LEGRAND KEOR HP Series Installation and operation manual

Installation and start-up of UPS Keor Hp 60-160kVA
Installation et démarrage de l'UPS Keor Hp 60-160 kVA
Installazione e avviamento UPS Keor Hp 60-160kVA
Rev. Descrizione
Description Data Date Emesso Issued Approvato Approved Lingua Language Pagina Page di Pag. of Pag.
D Upgrade after FAT / Mise à niveau après FAT /
Aggiornamenti dopo FAT 26.02.15 E. Biancucci G. Senesi E/F/I 1 112
Codice / Code
OMD10073
INSTALLATION AND START-UP OF UPS KEOR HP
60-160KVA
INSTALLATION ET DEMARRAGE DE L'UPS
KEOR HP 60-160 KVA
INSTALLAZIONE E AVVIAMENTO UPS KEOR HP
60-160KVA

Installation and start-up of UPS Keor Hp 60-160kVA
Installation et démarrage de l'UPS Keor Hp 60-160 kVA
Installazione e avviamento UPS Keor Hp 60-160kVA
2 OMD10073 REV. D
Index / Indice
ENGLISH LANGUAGE ...............................................................................7
1SCOPE.................................................................................................8
2SAFETY RULES AND WARNINGS.....................................................9
2.1UPS USE.......................................................................................................................9
2.2KEOR HP RATING.....................................................................................................10
2.3SPECIAL SAFETY WARNINGS.................................................................................11
2.3.1General warnings ..............................................................................................11
2.3.2Personnel...........................................................................................................11
2.3.3Transport and handling ....................................................................................11
2.3.4Installation .........................................................................................................12
2.3.5Electrical connection ........................................................................................13
2.3.6Operation ...........................................................................................................14
2.3.7Maintenance.......................................................................................................15
2.3.8Storage...............................................................................................................16
2.4ENVIRONMENTAL PROTECTION ............................................................................16
2.4.1ISO 14001 certification......................................................................................16
2.4.2Recycling of packing materials........................................................................16
2.4.3Device disposal .................................................................................................16
3INSTALLATION .................................................................................17
3.1RECEIPT OF THE UPS..............................................................................................17
3.1.1Storage...............................................................................................................17
3.2HANDLING OF THE UPS...........................................................................................18
3.3POSITIONING AND INSTALLATION.........................................................................19
3.3.1Base plan, static load and weights..................................................................20
3.3.2Overall dimensions ...........................................................................................21
3.3.3Minimum distances from the walls and ventilation........................................22
3.3.4Environmental installation conditions ............................................................23
4ELECTRICAL CONNECTION............................................................25
4.1BACKFEED PROTECTION DEVICE .........................................................................27
4.2TERMINAL BOARDS.................................................................................................28
4.3CONNECTION OF POWER CABLES........................................................................30
4.4CONNECTION OF AUXILIARY CABLES..................................................................31
4.4.1External manual bypass ...................................................................................32

Installation and start-up of UPS Keor Hp 60-160kVA
Installation et démarrage de l'UPS Keor Hp 60-160 kVA
Installazione e avviamento UPS Keor Hp 60-160kVA
OMD10073 REV. D 3
4.4.2Diesel generator (DIESEL MODE) ................................................................... 32
4.4.3Auxiliary battery contact.................................................................................. 32
4.4.4Remote emergency power off (EPO) .............................................................. 32
4.5SERIAL INTERFACES............................................................................................... 33
4.6RELAY CARD CONNECTION................................................................................... 34
4.7BATTERY TEMPERATURE PROBE......................................................................... 34
5STARTUP AND SHUTDOWN........................................................... 35
5.1PRELIMINARY CHECKS........................................................................................... 35
5.2START-UP PROCEDURE ......................................................................................... 36
5.3BASIC TROUBLESHOOTING................................................................................... 37
5.4SHUT-DOWN PROCEDURE ..................................................................................... 38
5.5SWITCHING PROCEDURE TO MANUAL BYPASS................................................. 39
5.6RESTART FROM MANUAL BYPASS....................................................................... 40
FRANÇAIS................................................................................................ 42
1PORTEE ............................................................................................ 43
2RÈGLES DE SECURITE ET AVERTISSEMENTS............................ 44
2.1UTILISATION DE L'UPS............................................................................................ 44
2.2VALEURS NOMINALES DU KEOR HP .................................................................... 45
2.3AVERTISSEMENTS SPÉCIFIQUES RELATIFS À LA SÉCURITÉ .......................... 46
2.3.1Avertissements généraux................................................................................ 46
2.3.2Personnel .......................................................................................................... 46
2.3.3Transport et manutention ................................................................................ 46
2.3.4Installation......................................................................................................... 47
2.3.5Raccordement électrique................................................................................. 48
2.3.6Fonctionnement................................................................................................ 49
2.3.7Maintenance...................................................................................................... 50
2.3.8Stockage............................................................................................................ 51
2.4PROTECTION DE L'ENVIRONNEMENT .................................................................. 51
2.4.1Certification ISO 14001..................................................................................... 51
2.4.2Recyclage des matériaux d'emballage........................................................... 51
2.4.3Mise au rebut de l'appareil............................................................................... 51
3INSTALLATION................................................................................. 52
3.1RECEPTION DE L'UPS ............................................................................................. 52
3.1.1Stockage............................................................................................................ 52
3.2MANUTENTION DE L'UPS........................................................................................ 53

Installation and start-up of UPS Keor Hp 60-160kVA
Installation et démarrage de l'UPS Keor Hp 60-160 kVA
Installazione e avviamento UPS Keor Hp 60-160kVA
4 OMD10073 REV. D
3.3POSITIONNEMENT ET INSTALLATION...................................................................54
3.3.1Plan de base, charge statique et poids...........................................................55
3.3.2Dimensions totales ...........................................................................................56
3.3.3Dégagement minimum et ventilation...............................................................57
3.3.4Conditions environnementales d'installation.................................................58
4RACCORDEMENT ELECTRIQUE.....................................................60
4.1DISPOSITIF DE PROTECTION CONTRE LE RETOUR DE TENSION.....................62
4.2BORNIERS .................................................................................................................63
4.3RACCORDEMENT DES CÂBLES D'ALIMENTATION..............................................65
4.4RACCORDEMENT DES CABLES AUXILIAIRES .....................................................66
4.4.1By-pass manuel externe...................................................................................67
4.4.2Générateur diesel (MODE DIESEL)..................................................................67
4.4.3Contact de batterie auxiliaire ...........................................................................67
4.4.4Arrêt d'urgence (EPO) distant..........................................................................67
4.5INTERFACES SERIE..................................................................................................68
4.6RACCORDEMENT DE LA CARTE RELAIS..............................................................69
4.7SONDE DE TEMPERATURE DES BATTERIES .......................................................69
5DÉMARRAGE ET ARRÊT.................................................................70
5.1VERIFICATIONS PRELIMINAIRES ...........................................................................70
5.2PROCEDURE DE DEMARRAGE...............................................................................71
5.3DÉPANNAGE DE BASE ............................................................................................72
5.4PROCÉDURE D'ARRÊT ............................................................................................74
5.5PROCÉDURE DE BASCULEMENT EN BY-PASS MANUEL ...................................75
5.6REDEMARRAGE DEPUIS LE BY-PASS MANUEL ..................................................76
LINGUA ITALIANA ...................................................................................78
6APPLICABILITA’ ...............................................................................79
7REGOLE E AVVERTENZE DI SICUREZZA......................................80
7.1UTILIZZO DEL DISPOSITIVO....................................................................................80
7.2DATI NOMINALI KEOR HP........................................................................................81
7.3INDICAZIONI PARTICOLARI SULLA SICUREZZA ..................................................82
7.3.1Avvertenze generali ..........................................................................................82
7.3.2Personale ...........................................................................................................82
7.3.3Trasporto e movimentazione............................................................................82
7.3.4Installazione.......................................................................................................83
7.3.5Collegamento elettrico......................................................................................84

Installation and start-up of UPS Keor Hp 60-160kVA
Installation et démarrage de l'UPS Keor Hp 60-160 kVA
Installazione e avviamento UPS Keor Hp 60-160kVA
OMD10073 REV. D 5
7.3.6FunzIonamento ................................................................................................. 85
7.3.7Manutenzione.................................................................................................... 86
7.3.8Immagazzinamento........................................................................................... 87
7.4TUTELA AMBIENTALE............................................................................................. 87
7.4.1Certificazione ISO 14001.................................................................................. 87
7.4.2Riciclaggio dei materiali di imballaggio ......................................................... 87
7.4.3Smaltimento del dispositivo............................................................................ 87
8INSTALLAZIONE .............................................................................. 88
8.1RICEZIONE DELL’UPS ............................................................................................. 88
8.1.1Immagazzinamento........................................................................................... 88
8.2MOVIMENTAZIONE DELL’UPS................................................................................ 89
8.3POSIZIONAMENTO ED INSTALLAZIONE ............................................................... 90
8.3.1Pianta di base, carico statico e pesi ............................................................... 91
8.3.2Dimensioni di ingombro................................................................................... 92
8.3.3Distanze minime dalle pareti e ventilazione................................................... 93
8.3.4Condizioni ambientali di installazione............................................................ 94
9ALLACCIAMENTO ELETTRICO ...................................................... 96
9.1PROTEZIONE CONTRO IL RITORNO DI TENSIONE (BACKFEED)....................... 98
9.2MORSETTIERE.......................................................................................................... 99
9.3COLLEGAMENTO CONDUTTORI DI POTENZA ................................................... 101
9.4COLLEGAMENTO CAVI AUSILIARI....................................................................... 102
9.4.1Manual bypass esterno.................................................................................. 103
9.4.2Generatore diesel (DIESEL MODE) ............................................................... 103
9.4.3Contatto ausiliario batteria ............................................................................ 103
9.4.4Spegnimento remoto (EPO)........................................................................... 103
9.5INTERFACCE SERIALI ........................................................................................... 104
9.6COLLEGAMENTO SCHEDA RELÈ ........................................................................ 105
9.7SONDA TERMICA ................................................................................................... 105
10AVVIAMENTO E ARRESTO............................................................106
10.1VERIFICHE PRELIMINARI...................................................................................... 106
10.2PROCEDURA DI AVVIAMENTO............................................................................. 107
10.3RICERCA GUASTI DI BASE................................................................................... 108
10.4PROCEDURA DI ARRESTO ................................................................................... 109
10.5PROCEDURA DI TRASFERIMENTO SU BYPASS MANUALE ............................. 110
10.6RIAVVIO DA BYPASS MANUALE.......................................................................... 111

Installation and start-up of UPS Keor Hp 60-160kVA
Installation et démarrage de l'UPS Keor Hp 60-160 kVA
Installazione e avviamento UPS Keor Hp 60-160kVA
6 OMD10073 REV. D
Index of pictures / Indice delle figure
Picture 1 – Rating plate of KEOR HP......................................................................................................... 10
Picture 2 – Handling of UPS KEOR HP...................................................................................................... 18
Picture 3 – Base plan.................................................................................................................................. 20
Picture 4 – Overall dimensions of UPS KEOR HP..................................................................................... 21
Picture 5 – Minimum distances from the walls ........................................................................................... 22
Picture 6 – Position of power terminals of KEOR HP................................................................................. 28
Picture 7 – Position of auxiliary terminals of KEOR HP ............................................................................. 31
Picture 8 – Auxiliary terminals of KEOR HP............................................................................................... 32
Picture 9 – Interfaces of UPS KEOR HP.................................................................................................... 33
Picture 10 – Relay card .............................................................................................................................. 34
Illustration 1 – Plaque signalétique du KEOR HP ...................................................................................... 45
Illustration 2 – Manutention de l'UPS KEOR HP........................................................................................ 53
Illustration 3 – Plan de base ....................................................................................................................... 55
Illustration 4 – Dimensions totales de l'UPS KEOR HP ............................................................................. 56
Illustration 5 – Dégagement minimum........................................................................................................ 57
Illustration 6 – Position des bornes du KEOR HP...................................................................................... 63
Illustration 7 – Position des bornes auxiliaires du KEOR HP..................................................................... 66
Illustration 8 – Bornes auxiliaires du KEOR HP ......................................................................................... 67
Illustration 9 – Interfaces du KEOR HP...................................................................................................... 68
Illustration 10 – Carte relais........................................................................................................................ 69
Figura 1 – Targhetta caratteristica KEOR HP ............................................................................................ 81
Figura 2 – Movimentazione UPS KEOR HP .............................................................................................. 89
Figura 3 – Pianta di base............................................................................................................................ 91
Figura 4 – Ingombri UPS KEOR HP........................................................................................................... 92
Figura 5 – Distanze minime dalle pareti..................................................................................................... 93
Figura 6 – Posizione morsetti potenza KEOR HP...................................................................................... 99
Figura 7 – Posizione morsetti ausiliari KEOR HP .................................................................................... 102
Figura 8 – Morsetti ausiliari KEOR HP..................................................................................................... 103
Figura 9 – Interfacce KEOR HP ............................................................................................................... 104
Figura 10 – Scheda relè ........................................................................................................................... 105

Installation and start-up of UPS Keor Hp 60-160kVA
Installation et démarrage de l'UPS Keor Hp 60-160 kVA
Installazione e avviamento UPS Keor Hp 60-160kVA
OMD10073 REV. D 7
ENGLISH LANGUAGE

Installation and start-up of UPS Keor Hp 60-160kVA
Installation et démarrage de l'UPS Keor Hp 60-160 kVA
Installazione e avviamento UPS Keor Hp 60-160kVA
8 OMD10073 REV. D
1 SCOPE
The instructions contained in the operating manual are applicable to the whole production
range of KEOR HP UPS systems, as indicated below.
KEOR HP 60kVA
KEOR HP 80kVA
KEOR HP 100kVA
KEOR HP 125kVA
KEOR HP 160kVA
Storing documentation
This manual and any other supporting technical documentation relating to the product
must be stored and made accessible to personnel in the immediate vicinity of the
UPS.
Further information
In the event that the information provided in this manual is not sufficiently exhaustive,
please contact the manufacturer of the device, whose details are available in the
“Contacts” section.

Installation and start-up of UPS Keor Hp 60-160kVA
Installation et démarrage de l'UPS Keor Hp 60-160 kVA
Installazione e avviamento UPS Keor Hp 60-160kVA
OMD10073 REV. D 9
2 SAFETY RULES AND WARNINGS
2.1 UPS USE
Congratulations on choosing a product from Legrand for the safety of your equipment. To
obtain the best performance from your KEOR HP UPS system (Uninterruptible Power Supply),
we suggest that you take your time to read the following manual.
The purpose of this manual is to give a short description of the parts composing the UPS and
to guide the installer or the user through the installation of the unit in its using environment.
The installer or the user must read and correctly perform the instructions included in the
present manual, with particular reference to the requirements regarding safety, in compliance
with the current regulations.
Read the technical documentation
Before installing and using the device, make sure you have read and understood all
the instructions contained in the present manual and in the technical supporting
documentation.

Installation and start-up of UPS Keor Hp 60-160kVA
Installation et démarrage de l'UPS Keor Hp 60-160 kVA
Installazione e avviamento UPS Keor Hp 60-160kVA
10 OMD10073 REV. D
2.2 KEOR HP RATING
UPS KEOR HP is provided with an identification plate containing the operation ratings. The
plate is fixed on the inside of the door.
Picture 1 – Rating plate of KEOR HP
Check the technical characteristics
Before carrying out any installation or start-up operation on the UPS, make sure its
technical characteristics are compatible with the AC supply line and with the output
loads.

Installation and start-up of UPS Keor Hp 60-160kVA
Installation et démarrage de l'UPS Keor Hp 60-160 kVA
Installazione e avviamento UPS Keor Hp 60-160kVA
OMD10073 REV. D 11
2.3 SPECIAL SAFETY WARNINGS
2.3.1 General warnings
UPS KEOR HP is provided with various stickers with indications regarding specific dangers.
These stickers must be always well visible and replaced in case they are damaged.
The present documentation must be always available in proximity to the device. In case of
loss we recommend to request a copy to the manufacturer, whose details are available in the
“Contacts” section.
2.3.2 Personnel
Any operation on UPS KEOR HP must be carried out by qualified personnel.
By qualified and trained person we mean someone skilled in assembling, installing, starting
up and checking the correct operation of the product, who is qualified to perform his/her job and
has entirely read and understood this manual, especially the part regarding safety. Such training
and qualification shall be considered as such, only when certified by the manufacturer.
2.3.3 Transport and handling
Avoid bending or deforming the components and altering the insulation distances while
transporting and handling the product.
Undistributed weight
The weight of the UPS is not uniformly distributed. Pay attention when lifting.
Please inspect the device before installing it. In case any damage is noticed from the
conditions of the package and/or from the outside appearance of the equipment, contact the
shipping company or your dealer immediately. The damage statement must be made within 6
days from receipt of the product and must be notified to the shipping carrier directly. Should the
product need to be returned to the manufacturer, please use the original package.
Injury hazard due to mechanical damage
Mechanical damage to the electrical components constitutes a serious danger to
persons and property. In case of doubt regarding the non-integrity of the package or
of the product contained therein, contact the manufacturer before carrying out the
installation and/or the start-up.

Installation and start-up of UPS Keor Hp 60-160kVA
Installation et démarrage de l'UPS Keor Hp 60-160 kVA
Installazione e avviamento UPS Keor Hp 60-160kVA
12 OMD10073 REV. D
2.3.4 Installation
The product must be installed in strict compliance with the instructions contained in the
technical back-up documentation, including the present safety instructions. In particular, the
following points must be taken into account:
The product must be placed on a base suitable to carry its weight and to ensure its
vertical position;
The UPS must be installed in a room with restricted access, according to standard
CEI EN62040-1;
Never install the equipment near liquids or in an excessively damp environment;
Never let a liquid or foreign body penetrate inside the device;
Never block the ventilation grates;
Never expose the device to direct sunlight or place it near a source of heat.
Special environmental conditions
UPS KEOR HP is designed for normal climatic and environmental operating
conditions as defined in the technical specification: altitude, ambient operating
temperature, relative humidity and environmental transport and storage conditions. It
is necessary to implement specific protective measures in case of unusual
conditions:
harmful smoke, dust, abrasive dust;
humidity, vapour, salt air, bad weather or dripping;
explosive dust and gas mixture;
extreme temperature variations;
bad ventilation;
conductive or radiant heat from other sources;
strong electromagnetic fields;
radioactive levels higher than those of the natural environment;
fungus, insects, vermin.
Use authorized personnel only
All transport, installation and start-up operations must be carried out by qualified and
trained personnel.
The installation of UPS KEOR HP must be carried out by authorized personnel, in
compliance with national and local regulations.

Installation and start-up of UPS Keor Hp 60-160kVA
Installation et démarrage de l'UPS Keor Hp 60-160 kVA
Installazione e avviamento UPS Keor Hp 60-160kVA
OMD10073 REV. D 13
Do not modify the device
Do not modify the device in any way: this may result in damage to the equipment
itself as well as to objects and persons. Maintenance and repair must be carried out
by authorized personnel only. Contact the manufacturer for details of the nearest
service centre.
2.3.5 Electrical connection
The UPS connection to the AC power must be carried out in compliance with the current
regulations.
Make sure the indications specified on the identification plate correspond to the AC power
system and to the actual electrical consumption of all of the equipment connected.
Check the conformity of the documentation
The UPS must be installed according to the requirements of HD 384.4.42 S1/A2 and
in compliance with standard CEI 60346-4-42.
Before connecting the unit to the distribution network, make sure you have received
the approval of the electrical power distribution Authority, so as provided for by the
current national regulations.
IT system
The UPS is also designed to be connected to an IT power distribution system.
All the electrical connections must be carried out by authorized personnel. Before connecting
the device make sure that:
the connection cable to the AC line is properly protected;
the nominal voltages, the frequency and the phase rotation of the AC supply are
respected;
the polarities of the DC cables coming from the battery have been checked;
no leakage current to earth is present.
The device is connected to the following voltage supplies:
DC battery voltage;
AC mains voltage;
AC bypass voltage.

Installation and start-up of UPS Keor Hp 60-160kVA
Installation et démarrage de l'UPS Keor Hp 60-160 kVA
Installazione e avviamento UPS Keor Hp 60-160kVA
14 OMD10073 REV. D
Injury hazard due to electric shock!
The device is subject to high voltages, thus all safety instructions must be
scrupulously adhered to before performing any operation on UPS KEOR HP:
Isolate the battery via DC circuit breakers before connecting it to the UPS;
Connect the ground cable to the relevant bar before carrying out any other
connection inside the device.
Injury hazard due to electric shock!
If primary power isolators are installed in an area other than the UPS one, you must
stick the following warning label on the UPS. “ISOLATE THE UNINTERRUPTIBLE
POWER SUPPLY (UPS) BEFORE WORKING ON THIS CIRCUIT”
2.3.6 Operation
The installations to which the UPS systems belong must comply with all the current safety
standards (technical equipment and accident-prevention regulations). The device can be
started, operated and disconnected only by authorized personnel.
The settings can only be changed using the original interface software.
Injury hazard due to electric shock!
During operation, UPS KEOR HP converts power characterized by high voltages and
currents.
All the doors and the covers must remain closed.
Injury hazard due to contact with toxic substances
The battery supplied with the UPS contains small amounts of toxic materials. To
avoid accidents, the directives listed below must be observed:
Never operate the UPS if the ambient temperature and relative humidity are
higher than the levels specified in the technical documentation.
Never burn the battery (risk of explosion).
Do not attempt to open the battery (the electrolyte is dangerous for the eyes
and skin).
Comply with all applicable regulations for the disposal of the battery.

Installation and start-up of UPS Keor Hp 60-160kVA
Installation et démarrage de l'UPS Keor Hp 60-160 kVA
Installazione e avviamento UPS Keor Hp 60-160kVA
OMD10073 REV. D 15
2.3.7 Maintenance
Service and repairs must be carried out by skilled and authorized personnel. Before carrying
out any maintenance operation, UPS KEOR HP must be disconnected from AC and DC supply
sources.
The device is provided with internal isolators which allow to isolate the internal power circuits.
However the voltages of the supply sources are present on the terminals. To isolate the device
completely, provide external circuit breakers on the lines.
The device contains dangerous voltages even after shutdown and disconnection from the
supply sources, due to the internal capacitors which discharge slowly. Thus we recommend to
wait at least 5 minutes before opening the device doors.
Injury hazard due to electric shock!
Any operation must be carried out only when voltage is absent and in compliance
with safety directives.
Make sure the battery circuit breaker that may be placed near the battery has
been opened.
Isolate the device completely by operating the external circuit breakers.
Wait at least 5 minutes in order to allow the capacitors to discharge.
After switching off and disconnecting the device there still might be very hot components
(magnetic parts, heat sinks); therefore we recommend to use protective gloves.
High temperature of components
It is strongly recommended to use protective gloves due to the high temperatures that
may be reached during the operation.
Sectioning of the neutral conductor
The UPS KEOR HP is provided with a sectioning device of the neutral conductor.
The sectioning of the neutral conductor allows the electrical isolation of the UPS
internal parts in order to avoid, during a maintenance or repair, possible operations of
the protective devices on the UPS supply line.
The neutral sectioning device can be opened only when the UPS is in MANUAL
BYPASS operation.
It is mandatory to reconnect the neutral sectiong device before re-starting the UPS.

Installation and start-up of UPS Keor Hp 60-160kVA
Installation et démarrage de l'UPS Keor Hp 60-160 kVA
Installazione e avviamento UPS Keor Hp 60-160kVA
16 OMD10073 REV. D
2.3.8 Storage
If the product is stored prior to installation, it should remain stored in its original package in a
dry place with a temperature ranging from -10°C to +45°C.
Special environmental conditions
It is necessary to implement specific protective measures in case of unusual
environmental conditions:
harmful smoke, dust, abrasive dust;
humidity, vapour, salt air, bad weather or dripping;
explosive dust and gas mixture;
extreme temperature variations;
bad ventilation;
conductive or radiant heat from other sources;
fungus, insects, vermin.
2.4 ENVIRONMENTAL PROTECTION
2.4.1 ISO 14001 certification
Legrand is particularly sensitive to the environmental impact of its products. That is why UPS
KEOR HP has been manufactured with cutting-edge eco-design criteria (ISO 14001
certification).
Special care was taken in using fully recyclable materials and in reducing the amounts of raw
materials used.
2.4.2 Recycling of packing materials
Packing materials must be recycled or disposed of in compliance with applicable local and
national laws and regulations.
2.4.3 Device disposal
At the end of their product life, the materials composing the device must be recycled or
disposed of in compliance with the current local and national laws and regulations.

Installation and start-up of UPS Keor Hp 60-160kVA
Installation et démarrage de l'UPS Keor Hp 60-160 kVA
Installazione e avviamento UPS Keor Hp 60-160kVA
OMD10073 REV. D 17
3 INSTALLATION
3.1 RECEIPT OF THE UPS
Please inspect the device before installing it. In case any damage is noticed from the
conditions of the package and/or from the outside appearance of the equipment, contact the
shipping company or your dealer immediately. The damage statement must be made within 6
days from receipt of the product and must be notified to the shipping carrier directly. Should the
product need to be returned to the manufacturer, please use the original package.
Danger to persons due to transport damages
Mechanical damage to the electrical components constitutes a serious danger to
persons and property. In case of doubt regarding the non-integrity of the package or
of the product contained therein, contact the manufacturer before carrying out the
installation and/or the start-up.
3.1.1 Storage
The package normally ensures protection from humidity and possible damages during
transport. Do not store the UPS outdoor.
Risk of damage due to inappropriate storage
For the environmental storage conditions, refer to the indications given for the
installation of the device.
The device must only be stored in rooms protected from dust and humidity.
The device cannot be stored outdoor.

Installation and start-up of UPS Keor Hp 60-160kVA
Installation et démarrage de l'UPS Keor Hp 60-160 kVA
Installazione e avviamento UPS Keor Hp 60-160kVA
18 OMD10073 REV. D
3.2 HANDLING OF THE UPS
The UPS is packed on a pallet. It is handled from the transport vehicle to the installation (or
storage) place via a fork lift.
The device has a heavy weight
Avoid turnover during the transport of the UPS.
Cabinets must always be handled in upright position.
During loading and unloading operations, always respect the indications
regarding the device barycentre marked on the package.
To handle the UPS remove the lower front and rear panel and insert the forks of a fork lift.
Picture 2 – Handling of UPS KEOR HP

Installation and start-up of UPS Keor Hp 60-160kVA
Installation et démarrage de l'UPS Keor Hp 60-160 kVA
Installazione e avviamento UPS Keor Hp 60-160kVA
OMD10073 REV. D 19
3.3 POSITIONING AND INSTALLATION
UPS KEOR HP must be installed indoor, in a clean and dry room, preferably without dust or
humidity infiltrations. For the environmental conditions in the place of installation, in compliance
with the current legislation, please refer to the “Ventilation” section.
Special environmental conditions
It is necessary to implement specific protective measures in case of unusual
environmental conditions:
harmful smoke, dust, abrasive dust;
humidity, vapour, salt air, bad weather or dripping;
explosive dust and gas mixture;
extreme temperature variations;
bad ventilation;
conductive or radiant heat from other sources;
fungus, insects, vermin.

Installation and start-up of UPS Keor Hp 60-160kVA
Installation et démarrage de l'UPS Keor Hp 60-160 kVA
Installazione e avviamento UPS Keor Hp 60-160kVA
20 OMD10073 REV. D
3.3.1 Base plan, static load and weights
Picture 3 – Base plan
Power (kVA) 60 80 100 125 160
L1 (mm) 815
P1 (mm) 825
L2 (mm) 70
The supporting base of the UPS must be designed to carry the UPS weight and to ensure its
steady and safe support.
Its carrying capacity must be adequate to the static loads indicated in the table below.
Power (kVA) 60 80 100 125 160
Weight (kg) 570 600 625 660 715
Static load (kg/m2) 948 998 1040 1098 1190