Leica Lino L360 User manual

Leica Lino
L360, L2P5, L2+, L2G+ , L2, P5, P3

1Start up
Leica Lino 757665i en
de
en
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
m
TR
User Manual
Version 757665i
English
Congratulations on your purchase of the Leica Lino.
The safety instructions follow the
section on how to operate the
instrument. Before starting up the
instrument for the first time, please
read through the entire User Manual paying special
attention to the section Safety Instructions .
Contents
Start up ................................................................1
Operation.............................................................3
Technical data ...................................................12
Safety instructions ........................................... 14
Start up
Inserting / replacing batteries
Slide the locking button forwards to unlock the
battery compartment. Open the battery compart-
ment cover and insert the batteries, observing the
correct polarity. Then press the battery compartment
cover back down until it engages.
The battery symbol 9 lights up when the battery
voltage is too low. Replace the batteries as soon as
possible.
• Insert the batteries observing the correct polarity
• Use alkaline batteries or rechargeable batteries only
• Remove the batteries if the instrument is not to
be used for a long period of time (to prevent
corrosion)
L2, P3, P5
L2P5, L2+,
L2G+

2
Start up Leica Lino 757665i en
de
en
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
m
TR
Charging / first-time use
• The battery must be charged prior to first use
because it is delivered with as low an energy
content as possible.
• The permissible temperature range for charging is
between 0°C and +40°C/+32°F and +104°F. For
optimal charging we recommend charging the
batteries at a low ambient temperature of +10°C
to +20°C/+50°F to +68°F if possible.
• It is normal for the battery to become warm
during charging.
1Jack for battery charger
Storage of L360 NiMH Batteries
• Ensure that the product is stored in dry environ-
ment with a temperature range of 0°C to +20°C /
32°F to 68°F, in order to minimize the discharge
rate of the battery.
• Recharge batteries before longer storage
periods.
• At the recommended storage temperature range,
batteries can be stored up to 6 months, after
which the batteries should be fully recharged.
• After longer storage intervals, please recharge
batteries before use.
Lino L360
L360
7 h
1

3Operation
Leica Lino 757665i en
de
en
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
m
TR
Operation
Keypad and control elements
1LASER key
2PULSE/POWER SAVE MODE key
3Lock switch
Display
4Laser crossline
5Horizontal laser line
6Vertical laser line
7Locked
8Pulse/Power save mode ON
9Battery voltage too low
AT Plumb and crossline intersection point
AK Plumb point
AL Laser switched on
3
Lino L360
7
647
519 82
5
6
1
8
2
9
Lino L2
+
7
5
6
1
8
10
11
2
9
Lino L2P5
1
2
4
5
67
8
9
Leica Lino L2
12 9
1
Leica Lino P3
Lino L360
7
5
6
19
Lino L2G
+

4
Operation Leica Lino 757665i en
de
en
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
m
TR
Switching on/off
Lino L360, L2P5, L2+, L2G+, and L2:
•ON: Briefly press the LASER key 1.
•OFF: Press and hold down the LASER key 1.
Lino P3 and Lino P5:
•ON: Move the Lock switch 3to the right.
•OFF: Move the Lock switch 3to the left.
Laser functions
Pressing the LASER key 1activates the following laser functions:
Action
L360 L360 L2P5 L2P5
L2 L2+ L2G+ P3 P5
not in Lock
mode
in Lock
mode
not in Lock
mode
in Lock
mode
1x horizontal
and vertical
only
horizontal
horizontal
and vertical
only
horizontal
horizontal
and vertical
horizontal
and vertical
horizontal
and vertical all 3 points all 5 points
2x only
horizontal only vertical all lines and points only vertical only horizontal
only
horizontal
only
horizontal
only plumb
points
only plumb
points
3x only vertical again as 1x all points again as 1x only vertical only vertical only vertical again as 1x plumb point
and right/left
4x again as 1x - only plumb
point - again as 1x again as 1x again as 1x - again as 1x
5x - - again as 1x - - - - - -

5Operation
Leica Lino 757665i en
de
en
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
m
TR
Self-levelling and Lock functions
The instrument automatically levels itself within the
specified grade range (Refer to "Technical data") .
Press the Lock switch 3in order to transport or tilt
the instrument beyond the self-levelling range. When
locked, the pendulum is fixed and the self-levelling
function is deactivated.
Pulse/Power save mode
(only Lino L360, L2P5, L2+, and L2)
The instrument is fitted with a Power save mode. If
particularly good visibility of the laser line is not
necessary and you wish to save energy, you can
switch the Pulse mode on and off by pressing the
PULSE/POWER SAVE MODE key 2.
To be able to detect the laser lines over long
distances (> 15 m) or in unfavourable lighting condi-
tions, a laser detector can be used. The detector is
able to locate the laser beam in Pulse mode, even
over long distances.
(Laser detector refer to accessories)
The L2G+ operates in a continuously pulsed
mode to optimize battery life and visibility, and as a
consequence the L2G+ has no pulse/Power save
button.

6
Operation Leica Lino 757665i en
de
en
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
m
TR
Applications

7Operation
Leica Lino 757665i en
de
en
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
m
TR
How to use the wall mount bracket:
Lino L360

8
Operation Leica Lino 757665i en
de
en
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
m
TR
Checking the accuracy of the Leica
Lino
Check the accuracy of your Leica Lino regu-
larly and particularly before important measuring
tasks.
Checking the accuracy of the levelling
Set the instrument on a tripod half-way between two
walls (A+B) that are approx. 5 m apart.
Place the Lock switch 3in the "Unlocked" ( )
position.
Direct the instrument at wall A and switch on the
instrument. Activate the horizontal laser line or laser
point and mark the position of the line or the point
on wall A (-> A1).
Rotate the instrument by 180° and mark the hori-
zontal laser line or the laser point in exactly the same
way on wall B (-> B1).
Then place the instrument at the same elevation as
close as possible to wall A and again mark the hori-
zontal laser line or the laser point on wall A (-> A2) .
Rotate the instrument by 180° again and mark the
laser on wall B (-> B2). Measure the distances of the
marked points A1-A2 and B1-B2. Calculate the differ-
ence of the two measurements. If the difference
does not exceed 2 mm, then the Leica Lino is within
tolerance.
| (A1 - A2) - (B1 - B2) | 2 mm
A1 B1
2.5 m 2.5 m
A1
A2
B1
B2
5 m

9Operation
Leica Lino 757665i en
de
en
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
m
TR
Checking the accuracy of the horizontal line
(only Lino L360, L2P5, L2+, L2G+, and L2)
Place the Lock switch 3in the "Unlocked" ( )
position.
Position the instrument approx. 5 m away from the
wall. Direct the instrument at the wall and switch on
with the LASER key 1. Activate the laser line with the
LASER key 1and mark the intersection point of laser
crosshairs on the wall.
Swivel the instrument to the right and then to the
left. Observe the vertical deviation of the horizontal
line from the marking. If the difference does not
exceed 3 mm, then the Leica Lino is within tolerance.
Checking the accuracy of the vertical line:
(only Lino L360, L2P5, L2+, L2G+, and L2)
Place the Lock switch 3in the "Unlocked" ( )
position.
As reference, use a plumb-bob and attach it as close
as possible to an approx. 3 m high wall.
Position the instrument at a distance of approx.
1.5 m from the wall at an elevation of approx. 1.5 m.
Direct the instrument at the wall and switch on with
the LASER key 1. Activate the laser line with the
LASER key 1. Rotate the instrument and align it with
the bottom of the plumb line. Now read off the
maximum deviation of the laser line from the top of
the plumb line. If the difference does not exceed
3 mm, then the Leica Lino is within tolerance.
max.
3 mm
5 m
1.5 m
max.
3 mm