak & Learn Puppy Assembly Instructions

91-003831-001 UK
Parent’s Guide
This guide contains important information. Please keep it for future reference.
Speak
SpeakSpeakSpeak Learn
LearnLearnLearn
&
&&&
Puppy
PuppyPuppyPuppy

2
INTRODUCTION
Thank you for purchasing the Speak & Learn Puppy !
Build language and listening skills with Bailey, the puppy who says what
you say. Play activities and listen to songs with this interactive talking
and singing puppy.
Power Button
Off/Low/High
Volume Selector
Learning Level
Selector
Talk Button
Babble Button
Star Button
Music Button

3
INCLUDED IN THIS PACKAGE
• Speak & Learn Puppy
• Parent’s guide
WARNING
All packing materials, such as tape, plastic sheets, packaging
locks, removable tags, cable ties and packaging screws are not
part of this toy, and should be discarded for your child’s safety.
NOTE
Please keep this parent’s guide as it contains important
information.

4
GETTING STARTED
BATTERY REMOVAL AND INSTALLATION
1. Make sure the unit is turned Off.
2. Find the battery cover located on the bottom of the unit
and use a screwdriver to loosen the screw and open the
battery cover.
3. Remove old batteries by pulling up on one end of each battery.
4. Install 4 new AA (AM-3/LR6) batteries into the battery
compartment as illustrated.
5. Replace the battery cover and tighten the screw to secure.

5
BATTERY NOTICE
• Alkaline batteries are recommended.
• Use only batteries of the same or equivalent type as
recommended.
• Do not mix different types of batteries: alkaline, standard
(carbon-zinc) or rechargeable, or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging
(if removable).
• Rechargeable batteries are only to be charged under adult
supervision.
Disposal of Batteries and Product
The crossed-out wheelie bin symbols on products and
batteries, or on their respective packaging, indicates
they must not be disposed of in domestic waste as
they contain substances that can be damaging to the
environment and human health.
The chemical symbols Hg, Cd or Pb, where marked,
indicate that the battery contains more than the
specified value of mercury (Hg), cadmium (Cd) or
lead (Pb) set out in Battery Directive (2006/66/EC).
The solid bar indicates that the product was placed
on the market after 13th August, 2005.
Help protect the environment by disposing of your
product or batteries responsibly.
For more information, please visit:
www.recycle-more.co.uk
www.recyclenow.com

6
Note: This product is in Try-Me mode in the packaging. After
opening the package, slide the Control Switch to the Off
position, then slide the Control Switch to the On position. If
the unit powers down while playing, please install a new set
of batteries.
PRODUCT FEATURES
1. Off/Low/High Volume Selector
Slide the Off/Low/High Volume Selector
to Low [ ] or High [ ] to turn the toy
on and select the volume.
2. Learning Level Selector
Slide the Learning Level Selector to level
1, 2 or 3 to select the learning level to use
with the Talk Button. Bailey interacts with
your child by repeating what is said, asking
questions and using your child’s responses
to build a short story.
• Level 1: Bailey repeats simple words and sounds.
• Level 2: Bailey speaks full sentences and asks questions.
• Level 3: Bailey helps create short stories.
3. Power Button
Press to wake up the toy or put the toy in
sleep mode.

7
4. Talk Button
Press the Talk Button to answer questions
and create fun stories. The Learning Level
Selector changes the interactions.
5. Music Button
Press to hear three fun learning songs.
6. Star Button
Press the Star Button to learn letter sounds
and numbers one to five.
7. Babble Button
Press to initiate the babble feature to talk
back and forth with the toy. Explore all
the ways Bailey talks and responds by
repeatedly pushing the Babble Button
and playing along.
8. Ears & Head
The toy’s ears move up and down and
the head moves from side to side when
Bailey talks.

8
9. Automatic Shut-Off
To preserve battery life, the Speak & Learn Puppy will
automatically enter sleep mode after approximately 45
seconds without input. The unit can be turned on again by
pressing any button.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions,
please follow these steps:
1. Turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit On. The unit should now be ready to use again.
5. If the unit still does not work, install a new set of batteries.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from direct
heat sources.
3. Remove the batteries if the unit will not be in use for an
extended period of time.
4. Do not drop the unit on a hard surface and do not expose
the unit to moisture or water.
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency
interference. It should revert to normal operation when the
interference stops. If not, it may become necessary to turn the
power Off and back On, or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may
malfunction and lose memory, requiring the user to reset the
device by removing and reinstalling the batteries.

9
CONSUMER SERVICES
We stand behind our products and encourage you to call
our Consumer Services Department with any problems and/
or suggestions that you might have. A service representative
will be happy to help you.
UK Customers:
Phone: [phone] (from UK) or [phone] (outside UK)
Website: www.leapfrog.co.uk/support
Australian Customers:
Phone: [phone]
Website: support.leapfrog.com.au
NZ Customers:
Phone: [phone]
Website: support.leapfrog.com.au
PRODUCT WARRANTY/
CONSUMER GUARANTEES
UK Customers:
Read our complete warranty policy online at leapfrog.com/warranty.
Australian Customers:
VTECH ELECTRONICS (AUSTRALIA) PTY LIMITED –
CONSUMER GUARANTEES
Under the Australian Consumer Law, a number of consumer
guarantees apply to goods and services supplied by VTech
Electronics (Australia) Pty Limited. Please refer to
leapfrog.com/en-au/legal/warranty for further information.

91-003831-001 UK
LeapFrog Enterprises, Inc.
A subsidiary of VTech Holdings Limited.
TM & © 2020 LeapFrog Enterprises, Inc.
All rights reserved.
Printed in China.
Visit our website for more
information about our products,
downloads, resources and more.
leapfrog.com
leapfrog.com.au