LEGRAND C2G RapidRun 60218 User manual

© 2018 Legrand All Rights Reserved
rev.07/18 QSG – 60218
60 Woodlawn Street
West Hartford, CT 06110
Phone [phone]
www.c2g.com
FCC Statement
Note: This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
FCC Statement - §15.105(b):
"This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution - §15.21:
"Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment."
(US) RapidRun® HDMI® + USB Extender
(FR) RapidRun® HDMI® + Extension USB
(ES) Extensor RapidRun® HDMI® + USB
Model 60218

PACKAGE CONTENTS
• 1 x Rapid Run HDMI+USB Extender (TX)
• 1 x Rapid Run HDMI+USB Extender (RX)
• 2 x USB-A to Micro USB-B Cables
• Quick Start Guide
DEVICE INSTALLATION
Note:
• Prior to installation ensure that all devices are
powered off.
Step 1: Connect an HDMI cable (not included) from the
source device to the HDMI INPUT of the transmitter
(TX).
Step 2: Connect the included USB-A to Micro USB-B
cable from a USB source device to the USB INPUT of
the transmitter (TX).
Step 3: Connect the TX connector of the RapidRun
Optical Runner Cable (not included) to the RUNNER TX
port on the transmitter (TX).
Step 4: Connect the RX connector of the RapidRun
Optical Runner Cable to the RUNNER RX port on the
receiver (RX).
Step 5: Connect an HDMI cable (not included) from the
display to the HDMI OUTPUT of the receiver (RX).
Step 6: Connect a USB cable (not included) from a
interactive USB device to the USB OUTPUT (USB-A) of
the receiver (RX).
Step 7: Connect the included USB-A to Micro USB-B
cable to the POWER port on the receiver (RX). Then
connect that USB cable to reliable USB power source
and power on all devices.
C2G WARRANTY
At C2G we want you to be totally confident in your
purchase. That is why we offer a warranty on this
device. If you experience problems due to workmanship
or material defect for the duration of this warranty, we
will repair or replace this device.
To request a Return Merchandise Authorization (RMA)
number, contact customer service at 800-293-4970 or
www.c2g.com.
CONTENU DE L’EMBALLAGE
• 1 x Rapid Run HDMI + Extension USB (TX)
• 1 x Rapid Run HDMI + Extension USB (RX)
• 2 x USB-A à Micro USB-B Câbles
• Guide de démarrage rapide
INSTALLATION DE L’APPAREIL
Remarque :
• Avant l'installation, vérifiez que tous les appareils
sont éteints.
1re étape : Connectez un câble HDMI (non fourni) de
l'appareil source à l'entrée HDMI INPUT de l'émetteur
(TX).
2e étape : Connectez le câble USB-A inclus au câble
Micro USB-B d'un périphérique source USB à l'entrée
USB INPUT de l'émetteur (TX).
3e étape : Raccordez le connecteur TX du câble de
coureur optique RapidRun (non fourni) au port
RUNNER TX de l'émetteur (TX).
4e étape : Connectez le connecteur RX du câble
Runner Optical Runner au port RUNNER RX sur le
récepteur (RX).
5e étape : Connectez un câble HDMI (non inclus) de
l'affichage à la sortie HDMI OUTPUT du récepteur (RX).
6e étape : Connectez un câble USB (non fourni) d'un
périphérique USB interactif à la sortie USB OUTPUT
(USB-A) du récepteur (RX).
7e étape : Connectez le câble USB-A inclus au câble
Micro USB-B au port POWER du récepteur (RX).
Connectez ensuite ce câble USB à une source
d'alimentation USB fiable et allumez tous les appareils.
GARANTIE C2G
Chez C2G, nous voulons que vous ayez une confiance
totale dans votre achat. C’est ce qui explique que nous
offrons une garantie pour cet appareil. En cas de défaut de
matériau ou de fabrication pendant la durée de cette
garantie, nous réparerons ou nous remplacerons cet
appareil.
Pour demander un numéro de RMA (Return Merchandise
Authorization, Autorisation de retour de marchandise), prière
de contacter le service Clientèle au nº 800-293-4970 ou sur
le site www.c2g.com.
CONTENIDO DEL PAQUETE
• 1 x Local extender
• 1 x Extensor remote
• 1 x USB 3.1 Gen 1 Cable
• Guía de instalación rápida
INSTALACIÓN DEL DISPOSITIVO
Nota:
• Antes de la instalación, asegúrese de que todos
los dispositivos estén apagados.
Paso 1: Conecte un cable HDMI (no incluido) desde el
dispositivo fuente a la ENTRADA HDMI del transmisor
(TX).
Paso 2: Conecte el cable USB-A a Micro USB-B
incluido desde un dispositivo fuente USB a la
ENTRADA USB del transmisor (TX).
Paso 3: Conecte el conector TX del cable de recorrido
óptico RapidRun (no incluido) al puerto TX RUNNER en
el transmisor (TX).
Paso 4: Conecte el conector RX del cable de recorrido
óptico RapidRun al puerto RUNNER RX en el receptor
(RX)
Paso 5: Connect an HDMI cable (not included) from the
display to the HDMI OUTPUT of the receiver (RX).
Paso 6: Conecte un cable USB (no incluido) desde un
dispositivo USB interactivo a la SALIDA USB (USB-A)
del receptor (RX).
Paso 7: Conecte el cable USB-A incluido a Micro USB-
B al puerto POWER del receptor (RX). Luego, conecte
ese cable USB a una fuente de alimentación USB
confiable y encienda todos los dispositivos.
Garantía C2G
Desde C2G queremos que tenga plena confianza en su
compra. Por eso ofrecemos una garantía para este
dispositivo. Si experimenta cualquier problema debido a
un defecto en la fabricación o en los materiales durante
el periodo de garantía, repararemos o reemplazaremos
este dispositivo.
Para solicitar un número de autorización de devolución
de mercancía (RMA), póngase en contacto con el
servicio de atención al cliente en el 800-293-4970 o en
www.c2g.com.
(US) RAPIDRUN® HDMI® + USB EXTENDER QUICK START GUIDE
(FR) RAPIDRUN® HDMI® + EXTENDER USB GUIDE DE DÉMARRAGE RAPIDE
(ES) RAPIDRUN® HDMI® + USB EXTENDER GUÍA DE INICIO RÁPIDO