Lekker Bikes Mini Commuter User manual

Mini
Commuter
Manual

For the tiny explorers,
the dreamers and seers,
the creators and doers:
This is for you.

Welcome to Lekker!
Time flies by and before we know it, your tiny superhero isn’t so tiny
anymore. Your littlest’s world is growing, and we’re here to grow with
them.
We know it’s an exciting time and we’re just as excited as you! This
might be your little one’s first bike or maybe just their coolest bike, yet.
Either way, it’s the time for new beginnings, new adventures, new fun.
And we love that we get to celebrate it with you.
Australia / NZ / Singapore
1300 053 525
[e-mail]
Europe / USA
0031 8187 8491
[e-mail]

Let’s see what you’ve got.
You have:
• 1 Mini Commuter
• 1 handlebar
• 1 saddle
• 2 training wheels
• 2 pedals
You need:
6mm allen key
15mm spanner
tyre pump

2. Turn the front
wheel to have the
brake facing forward.
3. Remove the black
plastic cap at the end
of the handlebar. Use
a 6mm allen key to
tighten the handlebar
in the right position.
1. Adjust the saddle
height by turning the
seat clamp. Take note
of the minimum seat
height on the
seatpost.

4. Loop the fender stay
over the axel, and if de-
sired put the training
wheel on the outside.
Tighten the bolt with
15mm spanner.
5. Make sure the pedals are
on the correct side! Check the
sticker that indicates R (right)
or L (left) . Tighten the pedals
using a 15mm spanner.
Our fenders are
flexible and will survive
any little fall. Align them
when needed.
Don’t forget to pump
your tyres if needed!

All done. Time to go and explore the world!
#RideLekker
@lekkerbikes @LEKKERbikes www.lekkerbikes.com