LEGRAND NUMERIC 1000 HR-V IBB 28AH User manual

NEW ENERGY
TO POWER
www.numericups.com
1000 HR-V IBB 28AH & 42AH
QUICK SET-UP GUIDE
APPLICATIONS
UNBOXING :
Cut the nylon belt and lift the carton box
from the top. Remove the polythene cover,
foams and lift the UPS from the lower
carton tray.
INSTALLATION :
Step 3
Connect the UPS AC input power plug to socket before
switching the UPS on (Use 3-pin 10A or 16A 240 V AC plug
for 1 kVA.
INSTALLATION :
Step 1
Turn on the battery circuit breaker
Step 2
Connect the application input plug
to the UPS output socket, use 3-pin
6A 240 V AC plug before switching
the UPS on.
2
1
3

Keep the UPS and
its nearby area clean
Do not pull any wires
connected to the UPS
Do not put fingers
into any slot
Keep at least 30 cms.
clear distance between
the rear panel of the UPS
and the wall
Do not eat or drink
near the UPS area.
Do dry your hands before
operating the UPS.
Do’s Don’ts
Display status
for warranty
registration
for unboxing
and quick setup video
Scan the QR code Scan the QR code
INSTALLATION :
Step 4
Press and Hold the ON/Mute button in
the front panel for 2 seconds to switch the
UPS on.
4
1. Power Switch
2. LCD Display
Digital 1000 HR-V
2
1
LCD Display
1. Input voltage
2. Output voltage
3. AC mode indicator
4. Battery mode indicator
5. Battery capacity indicator, flashing indicates low battery
6. Load level indicator; flashing indicates overload
3
2
6
4
5
1