LEGRAND 430570 User manual

USER MANUAL
17" HD LCD colour monitor
4 305 70/71
LE03718AC

Caution
- Installation and adjustment must be carried out by qualified personnel.
- Do not open: risk of electric shock.
Use only at a temperature between 0 °C and 55 °C. Do not use at
a voltage other than that indicated.
2
Contents
1Accessories ............................................................................................................................................ 3
2Characteristics ....................................................................................................................................... 3
3Installation...............................................................................................................................................4
4Connection..............................................................................................................................................4
5Configuration:......................................................................................................................................... 4
6Troubleshooting.....................................................................................................................................5

3
1Accessories
Mains adaptor 1
Audio Jack cable 1
VGA cable 1
Power supply cord 1
2Characteristics
Model no. 4,305 70 4,305 71
Type of screen 17" active-matrix TFT screen 19" active-matrix TFT screen
Display zone (H × V) 337.920 × 270.336 376.320 × 301.056
Aspect ratio 4:3 4:3
Pixel size (mm) 0.264 (H) × 0.264 (V) 0.294 (H) × 0.294 (V)
Colours 16.3 million 16.3 million
Optimal resolution 1.280 × 1.024 1280 × 1024
Brightness (typical) 300 cd/m² 300 cd/m²
Contrast ratio (typical) 1000:1 1000:1
Viewing angle (typical) 160° (H) / 170° (V) 160° (H) / 170° (V)
Response time 5 ms 5 ms
On-screen display language English, German, French, Spanish, Italian,
Portuguese, Russian, Chinese
English, German, French, Spanish, Italian,
Portuguese, Russian, Chinese
Operating temperature 0–55 °C 0–55 °C
Operating humidity 20–70% 20–70%
Connections BNC: 1 input,1 outlet
VGA: 1 input
DVI: 1 input
Audio: 1 input,1 outlet
BNC: 1 input,1 outlet
VGA: 1 input
DVI: 1 input
Audio: 1 input,1 outlet
Power consumption < 25 W < 35 W
Power supply 100–240 V AC; 50/60 Hz 100–240 V AC; 50/60 Hz
Pack dimensions 450 × 150 × 450 mm 500 × 165 × 480 mm

4
3Installation
1 Power supply 12V DC
2 DVI port
3 VGA port
4 Audio jack input
5 Right audio output
6 Left audio output
7 Video input
8 Video output
4Connection
5Configuration:
The "Select" button positioned on the right side of the monitor allows the source to be selected. (VGA, DVI, AV)
To enter the OSD menu, press the "Menu" button positioned on the right side.
To navigate, press the "+" and "–" buttons positioned on the right side.
To configure a parameter, press "Menu" then press "+" or "–" to change it.
To select the choice, press "Menu" or "Select"
To exit a sub-menu or to leave the OSD menu, press "Select".
1 2 3 4 5 6 7 8

5
6Troubleshooting
Problem Solution
1 2 3 4 5 6
No image, no sound •
Poor quality sound, normal image •
Poor quality image, normal sound •••
Line appear on the screen •
Image is distorted •
A diagonal line appears on the screen ••
Poor quality colours ••
No colour ••
•
Verify the following points:
1. Ensure that the monitor is properly connected.
2. It is possible that the monitor is suffering electromagnetic interference. In this case switch it off and back on again.
3. Adjust the brightness.
4. Adjust the contrast.
5. Verify that the video device connected to the monitor emits colours.
6. Adjust the colour parameters.