Lenovo ThinkPad 43N3222 User manual

ThinkPad DVD Burner Ultrabay Serial
ATA Drive User Guide

ThinkPad DVD Burner Ultrabay Serial
ATA Drive User Guide

ATTENTION
Before installing this product, read the ThinkPad System Safety Booklet.
Note
Be sure to retain your proof of purchase, it might be required to receive warranty services. See Appendix B, “Lenovo
Limited Warranty,” on page 15.
First Edition (June 2008)
©Copyright Lenovo 2008.
Portions ©Copyright International Business Machines Corporation 2005.
All rights reserved.
LENOVO products, data, computer software, and services have been developed exclusively at private expense and
are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted
rights to use, reproduction and disclosure.
LIMITED AND RESTRICTED RIGHTS NOTICE: If products, data, computer software, or services are delivered
pursuant aGeneral Services Administration ″GSA″contract, use, reproduction, or disclosure is subject to restrictions
set forth in Contract No. GS-35F-05925.

Contents
Safety information ..........v
General safety guidelines....... vii
Service ................ vii
Power cords and power adapters ....... vii
Extension cords and related devices ...... vii
Plugs and outlets ............ viii
Batteries ............... viii
Heat and product ventilation ........ viii
Chapter 1. About the ThinkPad DVD
Burner Ultrabay Serial ATA Drive ....1
Product description ............1
Software description ............1
Installation requirements ..........2
Installing the drive ............2
Locating the drive controls .........2
Chapter 2. Using the ThinkPad DVD
Burner Ultrabay Serial ATA Drive ....3
Before you begin .............3
Caring for the drive ............3
Loading adisc..............3
Securing adisc in avertically mounted drive ...4
Manually ejecting adisc ..........4
Using media ..............4
Handling and caring for adisc .......4
Using DVD-RAM media .........5
Using CDs and DVDs ..........6
Using CD-Rs and CD-RWs ........6
Using DVD-Rs and DVD-RWs .......6
Installing software ............7
Using Intervideo WinDVD player .......7
Using WinDVD ............7
Changing the DVD region code .......8
Using Drag-to-Disc (DLA) ..........8
Using Creator Business Edition ........9
Copying and imaging discs ........9
Using MyDVD .............10
Chapter 3. Troubleshooting ......11
Appendix A. Service and Support ...13
Registering your option ..........13
Online technical support ..........13
Telephone technical support .........13
Appendix B. Lenovo Limited Warranty 15
Warranty information ...........18
Suplemento de Garantía para México......19
Appendix C. Notices .........21
Recycling information ...........22
Trademarks ..............22
Appendix D. Electronic emission
notices...............23
Federal Communications Commission (FCC)
Declaration of Conformity .........23
Appendix E. China ROHS .......25
©Lenovo 2008. Portions ©IBM Corp. 2005. iii

iv ThinkPad DVD Burner Ultrabay Serial ATA User Guide

Safety information
Before installing this product, read the Safety Information.
Antes de instalar este produto, leia as Informações de Segurança.
Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.
Læs sikkerhedsforskrifterne, før du installerer dette produkt.
Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information.
Avant d’installer ce produit, lisez les consignes de sécurité.
Vor der Installation dieses Produkts die Sicherheitshinweise lesen.
Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.
Lees voordat udit product installeert eerst de veiligheidsvoorschriften.
Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet.
Antes de instalar este produto, leia as Informações sobre Segurança.
Antes de instalar este producto lea la información de seguridad.
©Lenovo 2008. Portions ©IBM Corp. 2005. v

Läs säkerhetsinformationen innan du installerar den här produkten.
vi ThinkPad DVD Burner Ultrabay Serial ATA User Guide

General safety guidelines
Always observe the following precautions to reduce the risk of injury and property damage.
Service
Do not attempt to service aproduct yourself unless instructed to do so by the Customer Support Center.
Use only aservice provider who is approved to repair your particular product.
Note: Some parts can be upgraded or replaced by the customer. These parts are referred to as Customer
Replaceable Units, or CRUs. Lenovo expressly identifies CRUs as such, and provides
documentation with instructions when it is appropriate for customers to replace those parts. You
must closely follow all instructions when performing such replacements. The Off state of apower
indicator does not necessarily mean that voltage levels inside aproduct are zero. Always make
sure that the power is turned off and that the product is unplugged from any power source before
you attempt the replacement. If you have any questions or concerns, contact the Customer Support
Center.
Power cords and power adapters
Use only the power cords and power adapters supplied by the product manufacturer.
Never wrap apower cord around the power adapter or other object. Doing so can stress the cord in ways
that can cause the cord to fray, crack or crimp. This can present asafety hazard.
Always route power cords so that they will not be walked on, tripped over, or pinched by objects.
Protect the cord and power adapters from liquids. For instance, do not leave your cord or power adapter
near sinks, tubs, toilets, or on floors that are cleaned with liquid cleansers. Liquids can cause ashort
circuit, particularly if the cord or power adapter has been stressed by misuse. Liquids can also cause
gradual corrosion of the power cord terminals and/or the connector terminals on the adapter which can
eventually result in overheating.
Always connect power cords and signal cables in the correct order and ensure that all power cord
connectors are securely and completely plugged into receptacles.
Do not use any power adapter that shows corrosion at the ac input pins and/or shows signs of
overheating (such as deformed plastic) at the ac input or anywhere on the power adapter.
Do not use any power cords where the electrical contacts on either end show signs of corrosion or
overheating or where the power cord appears to have been damaged in any way.
Extension cords and related devices
Ensure that extension cords, surge protectors, uninterruptible power supplies, and power strips that you
use are rated to handle the electrical requirements of the product. Never overload these devices. If power
strips are used, the load should not exceed the power strip input rating. Consult an electrician for more
information if you have questions about power loads, power requirements, and input ratings.
©Lenovo 2008. Portions ©IBM Corp. 2005. vii

Plugs and outlets
If areceptacle (power outlet) that you intend to use with your computer equipment appears to be
damaged or corroded, do not use the outlet until it is replaced by aqualified electrician.
Do not bend or modify the plug. If the plug is damaged, contact the manufacturer to obtain a
replacement.
Some products are equipped with athree-pronged plug. This plug fits only into agrounded electrical
outlet. This is asafety feature. Do not defeat this safety feature by trying to insert it into anon-grounded
outlet. If you cannot insert the plug into the outlet, contact an electrician for an approved outlet adapter
or to replace the outlet with one that enables this safety feature. Never overload an electrical outlet. The
overall system load should not exceed 80 percent of the branch circuit rating. Consult an electrician for
more information if you have questions about power loads and branch circuit ratings.
Be sure that the power outlet you are using is properly wired, easily accessible, and located close to the
equipment. Do not fully extend power cords in away that will stress the cords.
Connect and disconnect the equipment from the electrical outlet carefully.
Batteries
All personal computers manufactured by Lenovo contain anon-rechargeable coin cell battery to provide
power to the system clock. In addition many mobile products such as notebook PCs utilize arechargeable
battery pack to provide system power when in portable mode. Batteries supplied by Lenovo for use with
your product have been tested for compatibility and should only be replaced with Lenovo approved
parts.
Never attempt to open or service any battery. Do not crush, puncture, or incinerate batteries or short
circuit the metal contacts. Do not expose the battery to water or other liquids. Only recharge the battery
pack strictly according to instructions included in the product documentation.
Battery abuse or mishandling can cause the battery to overheat, which can cause gasses or flame to
“vent” from the battery pack or coin cell. If your battery is damaged, or if you notice any discharge from
your battery or the buildup of foreign materials on the battery leads, stop using the battery and obtain a
replacement from the battery manufacturer.
Batteries can degrade when they are left unused for long periods of time. For some rechargeable batteries
(particularly Lithium Ion batteries), leaving abattery unused in adischarged state could increase the risk
of abattery short circuit, which could shorten the life of the battery and can also pose asafety hazard. Do
not let rechargeable Lithium-Ion batteries completely discharge or store these batteries in adischarged
state.
Heat and product ventilation
Computers, AC power adapters, and many accessories can generate heat when turned on and when
batteries are charging. Always follow these basic precautions:
vDo not leave your computer, AC power adapter, or accessories in contact with your lap or any part of
your body for an extended period when the products are functioning or when the battery is charging.
Your computer, AC power adapter, and many accessories produce some heat during normal operation.
Extended contact with the body could cause discomfort or, potentially, askin burn.
vDo not charge the battery or operate your computer, AC power adapter, or accessories near flammable
materials or in explosive environments.
viii ThinkPad DVD Burner Ultrabay Serial ATA User Guide

vVentilation slots, fans, and heat sinks are provided with the product for safety, comfort, and reliable
operation. These features might inadvertently become blocked by placing the product on abed, sofa,
carpet, or other flexible surface. Never block, cover, or disable these features.
General safety guidelines ix

xThinkPad DVD Burner Ultrabay Serial ATA User Guide

Chapter 1. About the ThinkPad DVD Burner Ultrabay Serial
ATA Drive
This manual provides information on registering, installing, and using the ThinkPad®DVD Burner
Ultrabay™Serial ATA Drive, and is available on the Software and User Guide CD.
The appendices of this guide contain warranty information and legal notices.
Product description
Your drive is compatible with the DVD-Multi Recorder specification, and can record as well as read
DVD-RAM, DVD-RW, and DVD-R (for General, 650 nm) media. Your drive can also record CD-R,
CD-RW, and High-Speed CD-RW media, and uses buffer underrun prevention technology for reliable CD
burning. Your CD/DVD Burner can read many other formats including DVD+R, DVD+RW, DVD Video,
Video CD, audio CD, multiple-session, extended architecture (XA) CDs, and Kodak Photo CD. (Some
DVD+R and DVD+RW media brands may not be compatible.) The drive is designed for installation in
your Ultrabay Serial ATA Drive Bay or Ultrabay Enhanced Drive Bay.
In addition to this Software and User Guide CD,your option package includes the following:
vThinkPad DVD Burner Ultrabay Serial ATA Drive
vCarrying case
vQuick Reference Guide
vLaser Safety Guide
Contact your place of purchase if an item is missing or damaged. Be sure to retain your proof of
purchase. It might be required to receive warranty service. See Appendix A, “Service and Support,” on
page 13 for technical support information.
Software description
Your Software and User Guide CD contains the following software:
vMyDVD
This software enables you to create DVD-RAM, DVD-RW, DVD-R, DVD+RW, and DVD+R media that
can be played in most stand-alone DVD players. You can add your own videos and create custom
menus for DVD videos that you create. You can also use this software to edit and modify your own
video assets prior to recording. If you have an analog, USB, or IEEE 1394 capture device installed in
your computer, you can use this software to record video from acamera.
vDrag-to-Disc (DLA)
This software enables you to write directly to CD and DVD media using the drive letter as you would
if you were writing to adisc. You can also format DVD-RAM, DVD-RW, DVD-R, DVD-R DL, DVD+R
DL, DVD+RW, and DVD+R media. With DLA, you can drag-and-drop files, create new directories, or
save files from almost any application directly to your CD/DVD Burner. Drag-to-Disc is installed as
part of the Creator Business Edition.
vUDF Reader
This software enables you to install software for reading DVD-RAM, DVD-RW, DVD+RW, DVD-R DL,
DVD+R DL, and CD-RW media on other computers with DVD drives.
vCreator Business Edition
This software enables you to copy CDs, create audio CDs, create MP3 CDs, and author data CDs. You
can also use Creator Business Edition to write data to DVD-RAM, DVD-RW, DVD-R, DVD-R DL,
DVD+RW, DVD+R DL, and DVD+R discs for use in other computers or compatible consumer
©Lenovo 2008. Portions ©IBM Corp. 2005. 1

electronics products. You can also create bootable CDs and save CD images for later recording. With
the Express Labeller that is included in the Creator Business Editions, you can print paper labels or
label LightScribe discs.
vIntervideo WinDVD
This software enables you to play back DVD videos on your computer or to play video files from your
hard disk drive.
Note: Some graphics adapters such as the ATI FireGL™,Intergraph, and 3DLABS do not support DVD
video playback.
Installation requirements
To install the ThinkPad DVD Burner Ultrabay Serial ATA Drive, your ThinkPad computer must meet the
following requirements:
vAThinkPad system with an Ultrabay Serial ATA Drive Bay or Ultrabay Enhanced Bay
vAThinkPad X200 Ultrabase Dock or Dock II
vMicrosoft®Windows 2000, Microsoft Windows®XP, or Microsoft Windows Vista®operating system
Note: Lenovo offers limited support for computers with Microsoft Windows 95, Windows 98, or
Microsoft Windows Millennium Edition (Me) desktop operating systems.
Installing the drive
Your ThinkPad computer includes ahelp system, Access ThinkPad, which provides drive installation
instructions specific to your computer. To correctly install the drive into the Ultrabay Serial ATA Drive
Bay or Ultrabay Enhanced Bay, follow the instructions provided in the Access ThinkPad help system.
Locating the drive controls
The following diagram shows the location of the controls on the front of the drive.
1 Power light: This light is visible when the drive is in use.
2 Eject button: Press this button to eject aDVD or CD.
3 Manual eject hole: Use this emergency release to eject aDVD or CD when the Eject button does not
work. For more information on manually ejecting aDVD or CD, see “Manually ejecting adisc” on page
4.
2ThinkPad DVD Burner Ultrabay Serial ATA User Guide

Chapter 2. Using the ThinkPad DVD Burner Ultrabay Serial
ATA Drive
This section provides information on how to handle, load, and care for DVDs and CDs, and how to care
for your drive.
Before you begin
For best results, review the following guidelines before using the drive:
vDo not move your ThinkPad computer while formatting or writing to adisc as this might cause data
errors. Also, minimize typing while formatting or writing to adisc, as this might also cause data errors.
vKeep your ThinkPad computer on aflat surface when writing to adisc.
vMake sure your ThinkPad computer is plugged into an AC outlet when using the drive. The disc
might be damaged if the battery runs out while writing to adisc.
vTurn screen savers off. Using ascreen saver might interrupt the formatting and writing process.
vDo not put your ThinkPad computer into hibernation or suspension mode while writing to adisc.
Note: The read and write results of the drive depend upon the quality and characteristics of the DVD or
CD media used.
Caring for the drive
To protect your drive during operation, follow the precautions as following:
vRemove the disc from the drive before moving the drive.
vDo not insert foreign objects into the drive.
vDo not stack objects on the drive.
vDo not remove the drive cover or attempt to service the drive.
vDo not operate the drive under any of these conditions:
–High temperature, high humidity, or direct sunlight
–Excessive vibration, sudden shock, or inclined surface
–Excessive dust
Loading adisc
1. Press the Eject button. The tray slides out of the drive.
2. Place adisc in the tray with the label facing up.
©Lenovo 2008. Portions ©IBM Corp. 2005. 3

3. Close the tray by gently pushing the tray in until it latches.
Attention: Do not use force or insert foreign objects to open the tray. If your tray does not open when you press the
Eject button, see “Manually ejecting adisc” for more information.
Securing adisc in avertically mounted drive
The drive has four retainers molded into the loading tray for vertical mounting operation. To insert a
disc, place it in the lower two retainers before closing the tray. To remove adisc, open the tray and lift
the disc from the two lower retainers.
Manually ejecting adisc
If you press the Eject button and the tray does not slide out, turn off the computer and straighten alarge
paper clip to form atool, as shown in the figure below. The straightened end must extend at least 45 mm
(1.8 inch). Insert the extended end into the manual-eject hole on the front of the drive. Push the paper
clip until the tray opens. Gently pull out the tray until you can remove the disc.
45 mm
1.8 in
Using media
This section contains information on using media.
Handling and caring for adisc
Carefully handle and clean discs, especially writable media types such as CD-R and CD-RW discs, so that
they remain readable. You can prolong the life of your discs by following the precautions below:
vAlways store discs in their original packaging.
vAlways store discs out of direct sunlight.
vAlways store discs away from direct heat sources.
vRemove discs from the computer when not in use.
vCheck discs for cracks before each use.
IMPORTANT:Do not use discs that are cracked.
vDo not force discs into the computer or packaging.
vDo not bend or flex discs.
vDo not use commercial cleaners to clean discs.
vDo not write on the surface of discs.
vHandle discs by the edges or the center hole.
vDo not touch the surface of discs.
vTo remove dust or fingerprints, wipe discs from the center to the edge with asoft, lint-free cloth.
Attention: Wiping adisc using acircular motion can cause data loss.
4ThinkPad DVD Burner Ultrabay Serial ATA User Guide

Your drive can use many different types of media. Not all media are used in the same way. The following
sections describe what you can do with the different media types.
Using DVD-RAM media
DVD-RAM media are available in bare-disc or cartridge form. To use cartridge media in your drive, you
must first remove the disc from the cartridge.
Removing the disc from the cartridge
2a
3a
Using the tip of aball point pen, push and break the lock pin tab 1.To remove the disc, use aball
point pen to push down on the cartridge lid lock 2and pull the cartridge lid out 3.When the
cartridge lid is open, the disc can be removed.
Note: The cartridge lid lock and the cartridge lid tab are located on the side of some cartridges, as shown
in 2aand 3aabove.
Attention: Do not touch the recording area of the disc when handling bare media.
Returning the disc to the cartridge
Chapter 2. Using the ThinkPad DVD Burner Ultrabay Serial ATA Drive 5

To return the disc to the cartridge, align the label side of the disc 1with the DVD-RAM cartridge label
side. Insert the disc and close the cartridge lid 2.Aclicking sound will occur when the lid closes.
Precautions for handling
Be careful when handling the removed disc. Debris, dust particles, fingerprints, smears, or scratches may
impair recording and playback of the media. To clean dust or other debris, use aCD Cleaning Kit. Use a
soft, dry cloth to clean the disc. Do not use solvents to clean the disc surface. When labeling adisc, write
only on the printed label side or the cartridge using asoft felt-tip marker. Keep out of direct sunlight,
high temperatures, and humidity. Do not attach labels to either side of the disc.
Using single and double-sided DVD-RAM media
DVD-RAM media are available in single-sided and double-sided versions.
The 2.6 GB and 4.7 GB versions are single-sided. The 9.4 GB version is double-sided. To access the data
on both sides of the media, you must remove the media from the drive, turn it over, and re-insert it into
the drive.
Using CDs and DVDs
Complete these steps to read adata disc:
1. Turn on the computer.
2. Press the Open or Close button on the front of the drive.
3. Insert adisc or cartridge in the tray with the label facing up.
4. Close the tray by pressing the Open or Close button or by gently pushing in the loading tray.
Attention: Do not use force or insert foreign objects to open the loading tray.
5. Wait until the drive busy indicator turns off, and then double-click My Computer.
6. Double-click the CD-ROM or DVD-RAM/DVD-R/DVD-RW icon.
Using CD-Rs and CD-RWs
The drive can write to both CD-R and CD-RW discs. CD-R discs cannot be erased, but can be used with
standard CD-ROM drives and CD players.
You can use CD-R discs to record audio tracks, store data, archive files, and copy files from another CD.
CD-RW discs can be erased and rewritten, but can be used only with newer CD-RW-compatible CD-ROM
and DVD-ROM drives. You can use CD-RW discs to back up, store, and update files or to copy files from
another CD.
Notes:
1. CD-R discs are playable on audio CD players. CD-RW discs are not playable on most audio CD
players.
2. The software included with this drive does not enable the drive CD-recording capabilities with DOS,
Windows 3.x, or OS/2®operating systems.
For more information on using the software, refer to “Using Drag-to-Disc (DLA)” on page 8and “Using
Creator Business Edition” on page 9.
Using DVD-Rs and DVD-RWs
The drive can write to both DVD-R and DVD-RW discs. DVD-R discs cannot be erased, but can be used
with standard DVD-ROM drives and DVD players.
You can use DVD-R discs to record audio tracks, store data, archive files, and copy files from another
DVD.
6ThinkPad DVD Burner Ultrabay Serial ATA User Guide

DVD-RW discs can be erased and rewritten, but can be used only with newer MR- and
DVD-RW-compatible DVD-ROM drives. You can use DVD-RW discs to back up, store, and update files or
to copy files from another DVD.
For more information on using the software, refer to the Multimedia Center for Think Offerings and DLA
help information on the Software and User Guide CD.
Installing software
After you have connected the Multi-Burner Drive, you can install application software from the Software
User Guide CD.There are four software packages on the CD as following:
vCreator Business Edition and MyDVD:Install this software to record CDs, edit videos, and author
DVD videos
vWinDVD:Install this software to play DVD videos
vDrag-to-Disc:Install this software if you want to use your Multi-Burner Drive as afloppy drive
vUDF Reader:Install this software on your Windows operating system computers to read discs created
with Drag-to-Disc.
Note:
vCreator Business Edition and MyDVD are installed and uninstalled together.
vDo not install both Drag-to-Disc and UDF Reader on the same computer.
vDLA and UDF Reader have both 32 and 64 bit versions. Install the one that matches your
operating system.
Complete these steps to install software:
1. Insert the Software and User Guide CD into the CD/DVD Burner drive.
2. If the CD automatically starts, continue with Step 5.
3. If the CD does not automatically start, click Start,and then click Run.
4. In the Run box type x:\launch.bat,where xis the drive letter of the ThinkPad DVD Burner Ultrabay
Serial ATA drive.
5. If you get awarning from Internet Explorer®about malicious scripts, right-click the warning bar, and
select Allow Blocked Content.
6. Select Software from the left-hand navigation bar.
7. Check the boxes by the software that you wish to install.
8. Click Go.The software you selected will install silently.
9. Restart the computer after the completion message.
Note: If the software fails to install silently, you can select the individual packages for each software from
the bottom line of the installation page.
Using Intervideo WinDVD player
This section describes how to use and customize the Intervideo WinDVD player. You can find current
information on Intervideo WinDVD player in the readme file on the Software and User Guide CD.
Using WinDVD
When you insert aDVD video disc into the drive, the Intervideo WinDVD player will automatically start
and begin to play the video disc. If the DVD disc contains both video and program content, the program
content will automatically play.
Chapter 2. Using the ThinkPad DVD Burner Ultrabay Serial ATA Drive 7

To view the video content of avideo or DVD disc, go to the Start menu, launch WinDVD,and click
Play.
With Microsoft Windows XP, you can also play DVD Video content by using the Windows Media Player
application.
Changing the DVD region code
Regionalization and Copy Protection (the DVD region code) uses the content scramble system (CSS)
standard to prevent unauthorized duplication of the intellectual property rights distributed on DVDs. It
was originally requested by the Motion Picture Association of America (MPAA) to address video piracy,
but is applicable to any content. CSS works by inhibiting the transmission of unencrypted data without
proper authorization. Playback systems must license CSS to decode the encrypted data.
The CSS specification divides the world into seven unique regions. Content designated for one region
cannot be read by playback systems in another region. While CSS is used to prevent digital copies of the
DVD content, another technology devised by Macrovision is used to prevent analog copies of the DVD
content. The Macrovision standard is ascrambling system widely used by the movie industry to prevent
unauthorized duplication of video content using commercial VCRs. DVD playback systems must support
both CSS and Macrovision copy protection standards.
The first time that you insert aDVD video disc into the drive, you will be prompted to set the region. If
you relocate to adifferent region of the world, you can use the DVD player software to change the region
code.
Note: You can change the DVD region code only five times. After you make five region code changes,
the drive can play only MPEG-2 video titles that are associated with the fifth region code that you
set.
To change the region code, complete these steps:
1. Turn on your computer and start your operating system.
2. Click Start.
3. Select Programs.
4. Click Intervideo WinDVD.
5. Click Intervideo WinDVD.
6. Click the Properties icon to open the Properties window.
7. Click the General Properties tab.
8. Insert asingle region DVD of the new region.
9. Select the correct region code for your country.
10. Click OK.
Using Drag-to-Disc (DLA)
Drag-to-Disc (DLA) is provided so that you can write data to DVD-RAM, DVD-RW, DVD-R, DVD+RW,
DVD+R, CD-R, and CD-RW media. DVD-RAM, DVD-RW, DVD+RW, and CD-RW media can be written
to many times, while DVD-R, DVD+R, and CD-R media can only be formatted and written to once.
To format and write to DVD-RAM, DVD-RW, DVD-R, DVD+RW, DVD+R, CD-R, or CD-RW media:
1. Insert adisc into the drive.
2. Double-click My Computer.Right-click the CD/DVD Burner drive letter.
3. Click Format.Formatting aDVD can take up to 90 minutes.
4. After formatting is complete, you can drag-and-drop files to the CD/DVD Burner drive icon, or you
can move files in Windows Explorer.
To make CD-R and DVD-R media compatible in other computers, complete these steps:
1. Double-click My Computer.Right-click the CD/DVD Burner drive letter.
8ThinkPad DVD Burner Ultrabay Serial ATA User Guide