LeapFrog Learn&Groove Caterpillar Drums 6102 Assembly Instructions

Parent’s Guide
This guide contains important information. Please keep it for future reference.
91-003726-007 CA
™
US

2
INTRODUCTION
Thank you for purchasing the Learn & Groove®Caterpillar DrumsTM!
Explore three play modes, six musical activities and 28 drum
sounds in this interactive drum toy that teaches music, ABCs
and counting. The caterpillar character makes learning fun
with a movable body and wiggly feet. Kids can play along to
classical music and 14 children’s melodies or create new beats.
Get in the learning groove!
Mode Switch On/Off/Volume
Selector
Wiggly Feet
Tail Rattle
Drums

3
INCLUDED IN THIS PACKAGE
• Learn & Groove®Caterpillar Drums™
• Parent’s guide
WARNING
All packing materials such as tape, plastic sheets, packaging
locks, removable tags, cable ties and packaging screws are not
part of this toy, and should be discarded for your child’s safety.
NOTE
Please keep this parent’s guide as it contains important
information.
ATTENTION
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches, étiquettes et vis d’emballage. Ils ne font
pas partie du jouet.
NOTE
Il est conseillé de conserver ce guide des parents car il comporte
des informations importantes.
Rotate the packaging locks 90
degrees counterclockwise.
Pull out the packaging locks and
discard.
Unlock the Packaging Locks

4
GETTING STARTED
BATTERY REMOVAL AND INSTALLATION
1. Make sure the unit is turned Off.
2. Locate the battery cover on the bottom of the unit and use
a screwdriver to loosen the screw and open the battery cover.
3. Remove old batteries by pulling up on one end of each
battery.
4. Install 2 new AA (AM-3/LR6) batteries following the diagram
inside the battery box.
5. Replace the battery cover and tighten the screw to secure.

5
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as
recommended.
• Do not mix different types of batteries: alkaline, standard
(carbon-zinc) or rechargeable, or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity (+ and - ).
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging
(if removable).
• Rechargeable batteries are only to be charged under adult
supervision.
MISE EN GARDE
• Utiliser des piles alcalines neuves pour des performances
maximales.
• Seules des piles du type recommandé doivent être utilisées.
• Ne pas mélanger différents types de piles ou d’accumulateurs,
ne pas mélanger des piles ou des accumulateurs neufs avec
des usagés.
• Ne pas utiliser des piles ou des accumulateurs endommagés.
• Mettre en place les piles ou les accumulateurs en respectant
les polarités + et –.
• Ne pas mettre les bornes d’une pile ou d’un accumulateur
en court-circuit (en reliant directement le + et le –).
• Enlever les piles ou les accumulateurs usagés du jouet.
• Retirer les piles ou les accumulateurs en cas de non-
utilisation prolongée.
• Ne les jeter ni au feu ni dans la nature.
• Ne pas tenter de recharger des piles non rechargeables.
• Enlever les accumulateurs du jouet pour les recharger.
• Les accumulateurs ne doivent être chargés que sous la
surveillance d’un adulte.

6
PRODUCT FEATURES
1. On/Off/Volume Selector
Locate the On/Off/Volume Selector
under the caterpillar’s chin. Slide it to
turn the toy on and select the sound level.
2. Mode Switch
Locate the Mode Switch near the On/
Off/Volume Selector. Slide it to activate
Jam Session, Songs or Learn mode.
3. Drums
Press any of the Drums to hear fun
sounds, music and singing.
4. Tail Rattle
Spin the Tail Rattle for non-electronic
percussion sounds.
5. Wiggly Feet
Press any of the drums to make the
caterpillar wiggle its feet.

7
6. Automatic Shut off
To preserve battery life, the Learn & Groove®Caterpillar
Drums™ will automatically shut off after approximately
35 seconds without input. The unit can be turned on again
by pressing any drum.
NOTE
If the unit powers down or if the light fades out during play,
please install a new set of batteries.
ACTIVITIES
1. Jam Session Mode
First, select your drum sound: drums with
music, silly sounds, animal sounds or drum
solo. Then press the drums to explore the
music and create your own beats!
2. Songs Mode
Press any drum to play a favorite children’s
song or a classical music piece. Some songs
are played note by note, and others phrase
by phrase.
After the first song, you have the option to
play the Challenge mode. Select to play,
then follow along and press the flashing lights to play the songs.
3. Learn Mode
Enjoy four activities in Learn mode:
1. Count-a-pillar:
Press the drums as they light up. Try to get
to 20 before the music stops!

8
2. Tempo:
Press the drums to speed up or slow down the melody of “Head,
Shoulders, Knees and Toes”! The drum on the far left plays at
the slowest tempo. The music speeds up as you press the drums
moving to the right.
3. Musical Scale:
Press any drum to play the musical scale. After the first song
is finished, you have the option to play the Challenge mode.
Select to play, then follow along and press the flashing lights
to play the song.
4. ABC Song:
Press any drum to play the ABC song. After the first song，
you have the option to play the Challenge mode. Select to play,
then follow along and press the flashing lights to play the song.
MELODIES AND SONGS
1. Old MacDonald Had a Farm
2. Twinkle, Twinkle, Little Star
3. The Itsy Bitsy Spider
4. If You’re Happy and You Know It
5. Frère Jacques
6. Beethoven’s “Ode to Joy”
7. Vivaldi’s “Spring”
8. Rossini’s “William Tell Overture”
9. Bingo
10. Mary Had a Little Lamb
11. The Muffin Man
12. The Wheels on the Bus
13. Counting to 10
14. Five Little Monkeys Jumping on the Bed
15. Head, Shoulders, Knees and Toes
16. Musical Scale
17. ABC Song

9
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep it out of direct sunlight and away from direct heat sources.
3. Remove the batteries if the unit will not be in use for an
extended period of time.
4. Do not drop the unit on a hard surface and do not expose
the unit to moisture or water.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions,
please follow these steps:
1. Turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the
batteries.
4. Turn the unit back On. The unit will now be ready to use again.
5. If the unit still does not work, install a new set of batteries.
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency
interference. It should revert to normal operation when the
interference stops. If not, it may become necessary to turn the
power off and back on, or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may
malfunction and lose memory, requiring the user to reset the
device by removing and reinstalling the batteries.

10
Impact de l’environnement
Une défaillance de fonctionnement de l’appareil peut
survenir s’il est sujet à des interférences avec les fréquences
radioélectriques. Le fonctionnement normal de l’appareil devrait
reprendre avec l’arrêt des interférences. Si ce n’est pas le cas, il
peut s’avérer nécessaire d’éteindre et rallumer l’appareil ou de
retirer et réinstaller les piles. Dans l’éventualité peu probable
d’une décharge électrostatique, un mauvais fonctionnement
et une perte de mémoire de l’appareil peuvent se produire.
L’utilisateur doit alors retirer et réinstaller les piles pour
réinitialiser l’appareil.
NOTE
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.