Leviton Berk-Tek EXT-100 User manual

The EXT-100 Extender Kits are robust, long reach single port UTP solutions designed for indoor
applications. For outdoor applications, the remote would need to be placed into a NEMA rated
enclosure suitable for the installation environment. Contact 1-800-BERKTEK for patch cords designed
for harsh environments. The kit includes a EXT-100-Main, a EXT-100-Remote, and a 60 watt 55 V power
supply. The EXT-100-Remote, when connected to the EXT-100-Main unit via four-pair UTP cable, can
deliver 100 Mbps (symmetrical full duplex) with up to 30 watts of power at a 2,000 ft (610 m) reach. The
EXT-100 offering is designed specifically to enable easy deployment over UTP for reaches beyond that
of standard Ethernet, eliminating the costs and disruption associated with IDF closet requirements.
QUICK INSTALL GUIDE - EXT-100 EXTENDER KIT
PRODUCT OVERVIEW
EXT-100 Extender Kit (EXT-100-Main + EXT-100-Remote + 60 W, 55 V Power Supply)
P/N: EXT-100 81001153
Installation Steps (for EXT-100 Extender Kit)
EXT-100-Main*EXT-100-Remote
Standard PoE Switch
Local Power
Up to 60 W, 55 V
(Optional)
Four-Pair UTP Cable
up to 2,000 ft (610 m)
3519117151713212319272925333531394137454743 462101281618142224202830263436
SFP+1
SFP+2
SFP1 SFP2
32404238464844
EXT-100-Remote
Main Device
Redene the limits DEVICE
Local Power
Up to 60 W, 55 V
(Optional)
The max length supported
between the EXT-100-Main and
the PoE Switch is 328 ft (100 m)
Activity
37-55V
DC IN
Link/Speed
Green:
100Mbps
Orange:
10Mbps
TO REMOTE
37-55V
10 GR
ACT
LNK
SPD
100 GR
Link Activity
TO SWITCH
ACTLNK
Link Activity
Activity
37-55V
DC IN
Link/Speed
Green:
100Mbps
Orange:
10Mbps
TO MAIN
37-55V
DC IN
ACTLNK/SPD TO DEVICE
ACTLNK
To DeviceTo Switch To Main
(EXT-100-Main)
To Remote
(EXT-100-Remote)
Product Details (EXT-100-Main)
• Paired with EXT-100-Remote
• Up to 30 W PoE
• Local power option
• IEEE compliant
Product Details (EXT-100-Remote)
• Paired with EXT-100-Main
• Up to 30 W PoE
• Local power option
• IEEE compliant
1. Remove the EXT-100-Main and EXT-100-Remote from packaging.
2. Must ensure cable is properly terminated before connecting any EXT-100 product.
3. Remove all legacy equipment from the UTP cable infrastructure.
NOTE: In order to avoid damage to devices, it is important that only IP devices are connected when you connect the EXT-100-Main.
4. Connect EXT-100-Main (Switch side) to downlink port on switch.
5. Connect the Network Infrastructure cable from the EXT-100-Main (Remote side) to EXT-100-Remote (Main side).
6. Using Cat 5e or higher category cable, connect the device to the EXT-100-Remote (Device side).
NOTE: Berk-Tek recommends using LANmark IP (22AWG) or higher for indoor applications; LANmark-6 OSP, LANmark-1000 OSP, or LANmark-10G
OSP should be used for outdoor applications.
The EXT-100-Remote must be installed either indoors or in a NEMA rated box appropriate for the installation environment.
Installations must be compliant with the requirements of the local authority having jurisdiction.
Copyright 2019 Berk-Tek LLC | 445-0027-A | Page 1
1-800-BERK-TEK (1-800-237-5835) | [phone] |
www.leviton.com/berktek
The max length supported
between the EXT-100-Remote and
the Device is 328 ft (100 m)

QUICK INSTALL GUIDE - EXT-100 EXTENDER KIT
Power & Distance
Safety Warnings and Precautions
All of the above instructions provide basic installation information necessary for the proper and safe functioning of this equipment. Persons installing
or maintaining this product must read all of the safety instructions, which are applicable to the system being maintained. Only trained, qualified
service personnel shall install or maintain this product.
Distances assumes a 4-Pair category cable between the main and remote at 20°C. From the remote, a full 100 meters to the device. For other installation
configurations, please go to www.berktek.us/extendedpoe.
Note the following:
• Keep these instructions with the equipment.
• Do not attempt to install or service this equipment unless you are skilled in the installation and maintenance of electronic telecommunications
equipment and have successfully completed specific training for this equipment.
WARNING: FAILURE TO FOLLOW ALL INSTRUCTIONS MAY RESULT IN IMPROPER EQUIPMENT OPERATION AND/OR RISK OF ELECTRICAL SHOCK.
WARNING: ANY CONNECTION TO AN OUTSIDE PLANT LEAD, AN OFF-PREMISE APPLICATION, OR ANY OTHER EXPOSED PLANT APPLICATION MAY RESULT IN A FIRE OR SHOCK HAZARD,
AND/OR DEFECTIVE OPERATION, AND/OR EQUIPMENT DAMAGE.
Compliance and Environmental Information
All the compliance and environmental information is available on our website www.leviton.com/berktek.
Technical Support
The Berk-Tek TEK Support group is available to assist you with product installation, configuration, monitoring, and troubleshooting procedures.
Should you experience trouble with this equipment or need repair/warranty information, please contact TEK Support at 1-800-BERK-TEK
or [e-mail].
Warranty: The EXT-100 adapters are backed by Berk-Tek's customer support and a three (3) year warranty.
• Refer to the EXT-100 Quick Install Guides under “Safety Warnings” for the EXT-100 adapters
• Reportez-vous aux Quick Install Guides EXT-100 sous "Safety Warnings" pour les adaptateurs EXT-100
• Beachten Sie die EXT-100 Quick Install Guides unter "Safety Warnings” für die EXT-100-Adapter
• Consulte las Quick Install Guides EXT-100 bajo "Safety Warnings" para los adaptadores EXT-100
• Katso EXT-100 Quick Install Guides EXT-100-sovittimien "Safety Warnings" alla
• Raadpleeg de EXT-100 Quick Install Guides onder "Safety Warnings" voor de EXT-100-adapters
• Se EXT-100 Quick Install Guides under "Safety Warnings" för EXT-100-adaptrarna
• Se EXT-100 Quick Install Guides under "Safety Warnings" for EXT-100-adaptere
• Ανατρέξτε στους οδηγούς EXT-100 Quick Install Guides στην ενότητα "Safety Warnings" για τους προσαρμογείς EXT-100
• Fare riferimento alla sezione EXT-100 Quick Install Guides sotto "Safety Warnings" per gli adattatori EXT-100
• Consulte o EXT-100 Quick Install Guides em "Safety Warnings" para os adaptadores EXT-100
• Irreferi għall-EXT-100 Quick Install Guides taħt "Safety Warnings" għall-adapters EXT-100
• Vaadake EXT-100 Quick Install Guides alusel "Safety Warnings" EXT-100 adapterid
• A EXT-100 adapterek "Safety Warnings" című részében olvassa el a EXT-100 Quick Install Guides című részt
• Nanašajo na EXT-100 Quick Install Guides pod "Safety Warnings" za EXT-100 adapterji
• Další informace naleznete v příručkách EXT-100 Quick Install Guides v části "Safety Warnings" pro adaptéry EXT-100
• Kreiptis į EXT-100 Quick Install Guides pagal "Safety Warnings" Už EXT-100 adapteriai
• Skatiet EXT-100 Quick Install Guides zem "Safety Warnings", lai EXT-100 adapteri
• Pozrite si EXT-100 Quick Install Guides v časti "Safety Warnings" pre adaptéry EXT-100
• Sjá EXT-100 Quick Install Guides undir "Safety Warnings" fyrir EXT-100-millistykki
• Zobacz EXT-100 Quick Install Guides w sekcji "Safety Warnings" w przypadku adapterów EXT-100
• Se EXT-100 Quick Install Guides under "Safety Warnings" for EXT-100-adaptere
• Consultați ghidurile EXT-100 Quick Install Guides din secțiunea "Safety Warnings" pentru adaptoarele EXT-100
• Обърнете се към EXT-100 Quick Install Guides в "Safety Warnings" за адаптери EXT-100
1-800-BERK-TEK (1-800-237-5835) | [phone] |
www.leviton.com/berktek
Copyright 2019 Berk-Tek LLC | 445-0027-A | Page 2
PoE Level Max Supported Distance between the Main and Remote
IEEE 802.3af (PoE) 2000 ft (610 m)
IEEE 802.3at (PoE+) 1250 ft (380 m)