LEGRAND SANUS VODLT1-B2 User manual

We’ll Make It Stress-Free
If you have any questions along the way, just give us a call.
P: [phone] • UK: [phone] • EMEA: [phone]
We’re ready to help!
VODLT1-B2
INSTRUCTION MANUAL
Texto en español, página 20 Deutscher Text Seiten 26 Svensk text sida 32
中文文字说明请参见第 38 页
Texte français page 23 Nederlandse tekst op pagina 29
Русский текст: стр. 41
日本語は 35 ページ

2
1
2What is your
wall made of?
Drywall with
steel studs? Unsure?Drywall with
wood studs? Solid concrete or concrete block?
Call Customer Service: [phone]
(EMEA: [phone]; UK: [phone])
Perfect! Perfect!
Steel stud kit required (not included)
Does your TV
(including accessories)
weigh MORE than?
CAUTION:
DO NOT install into
drywall alone
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
Before getting started, let’s make sure this mount is perfect for you!
No — Perfect!
Yes — This mount is NOT compatible. Visit MountFinder.Sanus.com or call
[phone] (EMEA: [phone]; UK: [phone]) to find a
compatible mount.
180 lbs.
(81.6 kg)
130 lbs.
(59 kg)
For walls with
steel studs.
For walls with wood
studs, solid concrete
or concrete block.

3
Please read through these instructions completely to be sure you’re comfortable with this easy install process.
Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.
Do you
have all
the tools
needed?
3
4
CAUTION: Avoid potential personal injuries and property damage!
●This product includes directions and hardware for use with wood stud, solid concrete, concrete block, steel walls – DO NOT install into
drywall alone. For information on how to use this product with steel stud walls contact Customer Service and ask about the steel stud
mounting kit.
●The wall must be capable of supporting four times the weight of the TV and mount combined.
●Do not use this product for any purpose not explicitly specified by manufacturer.
●Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
Ready to
begin?
Wood Stud Install
Concrete Install Steel Stud Install
Pencil Level
Stud Finder
ScrewdriverTape
Measure
7/32 in.
(5.5 mm)
Wood
Drill Bit
Electric Drill
Hammer
1/2 in.
(13 mm)
Socket
Wrench
Drill Bit Drill Bit
3/8 in.
(10 mm)
Concrete
1/2 in.
(13 mm)
Steel

4
WE’RE HERE TO HELP
Our US-based install experts
are standing by to help.
Call us at:
US: [phone]
EMEA: [phone]
UK: [phone]
Get it right the first time.
HeightFinder™ shows you
where to drill.
Check it out at:
SANUS.com/2567
Want to watch a video that
shows how easy this DIY
project will be?
Watch it now at:
SANUS.com/3122

5
27.17in
690mm
MAX
16.73in
425mm
MAX
7.87in
200mm
MIN
7.87in
200mm
MIN
7.00in
177.8mm
3.00in
76.2mm
8.00in
203.2mm
16.00in
406.4mm
24.00in
609.6mm
22.93in
582.4mm
30.00in
762mm
2.18in
55.3mm
7deg
UP
10deg
DOWN
SIMULATED 65"
FLAT SCREEN TV
79,17(5)$&(
:$//3/$7( 7239,(:7902817('
熆'
6,'(9,(:7,/7
6,'(9,(: 7239,(: )8//<$66(0%/('02817
Dimensions

6
NOTE: Not all hardware included will be used.
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact
Customer Service. Never use damaged parts!
Parts and Hardware for STEP 1
Parts and Hardware
2.5mm
5mm
M8 x 16mm
M6 x 25mm
M8 x 20mm
M6 x 20mm
M6 x 12mm
M8 x 30mm
M8 x 50mm
TV Brackets
01 x1
02 x1
Washer
(qty. 4)
04
TV Screws
(qty. 4)
03
TV Spacers
(qty. 4)
05

7
5⁄16 in. x 2 3⁄4 in.
1/4-20 x 1.75
1/4 in.
UX10x60R
For concrete installations ONLY
5⁄16 in. x 2 3⁄4 in.
1/4-20 x 1.75
1/4 in.
UX10x60R
For concrete installations ONLY
Parts and Hardware for STEP 2
Hardware for STEP 2C Steel Stud Option [Steel Stud Anchor Kit is NOT INCLUDED]
Wall Plate
Wall Plate
Template
Lag Bolt
Concrete Anchor
Screw
Washer
Anchor
Hex Key
3/16 in.
Contact Customer Service: [phone] (US), [phone] (EMEA), or [phone] (UK)
to have the additional hardware shipped directly to you.
1/4-20 Snap Toggle BB
09
x4
08 x4
10 x1
S1 x4 S2 x4 S3 x4
07 x1
06 x1

8
M6
M8
1.1 Screw Diameter 1.2 Determine Spacers and Screw Length
STEP 1 Attach Brackets to TV
a:Use no spacers for:
Flat back TVs (AND TV closer
to the wall).
ab
CAUTION: Verify adequate thread
engagement with the screw
or screw/spacer.
-Too short will not hold the TV.
-Too long will damage the TV.
05
Too Short Too Long
Correct
For TVs with supplied spacers, verify
adequate thread engagement with the
screw and spacer.
M8 screws can be used without the washer
for extra thread engagement.
b:Spacers supplied for:
●Round (irregular) back TVs
●Extra space needed (for cables or inset
mounting holes)
FLAT BACK ROUND BACK CABLES INSET HOLES
03
03

9
Adjust the
straps to the
bottom of
the TV.
1.3 Attach TV Brackets
0201
Center the TV brackets 01 and 02 horizontally and vertically, and install using your screw/washer/spacer.
bSPACER, SCREW AND WASHER
05
aSCREW AND WASHER
04
04
03
03

10
CAUTION: Avoid potential personal
injuries and property damage!
●Drywall covering the wall must not
exceed 5/8 in. (16 mm)
●Minimum wood stud size:
nominal 2 x 4 in. (51 x 102 mm) actual 1 x
3 in. (38 x 89 mm)
●Minimum horizontal space between
fasteners: 16 in. (406 mm)
●Stud centers must be verified
1
06
2
Max. 5/8 in. (16 mm)
Min. 16 in. (406 mm)
Min. 3 1/2 in. (89 mm)
Min. 1 1/2 in. (38 mm)
STEP 2 A Attach Wall Plate to Wall
Wood Stud Option

11
CAUTION: Avoid potential personal injury or property damage! All four lag
bolts 08 MUST BE firmly tightened to prevent unwanted movement of the wall
plate 07 .
Go to STEP 3 on PAGE 16.
07
43
08
2 in. (70 mm)
7/32 in.
(5.5 mm)

12
CAUTION: Avoid potential personal injuries and property damage! Mount the
wall plate 07 directly onto the concrete surface.
06
2
1
STEP 2 B Attach Wall Plate to Wall
Solid Concrete or Concrete Block Option
3/8 in.
(10 mm)
3 in. (75 mm)
Min.
8 in.
(203 mm)
Min.
16 in.
(406 mm)
Min.
8 in.
(203 mm)
Min.
8 in.
(203 mm)
Min.
16 in.
(406 mm)

13
3 4
CAUTION: Avoid potential personal injury or property damage! All four lag
bolts 08 MUST BE firmly tightened to prevent unwanted movement of the wall
plate 07 .
09 08 07
Go to STEP 3 on PAGE 16.

14
1 2
06
Min. 16 in.
(406 mm)
Steel Stud Anchor Kit is NOT INCLUDED
Contact Customer Service:
US: [phone]
EMEA: [phone]
UK: [phone]
to have the additional hardware shipped directly to you..
STEP 2 C Attach Wall Plate to Wall
Steel Stud Option
CAUTION: Avoid potential personal injuries
and property damage!
●Studs must be at least 2x4 / 25 ga.
●If back side of wall is unfinished, drywall must be
installed to a minimum of one stud left and right of
the stud(s) being used to install the mount.
●Drywall must be a minimum of 1/2 in. (13mm) thick on
each side of the studs, and a minimum clearance of 1
7/8 in. (48 mm)
behind the wall is required.
●This product must be centered on the studs.
●Stud type and structural strength must conform to
the North American Specification for the Design of
Cold-Formed Steel Structural Members
[362 S 125 18, C-Shape, S - Stud Section].
●Drywall must be secured to studs with screws 12 in.
(304.8 mm) on center.
1 in.
(25 mm)
1/2 in.
(13 mm)
CAUTION: DO NOT
use the three middle slots for
mounting.

15
CAUTION: Avoid potential personal injury or property damage! All four
screws S2 MUST BE firmly tightened to prevent unwanted movement of the
wall plate 07 .
43
07
S2 S3
S1
S1
S1
S1
a
c
b
d
S1

16
CAUTION: Avoid potential personal injury or property damage!
Always make sure your TV brackets 01 and 02 are in the locked position so the TV is securely fastened
to the wall plate 07 .
07 07
1 2 3
0201 0201
STEP 3 Attach TV to Wall Plate

17
02 02
01 01
10 10 10
Adjustments
LEVEL HEIGHT

18
07
TILT TV LATERAL SHIFT
02 01
Your TV should adjust easily when moved,
then stay in place.
Adjust the tilt tension knob Tif your TV
naturally tilts up or down.
NOTE: If you do not intend to adjust
the tilt for different viewing locations, you
can tighten the tilt tension knobs Tto
prevent unwanted movement.
TCAUTION: Avoid potential personal injury
or property damage!
Slowly slide the TV along the wall plate to
reposition. The wall plate has built-in stops to
limit lateral movement.

19
REMOVING THE TV
07
1 2 3
02 01
NOTE: To rehang the TV, follow the procedures in STEP 3 on PAGE 16.

20
59 kg
(130 lbs)
81,6 kg
(180 lbs)
INSTRUCCIONES IMPORTANTES DE SEGURIDAD: GUARDE ESTAS INSTRUCCIONES Y LEA TODO EL MANUAL ANTES DE UTILIZAR ESTE PRODUCTO.
Antes de empezar, asegúrese de que este es el soporte adecuado para usted.
Lea atentamente estas instrucciones en su totalidad para asegurarse de que está familiarizado con el sencillo proceso de instalación. Consulte igualmente el
manual de su televisor para conocer si existen requisitos especiales para el montaje de su aparato.
Si no entiende las instrucciones o si tiene dudas acerca de la seguridad de la instalación, el montaje o el uso del producto, póngase en contacto con el servicio de
atención al cliente o llame a nuestro servicio técnico al número [phone] (EMEA: [phone]; UK: [phone]).
¿Tiene todas las
herramientas
necesarias?
2
3
4
¿De qué está
hecha la pared?
PRECAUCIÓN: Evite posibles lesiones personales y daños materiales!
●Este producto incluye instrucciones y accesorios para su uso en montantes de madera, hormigón macizo y paredes de bloques de hormigón: NO lo instale en
paredes únicamente de yeso. Para obtener información sobre cómo usar este producto en paredes con montantes de acero, póngase en contacto con el servicio
de atención al cliente y pregunte por el kit de montaje en montantes de acero.
●La pared debe ser capaz de soportar hasta cinco veces el peso del televisor y la montura combinados.
●No utilice este producto para ningún otro propósito que no sea el explícitamente especificado por el fabricante.
●El fabricante no se responsabiliza de ningún daño o lesión resultante del montaje incorrecto o el uso indebido.
¿Preparado para
empezar?
¿Paneles de yeso
con montantes
deacero?
¿Paneles de yeso con
montantes
de madera?
¿Hormigón
macizo o bloques
de hormigón?
¡Perfecto! ¡Perfecto!
Se requiere un kit para montantes de acero [NO INCLUIDO]
1¿Su televisor
(incluidos los accesorios)
pesa más
de
No: ¡Perfecto!
Sí: Este soporte NO es compatible.
Visite MountFinder.Sanus.com o llame al [phone] (EMEA: +31 (0)
495 580 852; UK: [phone]) para buscar un soporte compatible.
Para paredes de yeso,
hormigón macizo o
bloques de hormigón
Para paredes con
montantes de
acero
PRECAUCIÓN:
NO instalar en panel
de yeso solo Llame al Servicio de Atención al Cliente: [phone]
(EMEA: [phone]; UK: [phone])
13 mm
(1/2 pulgada)
5,5 mm
(7/32 pulgadas)
Madera
10 mm
(3/8 pulgadas)
Hormigón
13 mm
(1/2 pulgadas)
Acero
DestornilladorCinta métrica Broca Broca Broca
Taladro
eléctrico MartilloLlave de vaso Localizador de
montantes PunzónLápiz Nivel
Paredes con montantes
de madera
Paredes de hormigón
Paredes con montantes
de acero
Español