Lennox CMC 020S Installation guide

lennoxemeia.com
COMPACTAIR
CMC - CMH
Installation,
operating
and maintenance
manual
Vertical packaged air conditioner
Packaged unit
20 à100 kW
MIL123E-0613 11-2014
Translation of original manual

1
4
4-5
5
6
6-8
9
10
11-14
15-16
17
17
18
19
20
20
21-22
23-26
27
28-29
30
31
32
2.- INSTALLATION PAGE
3.- COMMISSIONING AND OPERATION PAGE
4.- MAINTENANCE PAGE
DATA PAGE FOR COMMISSIONING UNIT PAGE 3
TABLE OF CONTENTS
POINTS TO BEAR IN MIND PAGE 2
1.- GENERAL CHARACTERISTICS PAGE
1.1.- PHYSICAL DATA
1.2.- ELECTRICAL DATA
1.3.- OPERATING LIMITS
1.4.- INDOORFAN PERFORMANCES
1.5.- RETURN FAN PERFORMANCES
1.6.- OPTION PRESSURE DROP
1.7.- OUTDOO FAN PERFORMANCES
1.8.- PIPING DRAWINGS
1.9.- UNIT DIMENSIONS
2.1.- PRELIMINARY PREPARATIONS
2.2.- UNIT ACCEPTANCE
2.3.- OPTIONAL OPERATIONS PRIOR TO UNIT INSTALATION
2.4.- UNIT LOCATION
2.5.- INSTALLATION CLEARANCES
2.6.- DRAINS
2.7.- ELECTRICAL CONNECTIONS
2.8.- OPTIONS INSTALLATION
3.1.- PRELIMINARY CHECKS BEFORE FIRST INSTALLATION
3.2.- PRELIMINARY CHECKS AT FIRST INSTALLATION
4.1.- PREVENTIVE MAINTENANCE
4.2.- CORRECTIVE MAINTENANCE
4.3.- FAILURE DIAGNOSIS
Lennox have been providing environmental solutions since 1895, our COMPACTAIR range continues to meet the stan-
dards that have made LENNOX a household name. Flexible design solutions to meet YOUR needs and uncompromi-
sing attention to detail. Engineered to last, simple to maintain and Quality that comes as standard.
For information on local contacts at www.lennoxeurope.com.
The manufacturing of these units is made under the requirements of the ISO 9001 and ISO 14001.
All the technical and technological information contained in this manual, including any drawing and technical descrip-
tions provided by us, remain the property of Lennox and must not be used (except in the operation of this product),
reproduced, issued to or made available to third parties without the prior written agreement of Lennox.
WARNING: Read this manual before installation, reparation o maintenance works.

2
Abrasive
surfaces
Risk of injury by
moving objects
High
temperatures
Low
temperatures
Risk of injury by
rotating objects
Electrical
voltage
ELECTRICAL CONNECTIONS
Make sure to switch off the power before installing, repairing or carrying out maintenance on the unit,
in order to prevent serious electrical injury.
Keep local and national legislation in mind when installing the unit.
Standard Guidelines to Lennox equipment
All technical data contained in these operating instructions, including the diagrams and technical description remains
the property of Lennox and may not be used (except for the purpose of familiarizing the user with the equipment),
reproduced, photocopied, transferred or transmitted to third parties without prior written authorization from Lennox.
The data published in the operating instructions is based on the latest information available. We reserve the right to
make modifications without notice.
We reserve the right to modify our products without notice without obligation to modify previously supplied goods.
These operating instructions contain useful and important information for the smooth operation and maintenance of
your equipment.
The instructions also include guidelines on how to avoid accidents and serious damage before commissioning the
equipment and during its operation and how to ensure smooth and fault-free operation. Read the operating instructions
carefully before starting the equipment, familiarize yourself with the equipment and handling of the installation and
carefully follow the instructions. It is very important to be properly trained in handling the equipment. These operating
instructions must be kept in a safe place near the equipment.
Like most equipment, the unit requires regular maintenance. This section concerns maintenance and management
personnel.
If you have any queries or would like to receive further information on any aspect relating to your equipment,
do not hesitate to contact us.
POINTS TO BEAR IN MIND
DANGER AND WARNING SIGNS

3
1 ºC
2 ºC
1 ºC
2 ºC
1 ºC
2 ºC
1 ºC
2 ºC
DATA PAGE FOR UNIT COMMISSIONING
UNIT:
INSTALLER TEL:INSTALLER:
CONTROL PANEL IDENTIFICATION CODE:
INSTALLATION ADDRESS:
SERIAL Nr:
CHECKS:
DATE OF COMMISSIONING:
SUPPLY VOLTAGE: RATED VOLTAGE OF THE UNIT:
UNIT ON SHOCK ABSORBERS
DRAINAGE WITH TRAP
MAIN POWER SUPPLY CONNECTION
CONTROL PANEL CONNECTION
COMPRESSOR OIL LEVEL INDICATOR
YES NO
DATA INPUT:
COOLING CYCLE
Air intake temperature to the outdoor coil:
Air output temperature to the outdoor coil:
High pressure:
Low pressure:
circuit 1
circuit 2
circuit 1
circuit 2
Air intake temperature to the outdoor coil:
Air output temperature to the outdoor coil:
High pressure:
Low pressure:
circuit 1
circuit 2
circuit 1
circuit 2
HEATING CYCLE
ELECTRIC POWER CONSUMPTION (Amps)
Compressor 1
Compressor 3
Outdoor fan section 1
Outdoor fan section 2
Options installed:
Comments:
Compressor 2 Compressor 2
INSTALLER ADDRESS:
Compressor 1
Compressor 3
Outdoor fan section 1
Outdoor fan section 2

4
C M C 020 S N M 3 M
CMC
CMH
020S
CMC
CMH
025S
CMC
CMH
030S
CMC
CMH
035S
CMC
CMH
040S
CMC
CMH
045D
CMC
CMH
055D
CMC
CMH
070D
CMC
CMH
085D
CMC 4300 5350 6000 7800 9000 5150 6100 7750 9250
CMH 4500 5500 6200 8050 9300 5300 6300 8000 9550
371 407 418 510 533 623 779 824 876
376 412 424 516 539 630 785 831 883
2 2 2 2 2 2 2 3 3
10 10 10 10 10 20 20 20 30
50 50 50 75 75 75 165 165 165
10 10 10 12 16 20 20 24 30
6.5 3 3 5 0 3 3 3 13
6.5 3 8 8 3 6 6 16 21
9.5 8 11 8 6 6 19 24 21
25 25 25 28 28 28 37(1) 37(1) 37(1)
2 2 2 2 2 3 4 4 7
6 6 6 9 9 9 14 14 14
2 6 6 4 4 12 12 8 8
CMC
CMH
020S
CMC
CMH
025S
CMC
CMH
030S
CMC
CMH
035S
CMC
CMH
040S
CMC
CMH
045D
CMC
CMH
055D
CMC
CMH
070D
CMC
CMH
085D
8.25 10.1 11.8 15.5 16.9 20.2 23.5 31 33.8
1.45 1.89 2.69 2.69 2.69 3.63 5.38 5.38 7.26
0.74 1.45 1.45 1.89 2.69 2.69 2.69 3.63 5.06
10.44 13.44 15.94 20.08 22.28 26.52 31.57 40.01 46.12
15 21 22 25.6 31 42 44 51.2 62
2.59 3.45 4.8 4.8 4.8 6.48 9.6 9.6 12.96
1.4 2.59 2.59 3.45 4.8 4.8 4.8 6.48 8.6
18.99 27.04 29.39 33.85 40.6 53.28 58.4 67.28 83.56
89.8 100.4 107.7 142.6 157.5 126.6 136.7 176 200.5
1.- GENERAL CHARACTERISTICS
1.1.- PHYSICAL DATA
Unit
COMPACTAIR C: Cooling only
H: Heat pump
Type of refrigerant
M: R-410A
Approximate cooling
capacity in kW
M: Compact unit
S: One Circuit
D: Two Circuits
- - - Number
of revision
M: 400V/3/50
CMC: Cooling only unit R-410A.
CMH: Heat pump unit R-410A.
(1) Weight of free-cooling and exhaust fan.
UNIDAD MODELOS
Compressor (Nr/Type) 1/Scroll 1/Scroll 1/Scroll 1/Scroll 1/Scroll 2/Scroll 2/Scroll 2/Scroll 2/Scroll
Refrigerant R-410A charge (per circuit)
Net weight
Kg.
CMC cooling only unit
CMH heat pump unit
Air sock control
Electtrical heater
Free-cooling
Hot water coil
Kit fan HP1
Kit fan HP2
Kit fan HP2
Exhaust fan
Low noise
High !ltration level (G4 pre!ltre / F7 !ltration)
Kit long distance
1.2.- ELECTRICAL DATA
ELECTRICAL CONSUMPTION
(*) The units are supplied with refrigerant R-410A indicated above.
UNIT MODELS
Maximum
absorbed
power
(Kw)
Compressor
Fun motor outdoor
Fun motor indoor
Total power
Maximum
current
(A)
Compressor
Fun motor outdoor
Fun motor indoor
Total current
Start up current (A)
WEIGHTS OF THE UNITS AND OPTIONS

5
CIC/H 020S CIC/H 025S CIC/H 030S CIC/H 035S CIC/H 040S
0 0 0 0 0 0 0 0 0 0
0,71 1,19 0,44 0,86 44 0,86 0,8 1,35 0 0
0,71 1,19 1,24 2,21 1,24 2,21 1,74 3,03 0,94 1,68
1,15 2,05 1,24 2,21 2,18 3,89 1,74 3,03 2,37 3,8
0,51 2,6 0,51 2,6 0,51 2,6 1,33 6,8 1,33 6,8
n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a
10 14,3 10 14,3 10 14,3 15 21,5 15 21,5
15 21,5 15 21,5 15 21,5 20 28,6 20 28,6
20 28,6 20 28,6 20 28,6 27 39 27 39
CIC/H 045D CIC/H 055D CIC/H 070D CIC/H 085D CIC/H 100D
0 0 0 0 0 0 0 0 0 0
0,94 1,68 0,94 1,68 1,43 2,12 1,32 2,5 1,32 2,5
2,37 3,8 2,37 3,8 2,75 4,62 3,73 6,7 5,06 8,6
2,37 3,8 3,69 3,69 5,16 8,82 3,73 6,7 5,06 8,6
1,33 6,8 2,65 4,5 2,65 4,5 2,65 4,5 5,3 9
n/a n/a 2,69 4,8 3,63 6,5 3,63 6,5 5,06 8,6
15 21,5 20 28,6 20 28,6 20 28,6 27 39
20 28,6 27 39 27 39 27 39 40 57,8
27 39 40 57,8 40 57,8 40 57,8 50 72,3
1.- GENERAL CHARACTERISTICS
1.2 .- ELECTRICAL DATA
Electrical consumptions to add to the unit indoor and to the set
(*) With option kit low temperature 0ºC. (**) With option kit low temperature -15ºC.
DB: Dry bulb temterature WB: Wet bulb temperature
1.3.- OPERANTING LIMITS
(*) With option kit low temperature -15ºC.
OPERATING LIMITS FOR (HEATING PUMP) UNITS MAXIMUM TEMPERATURE MINIMUM TEMPERATURES
COOLING CYCLE OPERATION
INDOOR TEMPERATURE 32ºC BS / 23ºC WH 21ºC BS / 15ºCWH
OUTDOOR TEMPERATURE 45ºC (020-025-030-045-055)
47ºC (035-040-070-085)
0ºC STANDARD UNITS
-15ºC (*)
HEATING CYCLE OPERATION
INDOOR TEMPERATURE 27ºC DB 15ºC DB
OUTDOOR TEMPERATURE 27ºC (With 20ºC outdoor tem-
perature)
-12ºC (With 20ºC indoor
temperatur)
OPERATING LIMITS FOR (COOLING-ONLY) UNITS MAXIMUM TEMPERATURES MINIMUM TEMPERATURES
COOLING CYCLE OPERATION
INDOOR TEMPERATURE 32ºC BS / 23ºC WH 21ºC BS / 15ºC WH
OUTDOOR TEMPERATURE 45ºC (020-025-030-045-055)
47ºC (035-040-070-085)
+15ºC STANDARD UNITS
0ºC (*) -15ºC (**)
Maximum
absorbed
power (Kw)
Maximum
current (A)
Maximum
absorbed
power (Kw)
Maximum
current (A)
Maximum
absorbed
power (Kw)
Maximum
current (A)
Maximum
absorbed
power (Kw)
Maximum
current (A)
Maximum
absorbed
power (Kw)
Maximum
current (A)
Ventilador interior estándar
Kit de ventilación HP1
Kit de ventilación HP2
Kit de ventilación HP3
Ventilador de extracción
Ventilador de retorno
Batería eléctrica estándar
Batería eléctrica media
Batería eléctrica alta
Maximum
absorbed
power (Kw)
Maximum
current (A)
Maximum
absorbed
power (Kw)
Maximum
current (A)
Maximum
absorbed
power (Kw)
Maximum
current (A)
Maximum
absorbed
power (Kw)
Maximum
current (A)
Maximum
absorbed
power (Kw)
Maximum
current (A)
Ventilador interior estándar
Kit de ventilación HP1
Kit de ventilación HP2
Kit de ventilación HP3
Ventilador de extracción
Ventilador de retorno
Batería eléctrica estándar
Batería eléctrica media
Batería eléctrica alta

6
085D
14000 15125 16250 16725
ASP PI ASP PI ASP PI ASP PI
755 260 3,44 255 3,77 250 4,13
715 230 3,12 225 3,43 215 3,75 212 3,90
675 202 2,82 195 3,11 183 3,41 178 3,55
635 173 2,53 165 2,80 153 3,09 145 3,22
595 145 2,27 135 2,52 120 2,79 115 2,91
055D
9950 10825 11700 12850
ASP PI ASP PI ASP PI ASP PI
755 255 2,37 257 2,56 260 2,77 260 3,05
715 230 2,11 232 2,30 234 2,48 233 2,75
675 207 1,88 208 2,05 210 2,23 207 2,48
635 184 1,67 184 1,82 184 1,99 180 2,22
595 162 1,47 162 1,61 160 1,77 155 1,98
070D
12450 13550 14650 15090
ASP PI ASP PI ASP PI ASP PI
755 260 2,93 260 3,22 258 3,52 255 3,65
715 235 2,64 233 2,91 228 3,20 225 3,32
675 208 2,37 205 2,62 198 2,90 195 3,00
635 182 2,12 176 2,36 168 2,61 165 2,72
595 157 1,89 150 2,11 140 2,35 135 2,44
ASP (Pa):
PI (Kw):
020S
rpm 824 788 753 717 682
m3/h
3150 167 149 132 116 101
3425 162 143 127 109 93
3700 155 138 120 103 85
4100 •127 108 90 72
025S
rpm 824 788 753 717 682
m3/h
4250 141 123 103 84 66
4625 129 109 89 69 49
5000 115 92 71 50 28
5500 89 66 42 19 n/a
030S
rpm 915 876 836 797 757
m3/h
4650 173 149 125 103 80
5050 158 133 109 84 60
5450 141 115 89 63 38
6000 •84 56 28 0
035S
r pm 735 704 672 640 609
m3/h
6200 164 142 119 98 77
6650 153 130 106 83 61
7100 139 114 89 66 42
8050 102 75 48 22 n/a
040S
rpm 837 792 748 704 659
m3/h
6950 213 178 143 109 75
7550 196 158 122 86 50
8150 175 136 97 58 21
9050 136 94 53 10 n/a
045D
rpm 937 888 838 788 738
m3/h
7950 272 227 183 140 97
8675 249 201 155 109 63
9400 •171 121 72 23
9750 • • 103 51 1
055D
rpm 837 792 748 704 659
m3/h
9950 206 177 148 122 96
10825 195 166 138 110 83
11700 185 154 125 97 68
12850 136 105 75 45
070D
rpm 937 888 838 788 738
m3/h
12450 237 200 163 128 95
13550 •183 145 109 73
14650 • • 124 85 48
15090 • • 115 75 36
085D
rpm 937 888 838 788 738
m3/h
14000 202 163 125 87 51
15125 182 142 102 62 23
16250 160 117 75 34 n/a
16725 149 105 63 20 n/a
100D
rpm 750 710 670 630 591
m3/h
17350 237 202 167 133 101
18875 223 185 149 115 81
20400 •168 131 94 59
22450 • • 100 63 25
1.- GENERAL CHARACTERISTICS
Static pressure available
Absorved power
NOTA: The unit leaves factory with the pulley fit to two
open turns
1.4.- RETURN FAN PERFORMANCES
1.5.- INDOOR FAN PERFORMANCES. STANDARD
Air flow (m3/h)
Return fan
(RPM)
Closed pulley
Pulley
position
1 turn
2 turns
3 vueltas
4 vueltas
Air flow (m3/h)
Return fan
(RPM)
Closed pulley
Pulley
position
1 turn
2 turns
3 vueltas
4 vueltas
Air flow (m3/h)
Return fan
(RPM)
Closed pulley
Pulley
position
1 turn
2 turns
3 vueltas
4 vueltas
CLOSED
PULLEY 1 TURN 2 TURNS 3 TURNS 4 TURNS
Available static pressure Pa.
Available static pressure Pa.
Available static pressure Pa.
Available static pressure Pa.
Available static pressure Pa.
CLOSED
PULLEY 1 TURN 2 TURNS 3 TURNS 4 TURNS
Available static pressure Pa.
Available static pressure Pa.
Available static pressure Pa.
Available static pressure Pa.
Available static pressure Pa.

7
020S
rpm 1098 1051 1003 956 909
m3/h
3150 324 294 264 237 211
3425 321 289 261 233 207
3700 317 285 257 229 202
4100 310 279 249 222 193
025S
rpm 1098 1051 1003 956 909
m3/h
4250 308 276 246 218 190
4625 301 269 239 209 180
5000 292 260 228 197 167
5500 278 244 211 178 146
030S
rpm 1098 1051 1003 956 909
m3/h
4650 290 259 228 198 169
5050 280 248 215 184 154
5450 269 235 201 169 138
6000 249 213 178 143 109
035S
r pm 937 888 838 788 738
m3/h
6200 321 281 241 203 167
6650 313 272 232 193 155
7100 306 262 221 181 142
8050 282 236 191 148 105
040S
rpm 937 888 838 788 738
m3/h
6950 298 255 214 174 135
7550 283 240 197 155 113
8150 267 221 176 132 88
9050 •186 138 90 43
045D
rpm 1041 986 931 876 820
m3/h
7950 371 318 267 217 168
8675 353 298 244 190 139
9400 330 271 215 158 103
9750 316 258 199 141 84
055D
rpm 1041 986 931 876 820
m3/h
9950 357 313 272 232 194
10825 349 304 263 223 185
11700 •295 253 213 173
12850 • • 239 196 156
070D
rpm 1041 986 931 876 820
m3/h
12450 321 276 232 191 151
13550 307 262 217 174 133
14650 291 244 199 154 110
15090 •236 190 145 101
085D
rpm 1041 986 931 876 820
m3/h
14000 288 242 197 155 112
15125 272 223 177 132 88
16250 253 203 154 107 60
16725 244 193 144 95 48
100D
rpm 837 792 748 704 659
m3/h
17350 323 279 236 196 157
18875 310 264 221 180 140
20400 296 248 204 162 121
22450 • • 178 133 90
020S
rpm 1177 1126 1075 1024 974
m3/h
3150
377 342 309 278 247
3425
373 338 306 273 243
3700
369 334 302 269 239
4100
364 329 295 263 232
025S
rpm 1318 1261 1204 1147 1091
m3/h
4250
466 423 381 341 303
4625
461 418 375 335 295
5000 •
412 368 327 287
5500 • • •
314 273
030S
rpm 1339 1268 1197 876 1055
m3/h
4650
468 413 359 309 261
5050 462 405 352 299 250
5450 454 396 341 289 238
600 441 383 325 270 216
035S
rpm 1103 1044 986 927 869
m3/h
6200
469 414 362 313 266
6650 463 408 356 305 257
7100 458 402 348 297 247
8050 442 383 327 272 220
1.- GENERAL CHARACTERISTICS
1.5.- INDOOR FAN PERFORMANCES
CLOSED
PULLEY 1 TURN 2 TURNS 3 TURNS 4 TURNS
Available static pressure Pa.
Available static pressure Pa.
Available static pressure Pa.
Available static pressure Pa.
Available static pressure Pa.
CLOSED
PULLEY 1 TURN 2 TURNS 3 TURNS 4 TURNS
Available static pressure Pa.
Available static pressure Pa.
Available static pressure Pa.
Available static pressure Pa.
Available static pressure Pa.
VENTILATION HP1
VENTILATION HP2
CLOSED
PULLEY 1 TURN 2 TURNS 3 TURNS 4 TURNS
Available static pressure Pa.
Available static pressure Pa.
CLOSED
PULLEY 1 TURN 2 TURNS 3 TURNS 4 TURNS
Available static pressure Pa.
Available static pressure Pa.
(●) WRONG STATUS ON ACCOUNT OF MOTOR POWER LIMIT. NOTE: With low distance option it is not suitable unit working below
nominal air flow.
NOMINAL FACTORY SETTING.

8
040S
rpm 1103 1044 986 927 869
m3/h
6950 449 393 340 289 239
7550 440 382 327 275 223
8150 427 370 312 257 203
9050 405 344 284 225 168
045D
rpm 1103 1044 986 927 869
m3/h
7950 432 373 317 263 211
8675 415 355 296 240 184
9400 395 332 271 211 152
9750 384 320 256 195 134
055D
rpm 1172 1109 1047 985 923
m3/h
9950 514 456 399 346 296
10825 508 448 391 338 286
11700 500 440 383 328 275
12850 • • 369 313 258
070D
rpm 1172 1109 1047 985 923
m3/h
12450 371 421 363 307 252
13550 470 408 348 289 233
14650 457 391 329 268 208
15090 450 383 320 258 196
085D
rpm 1172 1109 1047 985 923
m3/h
14000 452 390 328 268 211
15125 438 371 307 245 183
16250 418 349 282 215 150
16725 408 338 270 202 135
100D
rpm 937 888 838 788 738
m3/h
8675 477 419 364 312 262
9437 469 410 354 299 248
10200 458 398 341 284 232
11225 440 379 319 261 206
020S
rpm 1318 1261 1204 1147 1091
m3/h
3150 483 438 397 357 319
3425 478 434 393 353 316
3700 474 430 389 349 312
4100 469 425 383 343 305
025S
rpm 1500 1420 1340 1261 1181
m3/h
4250 •550 485 423 365
4625 •545 480 418 359
5000 •541 475 412 352
5500 •532 466 402 339
030S
rpm 1500 1420 1340 1261 1181
m3/h
4650 •535 469 408 349
5050 •529 463 399 340
5450 •521 455 391 330
6000 •511 443 376 313
035S
r pm 1250 1183 1117 1051 985
m3/h
6200 •548 483 421 362
6650 •545 478 415 355
7100 •539 472 408 347
8050 •526 456 390 326
040S
rpm 1250 1183 1117 1051 985
m3/h
6950 602 530 463 399 339
7550 594 522 453 388 326
8150 586 512 442 376 311
9050 570 493 421 351 283
045D
rpm 1250 1183 1117 1051 985
m3/h
7950 589 515 446 381 317
8675 578 501 430 363 295
9400 562 485 411 340 270
9750 553 475 400 326 255
055D
rpm 1339 1268 1197 1126 1055
m3/h
9950 689 612 539 471 406
10825 683 606 533 464 398
11700 677 599 525 457 390
12850 670 590 515 444 376
070D
rpm 1339 1268 1197 1126 1055
m3/h
12450 662 582 508 437 370
13550 652 573 497 424 354
14650 641 561 484 408 336
15090 636 555 477 400 328
085D
rpm 1339 1268 1197 1126 1055
m3/h
14000 636 557 478 406 336
15125 623 542 464 387 315
16250 609 526 445 367 289
16725 602 518 436 357 279
100D
rpm 1041 986 931 876 820
m3/h
8675 606 537 469 407 346
9437 599 529 461 396 334
10200 592 519 451 384 321
11225 •504 433 364 299
1.- GENERAL CHARACTERISTICS
1.5.- INDOOR FAN PERFORMANCES. VENTILATION HP2
(●) WRONG STATUS ON ACCOUNT OF MOTOR POWER LIMIT. NOTE: With low distance option it is not suitable unit working below
nominal air flow.
NOMINAL FACTORY SETTING.
CLOSED
PULLEY 1 TURN 2 TURNS 3 TURNS 4 TURNS
Available static pressure Pa.
Available static pressure Pa.
Available static pressure Pa.
CLOSED
PULLEY 1 TURN 2 TURNS 3 TURNS 4 TURNS
Available static pressure Pa.
Available static pressure Pa.
Available static pressure Pa.
CLOSED
PULLEY 1 TURN 2 TURNS 3 TURNS 4 TURNS
Available static pressure Pa.
Available static pressure Pa.
Available static pressure Pa.
Available static pressure Pa.
Available static pressure Pa.
CLOSED
PULLEY 1 TURN 2 TURNS 3 TURNS 4 TURNS
Available static pressure Pa.
Available static pressure Pa.
Available static pressure Pa.
Available static pressure Pa.
Available static pressure Pa.
VENTILATION HP3

9
020S 025S 030S
3150 3425 3700 4100 4250 4625 5000 5500 4650 5050 5450 6000
13 17 20 25 24 31 37 45 28 37 43 54
85 93 102 115 120 133 146 165 133 148 163 184
15 17 20 23 25 28 32 38 29 33 37 44
035S 040S 045D
6200 6650 7100 8050 6950 7550 8150 9050 7950 8675 9400 9750
26 30 34 43 33 38 44 52 42 48 55 58
128 140 152 178 148 164 181 208 175 197 219 230
25 29 32 39 31 35 40 47 38 44 50 54
055D 070D 085D
9950 10825 11700 12850 12450 13550 14650 15090 14000 15125 16250 16725
11 13 16 19 18 21 24 26 22 26 30 32
123 136 150 169 162 181 200 208 188 209 230 239
24 27 31 36 34 39 44 47 41 47 53 55
1.- GENERAL CHARACTERISTICS
1.6.- OPTION PRESSURE DROP (Pa)
Unit models
Airflow (m3/h)
Options
Free-cooling
High efficiency filter
Hot water coil
Unit models
Caudal de aire (m3/h)
Options
Free-cooling
High efficiency filter
Hot water coil
Unit models
Airflow (m3/h)
Options
Free-cooling
High efficiency filter
Hot water coil