LEVIOR 48010 User manual

LEVIOR s.r.o.
Troubky č. p. 900
751 02 Troubky
CZ 61973939
INSTRUCTIONS
FOR INFLATING GUNS
(48010)
The first use of the device within the meaning of this legal step instructions, which the user
confirms their free will, that this instruction properly studied, fully understand its meaning
and familiar with all the risks.
WARNING:
Do not attempt to specify (or use) the device before you are familiar with the entire instruction
manual.
Attention should be given particular instructions relating to safety. Not complying with these
instructions may cause injury to the person or to other persons, or it may cause damage to
equipment or material being processed.

PART LIST:
USING THE INFLATING GUN
1. Connect inflator to air compresor via appropriate hose, start compressor and open compressor tap,
set regulator of compressor to pressure greater than that of tyre to be inflated.
2. Connect inflator with air valve of type.
3. Operate the trigger
4. If you over-inflate, repase some pressure by pressing the bleed valve at the top of handle.
WARNING: When a tyre is totally deflated it can separate from the wheel rim, allowing air to leak. If
this occures, it will be neccessary to jack up the vehicle to raise the tyre off the ground befor
attempting to inflate. The tyre may however still leak slowly, and should be checked by mechanic or
tyre specialist.
MAINTENANCE
Keep it clean. Regularly lubricate the moving parts of the trigger.
Equipment store in a dry area, protected from the weather.
Stored near chemicals and gases, causing corrosion is inaccessible.
To prevent damage to the unit during transport, pack it securely and use the original
packaging.
SUPPLIER: LEVIOR s.r.o.