Lefroy Brooks TT 4975 User manual

TT 4975
TEN TEN DOUBLE PAPER HOLDER
INSTALLATION GUIDE

2
DIMENSIONS
TOOLS REQUIRED
Powered drill with Ø6mm drill bit Flat blade screwdriver Spirit level
60mm
265mm
93mm

3
INSTALLATION
1 Use a spirit level to ensure the upper holes
are level then mark the hole positions on the
mounting surface.
2 Drill holes using a Ø6mm drill bit.
3 Insert the wall plugs into the holes then secure
the double paper holder using the screws
supplied. Alternative wall plugs should be used
subject to mounting surface construction (not
supplied).

CUSTOMER SUPPORT
[phone]
LEFROYBROOKS.CO.UK
Whilst every effort is made to ensure the accuracy of these, they are subject to change without notice as part
of the company’s product development process. The use of trademarks, product design and artwork is subject to
licence or agreement with LBIP Ltd. The design registrations, trademark registrations and copyrights are protected
by law and the use or reproduction outside the terms of an agreement is prohibited. The right to modify designs
and dimensions is reserved. LBIP Ltd is a member of ACID (Anti Copying in Design).
© LBIP Ltd 2016
20.065.258A / OCTOBER 2016