
Mosaic
™
Thermostat programmable
767 21
N 292285/03
°C
19.0
SSFTTM
W
P1
120 6 18 24h
Auto
Softkey
Set point
Day of week
Absence mode (see page 4)
Lighted Ring
prompt to confirm adjusted menu
options/parameters
Rotating knob
• Selection of the menu options or adjusting
the parameters.
• Temperature setting
Confirmation of the selection
or the actual settings of the
parameters
Softkey
Program
Activates the selected program
Presence mode (see page 4)
Use the same power supply phase for supply and relay.
For an optimal temperature control it is advisable to use a contactor when
operating with a load greater than 4A.
Displays the MENU
Back
Information
Adjust number of days (1-30)
of absence and presence-mode
Softkeys
Technical data
Supply voltage: 230V 50/60Hz
Power consumption: 1 W
Relay output: 1 changeover contact 8A 250V~ cos ϕ= 1
Accuracy: ± 1 s /day, day under typical installation conditions
single strand multi strand
Wire cross-sections: 1,5…4 mm21,5…2,5 mm2
Programs (saved by EEPROM) 4x predefined, 1x individual
Running reserve: 100h for all settings
Range of adjustment: +7°C ... +30°C
Frost protection temperature: +7°C
Storage temperature: - 10°C to +60°C
Ambient temperature - 5°C to +50°C
Operating principle: Typ 1.B. EN 60730-1