LEMANIA X-10 User manual

USER MANUAL
Please read and understand this user
manual carefully before each use.
Model: X-10
This model is designed as an external
battery pack to recharge your 5V and
12V electronic devices, and as a source
of light. It can also be used as an
emergency jump starter that can start
12V and 24V trucks.
WARNING
SAFETY INSTRUCTIONS
Working with batteries is dangerous.
They create explosive gases during
operations. Please use safety gloves
and goggles whenever working
around batteries. Risk of electric
shock or fire. Battery acid is very
corrosive.
Read carefully these instructions
carefully as well as your vehicle’s
battery user manual, before each use.
Pursuant to California Proposition 65,
this product contains chemicals known
to the State of California to cause
cancer and birth defects or other
reproductive harm. Wash hands after
handling.
-Wear appropriate safety equipment,
including goggles and gloves
-Do not use the jump starting
function if the unit is not fully
charged
-Make sure the clamps’ blue
connector is well attached to the
unit
-Never connect the Red Positive and
Black Negative clamps together
-Do not try to open the unit. If
damaged, call customer service or
bring it to a qualified technician.
Do not operate if damaged.
-Keep unit out of reach of children
-Only use in dry and well ventilated
areas
-Do not operate this unit in a
flammable area, and do not use

while battery of vehicle is charging
-Do not expose to heat or freezing
temperatures
-Keep the unit fully charged to
extend the life of the battery
After each use: Disconnect the unit
immediately after the vehicle has
started. Otherwise it might lead to the
creation of gases and a risk of
explosion
Do not try to start the vehicle for more
than 5 sec. and more than 2 times.
A. Product layout
B. Part list
Power
Bank
Home
Charger
Car
Charger
Jumper
Cable
Clamps
12V
Output
Converter
24V
Output
Converter
Only use supplied charger and
accessories
C. Jump Starting Operations
Make sure you unit has enough power
(4 indicator lights should be ON)
1. Check vehicle’s voltage and
select proper voltage converter.
2. Connect the Red Positive clamp
to your battery, and then your
Black negative Clamp to the
chassis of your vehicle. Only
connect to a heavy gauge metal
part of the frame that is
grounded.
Make sure the cables or unit are
not on the way of a moving part.
3. Connect the clamps’ terminal to
the converter and the converter

to the jump starter
4. Start the car (make sure you do
not crank it for more than 5
seconds)
5. Disconnect the converter first
and then the clamps
6. Recharge the unit
Do not make more than 2 attempts and
more than 5 seconds per attempt
D. Indicator Lights
Press the switch button to check the
capacity of Jump starter
When charging, the indicator lights
will flash one by one. The number of
solid indicator lights indicates the
battery capacity of Jump starter.
E. How to charge other digital
devices
Please connect your USB cable to the
USB port (5V/2A) of the unit and press
the switch button.
F. How to use the LED illumination
Press the torchlight button for 4
seconds to activate the large LED panel.
Press it again to turn on the strobe,
slow flash, fast flash or red/blue
emergency function.
G. Specifications
SIZE：183*65*65mm
Weight：1040g
Output：5V—2A ；12/24V Jump Start
Input：12V—2A
Full charging time：7 hours
Peak current：800A
Operating temperature：-10℃-40℃
H. FAQ
Q: How to turn off this device?
A: This device will power off
automatically when no load, or
charging is complete.

Q: Can I Jump Start my vehicle if my
car battery is missing?
A: Yes, you can insert a small pin on
the side of the clamps for 5 seconds.
The LED light will be solid afterwards
Make sure the clamps are not in
contact with each other.
Q: How many times can we jump start
a car when unit is fully charged?
A: It depends on the vehicles,
temperature and state of the battery,
but usually it is in between 3-10 times.
Q: How often should it be recharged?
A: For best results, we recommend
keeping it in charge when not in use.
I. Trouble shooting:
J. Toxic and harmful substances:
K. Warranty Information
1. 1 year limited warranty on
manufacturing defects, on parts and
labor only.
2. Warranty is only valid upon
presentation of the original receipt.
3. Void if serial number, and/or labels
have been removed from unit.
4. Does not cover damage or product
failure resulting from normal wear
and tear, physical abuse, improper
installation, misuse, modifications or
repairs by unauthorized third parties.
5. We are not responsible for any loss
or damage incurred during shipment.
6. We are not responsible for any
incidental or consequential damages
arising from the misuse or abuse of
the product.
7. All warranty claims are limited to
repair or replacement of the
defective item and at the sole
discretion of the manufacturer.
8. If unit is replaced or repaired, it will
be covered for the remaining time of
the original warranty period. Repair
or replacement may involve the use
of reconditioned units which are
equivalent in function.
9. Consumable components, such as
battery or clamps are not covered by
the warranty.

For more information regarding
the warranty, please contact us per
email:
[e-mail]
or per phone: [phone]
(9AM-4PM EST)
This unit can and should be
recycled.