LeapFrog Build-a-Slice Pizza Cart User manual

Instruction Manual
This manual contains important information. Please save it for future reference.
Build-a-Slice Pizza Cart
Build-a-Slice Pizza Cart
Build-a-Slice Pizza Cart
Build-a-Slice Pizza Cart

2
INTRODUCTION
Thank you for purchasing the Build-a-Slice Pizza Cart™!
Explore counting, colors and even some Italian phrases while
making, baking and delivering your own pretend pizzas!
Ding! Ding! Order up!
Off/Low/High
Volume Selector
Pizza Slice
Pieces
Oven
Door
Temperature
Dial
Cash Register
Button
Pizza
Spinner
Storage
Drawer
Pizza Toppings
Tray
Menu Board
Handle
Canopy
Shelf
Order
Bell
Pizza
Topping
Pieces
One-Dollar
Bills
Coins
Magic
Spatula
Pizza Cutter
Cheese
Shaker
Pizza
Paddle
Pizza
Box
Plate

3
INCLUDED IN THE PACKAGE
1 canopy
1 Build-a-Slice Pizza Cart™
1 handle 1 menu board

4
6 pizza toppings
1 pizza cutter
10 one-dollar bills
1 cheese shaker
5 coins 1 plate
4 pizza slices1 chimney
1 pizza paddle

5
WARNING
All packing materials such as tape, plastic sheets, packaging
locks, removable tags, cable ties, cords and packaging screws
are not part of this toy, and should be discarded for your child’s
safety.
NOTE
Please save this Instruction Manual as it contains important
information.
ATTENTION :
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches, étiquettes, cordons et vis d’emballage. Ils
ne font pas partie du jouet.
NOTE :
Il est conseillé de sauvegarder ce manuel d’utilisation car il
comporte des informations importantes.
NOTE :
After removing from packaging, wipe all the included pieces
using a slightly damp cloth. Wash the Pizza Cutter, Plate and
the Oven Paddle thoroughly before and after use. To avoid
damaging the electronics, do not submerge the items in water
or expose them to excessive moisture.
1 pizza box
• Quick Start Guide

6
GETTING STARTED
BATTERY REMOVAL AND INSTALLATION
1. Make sure the unit is turned Off.
2. Locate the battery cover on the back of the unit. Use a
screwdriver to loosen the screw and then open the battery
cover.
3. Remove old batteries by pulling up on one end of each battery.
4. Install 3 new AA (AM-3/LR6) batteries following the diagram
inside the battery box. (For best performance, alkaline
batteries or fully charged Ni-MH rechargeable batteries are
recommended.)
5. Replace the battery cover and tighten the screw to secure.

7
IMPORTANT: BATTERY INFORMATION
• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
batteries.
• Only batteries of the same or equivalent type as
recommended are to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in
fire.
RECHARGEABLE BATTERIES
• Remove rechargeable batteries (if removable) from the toy
before charging.
• Rechargeable batteries are only to be charged under adult
supervision.
• Do not charge non-rechargeable batteries.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.
ATTENTION :
Les piles ou accumulateurs doivent être installés par un
adulte. Tenir les piles ou accumulateurs hors de portée des
enfants.

ASSEMBLY
With the Build-a-Slice Pizza CartTM safety comes first. To ensure
your child’s safety, adult assembly is required.
1. Insert the Chimney and Menu Board firmly into the top of the
Pizza Cart.
2. Attach the Canopy onto the Chimney and Menu Board.
8

3. Insert the Handle into the top of the Pizza Cart.
LABEL APPLICATION
Please securely adhere the labels to the cart as indicated below.
Match the label numbers to the corresponding numbered spots
on the cart. Note: Two spots on the Canopy will not receive labels.
They are intended to remain green.
1 2 3 4
$1.00
1
2
3
4
5
5
9

PRODUCT FEATURES
1. Off/Low/High/Volume Selector
Slide the Off/Low/High/Volume
Selector to turn the toy on and to
adjust the volume.
2. Magic Spatula
Place a Pizza Topping on a Pizza
Slice and then scoop it with the Magic
Spatula to hear learning phrases, silly
phrases, melodies and short songs.
3. Order Bell
Press the Order Bell to receive pizza
orders.
4. Pizza Spinner
Slide the arrows to the right to rotate
the Pizza Spinner and activate learning
songs and melodies.
10

5. Oven Dial
Turn the Oven Dial to hear number
songs, numbers in English and Italian
and silly phrases.
6. Pizza Topping Tray
Look at the images on the tray
and then sort the toppings into
their correct spots. The tray is non-
electronic and doesn’t play any audio.
7. Menu Board
Look at the Menu Board to see the
prices of the different pizza slices.
In itself, the Menu Board is non-
electronic, but pressing the Order Bell
will play different pizza orders. Certain
orders will ask kids to reference the
Menu Board and then make slices of
pizza that cost specific amounts.
8. Cash Register Button
Press the Cash Register Button to
count to 10. Reaching 10 plays silly
phrases and farewell phrases in Italian.
11

9. Oven Door
Open and close the Oven Door to
hear fun sounds, fun phrases and
vocabulary phrases.
10. Cheese Shaker
The Cheese Shaker is non-electronic
but periodically the child will be
asked to add a certain amount of
cheese sprinkles to a pizza slice. The
cart will then automatically count to
the requested number while playing
sprinkle sounds.
11. Pizza Box Shelf
The pizza box Shelf is the perfect
width to store the Pizza Box.
12. Automatic Shut Off
To save power, the Build-a-Slice Pizza Cart™ shuts down
after about 30 seconds without input. The unit can be
turned on again by pressing any button.
12

13
ACTIVITIES
1. Order Bell
Pressing the Order Bell triggers a range of pizza slice orders.
Possible orders include making a slice of pizza:
• Based on its food topping name
• Based on its food topping color
• Based on its food topping shape
• Based on its cost as listed on the menu board
• Based on the type of crust.
• The child will be asked to make any type of pizza
and then will be instructed to bake it at a certain
temperature
• That is the “chef’s choice”.
• The child can be creative and put any type of pizza
into the oven
• For delivery.
• The child will be asked to make any type of pizza,
place it into the box and then press the cash register
button a certain amount of times to ring it up
• That is “perfectly baked”.
• The child will be asked to make any type of pizza and
then will be instructed to open the oven door when
the cart counts to a certain number

CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat sources.
3. Remove the batteries if the unit will not be in use for an
extended period of time.
4. Do not drop the unit on hard surfaces and do not expose
the unit to moisture or water.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions,
please follow these steps:
1. Turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit On. The unit should now be ready to use
again.
5. If the unit still does not work, install a new set of batteries.
14

Environmental Phenomena
The unit may malfunction if subjected to radio-frequency
interference. It should revert to normal operation when the
interference stops. If not, it may become necessary to turn the
power Off and back On, or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may
malfunction and lose memory, requiring the user to reset the
device by removing and reinstalling the batteries.
Impact de l’environnement
Une défaillance de fonctionnement de l’appareil peut
survenir s’il est sujet à des interférences avec les fréquences
radioélectriques. Le fonctionnement normal de l’appareil devrait
reprendre avec l’arrêt des interférences. Si ce n’est pas le cas, il
peut s’avérer nécessaire d’éteindre et rallumer l’appareil ou de
retirer et réinstaller les piles. Dans l’éventualité peu probable
d’une décharge électrostatique, un mauvais fonctionnement
et une perte de mémoire de l’appareil peuvent se produire.
L’utilisateur doit alors retirer et réinstaller les piles pour
réinitialiser l’appareil.
15

CAUTION
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
NOTE
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
16

17
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION
IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS
DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS
DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Trade Name: LeapFrog®
Model: 6173
Product Name: Build-a-Slice Pizza Cart™
Responsible Party: LeapFrog Enterprises, Inc.
Address: 2200 Powell St., Suite 500
Emeryville, CA 94608
Website: leapfrog.com
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services
Department at 1-800-701-5327 in the U.S. and Canada, or email
[e-mail]. Creating and developing LeapFrog
products is accompanied by a responsibility that we take very
seriously. We make every effort to ensure the accuracy of the
information, which forms the value of our products. However,
errors sometimes can occur. It is important for you to know that
we stand behind our products and encourage you to contact
us with any problems and/or suggestions you might have. A
service representative will be happy to help you.

LeapFrog Enterprises, Inc.,
A subsidiary of VTech Holdings Limited.
TM & © 2023 LeapFrog Enterprises, Inc.
All rights reserved.
IM-617300-000
Version:0
Read our complete warranty policy online at
leapfrog.com/legal
Visit our website for more
information about our products,
downloads, resources and more.
leapfrog.com
leapfrog.ca