LeapFrog Magic Adventures GLOBE Assembly Instructions

Parent’s Guide
This guide contains important information.
Please keep it for future reference.
91-003669-001 US

1
Globe
Speaker
Volume Up/Down
Buttons
LCD Screen
Power On/
Off Button
Activity
Panel Stylus Holder
Micro-USB Port
Stylus
INTRODUCTION
Thank you for purchasing the Magic Adventures GlobeTM!
Take a spin around the 10”Globe and explore geography, science,
culture, languages and more through exciting facts, games and
live-action BBC video.
Adventure
Packs
Explore
Mode Button
Brightness
Controls
Games
Selection
Buttons
Navigation
Arrows

2
INCLUDED IN THIS PACKAGE
●Magic Adventures Globe™
●One micro-USB cable
●One parent’s guide
WARNING:
All packing materials, such as tape, plastic sheets, packaging locks,
removable tags, cable ties and packaging screws are not part of
this toy, and should be discarded for your child’s safety.
NOTE:
Please keep this parent’s guide as it contains important information.
ATTENTION :
Pour la sécurité de votre enfant, débarrassez-vous de tous les
produits d’emballage tels que rubans adhésifs, feuilles de plastique,
attaches, étiquettes et vis d’emballage. Ils ne font pas partie du
jouet.
NOTE :
Il est conseillé de conserver ce guide des parents car il comporte
des informations importantes.
Unlock the packaging locks:
Rotate the packaging locks 90
degrees counterclockwise.
Pull out the packaging locks and
discard.

3
GETTING STARTED
BATTERY REMOVAL AND INSTALLATION
1. Make sure the unit is turned Off.
2. Locate the battery cover on
the bottom of the unit, use a
screwdriver to loosen the screw and
open the battery cover.
3. Remove old batteries by pulling up
on one end of each battery.
4. Install 4 new AA (AM-3/LR6)
batteries into the battery box as
illustrated. (The use of new alkaline
batteries is recommended for maximum performance.)
5. Replace the battery cover and tighten the screw to secure.
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as
recommended.
• Do not mix different types of batteries: alkaline, standard
(carbon-zinc) or rechargeable, or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.

4
MISE EN GARDE
• Utiliser des piles alcalines neuves pour des performances
maximales.
• Seules des piles du type recommandé doivent être utilisées.
• Ne pas mélanger différents types de piles ou d’accumulateurs,
ne pas mélanger des piles ou des accumulateurs neufs avec des
usagés.
• Ne pas utiliser des piles ou des accumulateurs endommagés.
• Mettre en place les piles ou les accumulateurs en respectant les
polarités + et –.
• Ne pas mettre les bornes d’une pile ou d’un accumulateur en
court-circuit (en reliant directement le + et le –).
• Enlever les piles ou les accumulateurs usagés du jouet.
• Retirer les piles ou les accumulateurs en cas de non-utilisation
prolongée.
• Ne les jeter ni au feu ni dans la nature.
• Ne pas tenter de recharger des piles non rechargeables.
• Enlever les accumulateurs du jouet pour les recharger.
• Les accumulateurs ne doivent être chargés que sous la
surveillance d’un adulte.

5
Connecting the Adapter
• Make sure the unit is turned Off.
• Connect the adapter to the Micro-USB Port of the unit.
• Plug the adapter into a power socket.
Note: The use of an adapter will override the batteries.
AC Adapter Safety
• The toy is not intended for children under 3 years old.
• As with all electrical products, precautions should be used and
observed during handling and use to prevent electric shock.
• Do not leave the toy plugged in for extended periods of time.
• As with all electrical products, precautions should be observed
during handling to prevent electric shock.
• Connecting an AC adapter to a wall outlet should only be
performed by an adult or a supervised child 8+ years of age.
• Never clean a plugged-in toy with liquid.
• Never use more than one adapter.
• The adapter is not a toy.
• If the USB cable is damaged, it cannot be used and must be
replaced with a recommended cable.
• Examine the power adapter periodically for conditions that may
result in the risk of fire, electric shock, or injury to persons (such
as damage to the output cord, pins, housing or other parts). In
the event of such conditions, the adapter should not be used
until properly repaired or replaced.
AC Adapter Electrical Ratings:
Input: ~120VAC, 60Hz (for US); ~230VAC, 50Hz (for UK or EU);
~240VAC, 50Hz (for AS/NZL)
Output: DC 5V, 1.5A, 7.5VA or DC 5V, 1A, 5VA

6
PRODUCT FEATURES
1. Power On/Off Button
Press and hold the Power On/Off Button for a few seconds. The
Globe will start up and you will hear a welcome message.
2. Stylus
Touch the tip of the Stylus to the Globe or one of the icons on the
Activity Panel.
3. Volume Control
Press the – and + Volume Up/Down Buttons to adjust the volume.
4. Power Supply
This device requires 4 AA batteries or a 5V 1A micro USB power
adapter (not included).
5. Automatic Shut Off
To preserve battery life, the Magic Adventures GlobeTM will
automatically shut off after approximately five minutes without
input. The unit can be turned on again by pressing the Power On/
Off Button.
NOTE:
This product in is Try-Me mode in the packaging. After opening the
package, power on the unit and use the Stylus to touch the Globe or
icons on the Activity Panel.

ACTIVITIES
1. Explore Mode
In Explore mode, you can select any of the following 11 categories
by tapping the Navigation Arrows using the Stylus:
• Continents
• Countries
• Animals
• Geology
• Landmarks
• Capitals
• Languages
• Flags
• Currency
• Size
• Mix-It-Up
After making a selection, use the Stylus to tap the Globe and
explore the world, learning about your chosen category.
2. Game Modes
Launch any of the three game modes by tapping their icon on the
Activity Panel and follow the instructions presented by your hosts,
Reggie and Sarah.
Games include:
• Around the World in 20 Days
• Amazing World Quiz Show
• Where in the World?
7

8
ADVENTURE PACKS (sold separately)
You can download additional content to your Magic Adventures
GlobeTM to expand the categories and games. New subjects include:
Dinosaurs and Prehistoric Beasts, Ancient Civilizations, People and
Inventions, and World Cultures.
Connect the Magic Adventures GlobeTM to your computer with the
included USB cable.
Install the LeapFrog®Connect application from
leapfrog.com/connect on your computer.*
Follow the instructions on screen to create or sign into a LeapFrog®
Parent Account and register your Magic Adventures GlobeTM .
Select App Center to find, purchase and install Adventure Packs.
Disconnect the system and your child is ready to play.
* System requirements can be found at
https://www.leapfrog.com/system-requirements.
WARNING
A very small percentage of the public, due to an existing
condition, may experience epileptic seizures or momentary loss
of consciousness when viewing certain types of flashing colors
or patterns, especially on television. While the Magic Adventures
GlobeTM does not contribute to any additional risks, we do
recommend that parents supervise their children while they play
video games. If your child experiences dizziness, altered vision,
disorientation, or convulsions, discontinue use immediately and
consult your physician. Please note that focusing on an LCD screen
at close range for a prolonged period of time may cause fatigue or
discomfort. We recommend that children take a 15-minute break
for every hour of play.

9
OTHER NOTES:
Static electricity may cause the Magic Adventures GlobeTM
to malfunction. In cases where Magic Adventures GlobeTM is
malfunctioning due to static electricity, reset the Globe by pressing
and holding the Power On/Off Button for about 10 seconds until
the LCD Screen turns off, then wait for a while before restarting
the unit. Or, if the static electricity malfunction occurred during
the downloading process, disconnect the USB Cable, delete the
corrupted file, then reset the Globe as described above. Then,
reconnect the USB Cable and restart the download process.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat source.
3. Remove the batteries if the unit will not be in use for an
extended period of time.
4. Do not drop the unit on hard surfaces and do not expose the
unit to moisture or water.
5. NEVER try to dismantle the unit.
Using the Stylus
• Do not use the Stylus if it is broken.
• Do not look directly into the Stylus light.
• Put the Stylus back in the Stylus Holder when not in use.
Cleaning the LCD Screen
• Slightly dampen a soft, lint-free cloth with water and wipe the
screen to loosen dirt.
• Using a clean and dry cloth, wipe the screen dry. Repeat these
two steps as needed.

10
TROUBLESHOOTING
If for some reason the program/activity stops working, please
follow these steps:
1. Turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit back On. The unit should now be ready to use
again.
5. If the unit still does not work, replace with an entire set of new batteries.
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services Department
at 1-800-701-5327 in the U.S. or email [e-mail].
Creating and developing LeapFrog®products is accompanied by a
responsibility that we take very seriously. We make every effort to
ensure the accuracy of the information, which forms the value of our
products. However, errors sometimes can occur. It is important for
you to know that we stand behind our products and encourage you
to contact us with any problems and/or suggestions you might have.
A service representative will be happy to help you.
Caution: Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.
DISCLAIMER AND LIMITATION OF LIABILITY
LeapFrog and its suppliers assume no responsibility for any damage
or loss resulting from the use of this handbook. LeapFrog and its
suppliers assume no responsibility for any loss or claims by third
parties that may arise through the use of this software. LeapFrog
and its suppliers assume no responsibility for any damage or loss
caused by deletion of data as a result of malfunction, dead battery,
or repairs. Be sure to make backup copies of important data on
other media to protect against data loss.

11
Supplier’s Declaration of Conformity
Trade Name: LeapFrog®
Model: 80-605400
Product name: Magic Adventures GlobeTM
Responsible Party: LeapFrog Enterprises, Inc.
Address: 6401 Hollis Street, Suite 100,
Emeryville, CA 94608
Website: leapfrog.com
NOTE:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
CAN ICES-3 (B)/NMB-3(B)

12
USB Cable: The USB cable provided with this product complies
with FCC and other regulatory emission limits. If using a USB
cable other than the one provided, please note that in order not to
exceed FCC and other regulatory emissions limits, a shielded cable
must be used.

LeapFrog Enterprises, Inc.,
a subsidiary of VTech Holdings Limited.
TM & © 2019 VTech Holdings Limited.
All rights reserved.
Printed in China.
Visit our website for more
information about our products,
downloads, resources and more.
leapfrog.com
leapfrog.ca
Read our complete warranty and
legal policies online at
leapfrog.com/legal