Leister Forte S3 User manual

1
LEISTER Forte S3
Hot Air Blower
Please read operating instructions carefully
before use and keep for further reference.
•Shrinking of shrink-hoods and films used in packaging goods of all types.
•Drying of water-damp surfaces.
•Heating-up for forming, bending and sealing of thermoplastic semi-
finished materials.
•Defrosting of frozen water pipes.
•Activating single or multi-component adhesives.
•Removing old shellac, oil, resin paints and underseals on vehicles.
GB
OPERATING INSTRUCTIONS
APPLICATION
LEISTER Process Technologies, Riedstrasse, CH-6060 Sarnen/Switzerland
Tel. [phone] Fax [phone] www.leister.com [email protected]
®
Официальные поставки www.mikst.ru

Voltage V~
Capacity kW
Temperature °C
Air flow l/min.
Air pressure mbar
Noise level dB (A)
Weight kg
Size mm
3x230, 3x400, 3x440, for 50/60 Hz
10 10 10
650
1000
12
76
3.4 without cable, 5.2 with 10m cable
390 x 132 x 215
2
TECHNICAL DATA
230
400
CAUTION
Approval Marks
This tool is CCA certificated (CENELEC Certification Agreement).
Electrical safety: double insulated
Mains voltage
cannot be
switched over
Danger! Unplug the tool before opening it, as live compo-
nents and connections are exposed.
Incorrect use of hot air tools can present a fire and explosion
hazard, particularly in the proximity of flammable materials
and explosive gases.
The tool must be operated under supervision.
Heat can ignite flammable materials which are not in view.
For personal protection, we strongly recommend the tool to
be connected to an RCCB (Residual Current Circuit Breaker)
before using it on construction sites.
The rated voltage stated on the tool must correspond with
the mains voltage.
Protect the tool from damp and wet.
FI
WARNING
Do not touch the element housing and nozzle when hot as
they can cause burns. Do not point the hot air flow in the
direction of people or animals.
Официальные поставки www.mikst.ru

012
Description of tool
1. Cable to mains
2. Switch: stage 0 = off
stage 1 = cold air
stage 2 = hot air
3. Handle
4. Air intake with grille
5. element housing
6. Stand
Operation
• Connect tool to the mains.
• Set Switch (2) to stage 2 and allow to warm up for about 1 min.
• Rest tool on heat resistant surface. Make sure no objects or obstacles stand in
the way of the air outlet because of the fire hazard.
• The Leister Company, as well as the Service Centres, offer free training courses in
all areas of application (see page 1).
• After completing the work, switch (2) to stage and allow the tool to cool down.
6542
3
1
3
USAGE LEISTER Forte S3
Официальные поставки www.mikst.ru

4
BA Forte S3 / 06.2003
• The tool's air intake grille(4) should be cleaned with a fine brush.
GUARANTEE AND LIABILITY
• Guarantee and liability are in accordance with the guarantee certificate as
well as with the currently valid general business and sales conditions.
• LEISTER Process Technologies rejects any guarantee claims for tools which are
not in their original condition. The tools must never be altered or changed.
Technical data and specifications are subject to change without prior notice.
Your authorized Service Centre is:
MAINTENANCE
SERVICE AND REPAIRS
• The carbon brushes of the welding tool's motor should be checked after
about 1600 hours running time by your Service Centre.
• Repairs should only be carried out by authorised LEISTER Service Centres.
They guarantee a correct and reliable repair service within 24 hours using
original spare parts in accordance with the circuit diagrams and spare
parts lists.
LEISTER Process Technologies, Riedstrasse, CH-6060 Sarnen/Switzerland
Tel. [phone] Fax [phone] www.leister.com [email protected]
®
Официальные поставки www.mikst.ru