Levoit Classic 42-Inch User manual

42-Inch Tower Fan
Questions or Concerns?
Please contact us Mon–Fri, 9:00 am–5:00 pm PST/PDT
at [email protected] or at [phone].
USER MANUAL

2
Table of Contents
Package Contents
Specifications
Safety Information
Getting to Know Your Tower Fan
Controls & Display
Remote Control
Getting Started
Using Your Tower Fan
Care & Maintenance
Troubleshooting
Warranty Information
Customer Support
2
2
3
5
6
6
7
8
10
11
13
15
Package Contents
1 x Tower Fan
2 x Base
1 x Remote Control
1 x Quick Start Guide
1 x User Manual
Specifications
Model LTF-F422-WUS
Power Supply 24V 1.5A
Rated Power 26W
Timer 1–12 hr
Max Speed 25 ft/s
Noise Level 25–48dB
Dimensions 6.3 x 6.7 x 42.4 in /
16 x 17.1 x 107.6 cm
Weight 11 lb / 5 kg

3
SAFETY INFORMATION
• Only use your tower fan as described in
this manual. Any other use may cause a
fire, electric shock, or personal injury.
• Do not use your tower fan outdoors.
• To protect against electric shock, do not
immerse the tower fan cord, adapter, or
housing in water or spray with liquids.
• Do not place the tower fan in a window.
Keep your tower fan away from water and
wet or damp areas. Keep your tower fan
away from open flames, heat sources, or
other heating and cooking appliances.
• Do not use where combustible gases,
vapors, metallic dust, aerosol (spray)
products, or fumes from industrial oil are
present.
• Do not place anything into any opening
on the tower fan.
• Do not use with any openings blocked;
keep free of dust, lint, hair, and anything
that may reduce airflow.
• Avoid contact with moving fan parts.
• Do not hang or mount the tower fan on a
wall or ceiling.
• Only use the tower fan on a dry and level
surface.
• Close supervision is necessary when the
tower fan is used by or near children.
• Children should be supervised to ensure
that they do not play with the tower fan.
• Children should be supervised to ensure
they do not insert fingers or objects into
the vent openings.
• Children should not clean or perform
maintenance on the tower fan without
supervision.
• Keep the inside of the tower fan dry. To
prevent moisture buildup, avoid placing in
rooms with major temperature changes.
To reduce the risk of fire, electric shock, or other injury, follow all instructions and safety
guidelines.
General Safety
READ AND SAVE THESE
INSTRUCTIONS
• Unplug the tower fan when not in use for
an extended period of time.
• Do not use other items or third-party parts
as replacement parts for this tower fan.
• Do not use your tower fan if it is damaged
or not working correctly, or if the cord or
adapter is damaged. Do not try to repair it
yourself. Contact Customer Support (see
page 15).
• WARNING: To reduce the risk of fire or
electric shock, do not use this tower fan
with any solid-state speed controls (such
as a dimmer switch).
• This tower fan is not to be used by
persons (including children) with reduced
physical, sensory, or mental capacities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning the use of the
appliance by a person responsible for their
safety.
• Not for commercial or industrial use.
Household use only.
• Ensure that the fan is switched o from the
supply mains before removing the guard.
• Do not operate any fan with a damaged
cord or plug. Discard fan or return to an
authorized service facility for examination
and/or repair.
• Do not run cord under carpeting. Do not
cover cord with throw rugs, runners, or
similar coverings. Arrange cord away from
trac area and where it will not be tripped
over.
Power Adapter
• Your tower fan has a polarized adapter (one
prong is wider than the other), which fits

4
Electromagnetic Fields (EMF)
Your Levoit tower fan complies with all standards
regarding electromagnetic fields (EMF). If handled
properly and according to the instructions in this
user manual, the appliance is safe to use based
on scientific evidence available today.
Swallowing can lead to chemical burns,
perforation of soft tissue, and death. Severe
burns can occur within 2 hours of ingestion.
Seek medical attention immediately.
• Place sticky tape around both sides of the
battery and dispose of it immediately in an
outdoor trashcan or recycle safely;
• Store spare batteries securely;
• Empty recycling units on a regular basis;
• Use non-transparent containers to keep
the batteries out of view.
This product contains a coin/button battery.
WARNING: CHEMICAL
BURN HAZARD.
KEEP OUT OF REACH
OF CHILDREN.
These sorts of symptoms vary or fluctuate, with
the pain increasing and then subsiding.
A specific symptom to button and coin battery
ingestion is vomiting fresh (bright red) blood.
If a child does this, seek immediate medical
help.
The lack of clear symptoms is why it is
important to be cautious with “flat” or spare
button or coin batteries in the home and the
products that contain them. Be aware that
even used button or coin batteries may cause
injury.
Unfortunately, it is not obvious when a button
or coin battery is stuck in a child’s esophagus
(food pipe). The child might:
• Cough, gag or drool a lot;
• Appear to have a stomach upset or a virus;
• Be sick;
• Point to their throat or stomach;
• Have pain in their abdomen, chest, or throat;
• Be tired or lethargic;
• Be quieter or more clingy than usual or
otherwise “not themselves”;
• Lose their appetite or have a reduced
appetite;
• Not want to eat solid food / be unable to eat
solid food.
into a polarized outlet only one way. If the
adapter does not fit, reverse the adapter. If
it still does not fit, do not use the adapter
in that outlet. Do not alter the adapter in
any way.
• This device is only to be used with the
power supply unit provided with the device.
• Turn o the tower fan before removing the
adapter from the outlet. To unplug, grab the
adapter and pull from the outlet. Never pull
from the power cord.
• Keep the tower fan near the outlet it is
plugged into. The use of an extension cord
is not recommended.
• Always turn the tower fan o and unplug
it when not in use and before moving,
cleaning, or servicing the fan.
• Turn o and unplug the adapter when not in
use for extended periods of time.
• Never place the cord near any heat source.
• Do not cover the cord with a rug, carpet, or
other covering. Do not place the cord under
furniture or appliances.
• To avoid a tripping hazard, keep the cord
out of areas where people walk often. Place
the cord where it will not be tripped over
and safely coil the cord.
• A loose fit between the outlet and plug may
cause overheating and a distortion of the
adapter. Contact a qualified electrician to
replace a loose or worn outlet.
• If the power adapter is damaged, it must
be replaced by Arovast Corporation or
similarly qualified persons in order to avoid
an electric or fire hazard. Please contact
Customer Support (see page 15).
• Your tower fan should only be used
with 120V, 60Hz electrical systems.
Do not plug into another type of outlet.

5
GETTING TO KNOW YOUR TOWER FAN
A. Control Panel
B. LED Display
C. Vents
D. Angle Adjuster
E. Power Adapter
F. Remote Control
G. Back Cover
H. Base
I. Oscillate Button
J. Fan Mode Button
K. Advanced Sleep Button
L. Timer Button
M. Fan Speed Button
N. On/O Button
LED Display
Control Panel
O. Normal Mode Indicator
P. Advanced Sleep Mode
Indicator
Q. Fahrenheit Indicator
R. Sound O Indicator
S. Auto Mode Indicator
T. Turbo Mode Indicator
U. Hour Indicator
V. Oscillate Indicator
O
S
P
E
G
T
Q
U
R
V
K
LI
N
M
A
H
B
C
D
F
J

6
CONTROLS & DISPLAY
REMOTE CONTROL
On/O Button
• Tap to turn the tower fan
on/o.
Fan Speed Button
• Tap to cycle through fan
speeds from 1 (low) to 12
(high).
Fan Mode Button
• Tap to cycle through fan
modes: Normal Fan, Turbo,
and Auto (see Fan Modes,
page 8).
• Press and hold for 3
seconds to turn selection
sounds on/o.
Timer Button
• Tap to cycle through timer
options from 1–12 hours.
• Press and hold to quickly
cycle through options in
increments of 1 hour.
Sound O Button
• Press to turn selection sounds
on/o.
Advanced Sleep Button
• Tap to turn Advanced
Sleep Mode on/o (see
Advanced Sleep Mode,
page 9).
Oscillate Button
• Tap to turn oscillation on/o.
• The tower fan has a 90°
angle of oscillation.
Note:
• Remove the plastic tab from the remote
control’s battery compartment before using.
• To replace the battery, see page 11.
The remote control can be used to control
any of the tower fan’s functions from a
distance. The remote must be within 16 ft /
5 m of the tower fan to work.
On/O
Button
Sound O
Button
Timer
Button
Fan Mode
Button
Oscillate
Button
Advanced
Sleep
Button
Increase/
Decrease
Fan Speed

7
WARNING: Do not use the fan before finishing assembly.
GETTING STARTED
1. Remove all packaging.
2. Snap the two pieces of the base
together. [Figure 1.1]
Figure 1.1
Figure 1.2
Figure 1.3
3. Unscrew the plastic nut from underneath
the tower fan. [Figure 1.2]
4. Secure the base to the tower fan with the
plastic nut. [Figure 1.3]
5. Place the tower fan on a flat, stable
surface such as the floor.
6. When using the tower fan, allow at least
15 inches / 38 cm of clearance from the
front of the tower fan. Keep away from
anything that would block air flow, such
as curtains. [Figure 1.4]
Figure 1.4
15 in /
38 cm

8
Use Turbo Mode with air conditioning to
quickly circulate air in your home.
Turbo Mode
USING YOUR TOWER FAN
1. Plug in and tap to turn on the tower
fan.
2. Tap to change fan speed from 1 (low)
to 12 (high).
3. Move the angle adjuster up and down to
adjust the direction of the wind.
[Figure 2.1]
4. Optionally, tap to select a dierent
fan mode, or tap to turn Advanced
Sleep Mode on/o.
1. Tap and select Turbo Mode. and
will show on the display.
2. The tower fan automatically starts
oscillating and operates at fan speed 12.
3. When the room temperature drops
5°F, the fan speed will decrease to 6,
then the tower fan will automatically
adjust fan speed according to the room
temperature.
Note: You can turn o oscillation by tapping
on the tower fan or pressing on the remote.
Figure 2.1
Tap to cycle through fan modes: Normal,
Turbo, and Auto.
• This is the tower fan’s default mode.
• will show on the display.
Fan Modes
Normal Mode
Use Normal Mode to manually control the
tower fan’s speed. Tap to change fan
speed from 1 (low) to 12 (high).

9
Advanced Sleep Mode is an optimized sleep
mode that takes into account the stages
before you sleep, during sleep, and as you
wake up.
Use Auto Mode for automatic fan speed
adjustments according to the room
temperature.
Advanced Sleep Mode
Auto Mode
USING YOUR TOWER FAN (CONT.)
1. Tap to turn Advanced Sleep Mode
on. and will show on the
display.
a. After 5 seconds, the display will
turn o and selection sounds will
be disabled.
b. The starting fan speed is deter-
mined by your current fan speed
when you select Advanced Sleep
Mode.
2. After 1 hour, the fan speed will decrease
as the room temperature stabilizes.
3. The tower fan then begins oscillating
and automatically adjusts the fan speed
according to the fluctuating room
temperature as you sleep and wake up.
a. If the temperature increases 2°F,
the fan speed will increase one
level.
b. If the temperature decreases 2°F,
the fan speed will decrease one
level.
4. Tap or to turn Advanced Sleep
Mode o.
1. Tap and select Auto Mode. will
show on the display.
2. The starting fan speed is determined by
the current room temperature.
Note: The max ambient working temperature
is 104°F.
3. Optionally, tap to manually adjust the
fan speed while in Auto Mode. The tower
fan will then operate according to the
following logic:
a. If the temperature increases 2°F,
the fan speed will increase one
level.
b. If the temperature decreases 2°F,
the fan speed will decrease one
level.
Room
Temperature Fan Speed
≤ 70°F 1
72°F 2
74°F 3
76°F 4
78°F 5
80°F 6
82°F 7
84°F 8
86°F 9
88°F 10
90°F 11
> 90°F 12

10
CARE &
MAINTENANCE
Cleaning the Tower Fan
1. Unplug before cleaning.
2. Wipe the outside of the tower fan with
a soft, dry cloth. If necessary, wipe
the housing with a damp cloth, then
immediately dry.
3. Use a vacuum, duster, or compressed air
to clean the inside of the tower fan.
4. If necessary, use a screwdriver to remove
the back cover and clean the inside of
the tower fan. [Figure 3.1]
Figure 3.1
When the tower fan is in standby or turned
o and unplugged, it will remember all its
previous settings, except for timer.
Turn on Auto Display O if you would like the
display to automatically turn o when there is
no operation.
1. Press and hold for 3 seconds to turn
on Auto Display O.
2. After 60 seconds of no operation, the
display will automatically turn o (except
in Advanced Sleep Mode).
3. Tap any button to temporarily turn the
display back on. If you don’t tap another
button, the display will turn back o after
60 seconds.
4. Press and hold for 3 seconds to turn
o Auto Display O.
• The tower fan is in Standby Mode
when it is turned o, but plugged in.
• Tap to turn the tower fan on.
Auto Display Off
Memory Function
Standby Mode
USING YOUR TOWER FAN (CONT.)
Notes:
• Make sure the tower fan is turned o
before removing the back cover.
• Clean the internal parts with a dry
cloth.
• Do not clean with abrasive chemi-
cals or flammable cleaning agents.
• Do not allow water to drip into the
motor housing.

11
Replacing the Remote Control
Battery
If not using the tower fan for an extended
period of time, cover the tower fan and
store in a cool, dry place to avoid moisture
damage.
Storage
Figure 3.2
Figure 3.3
1. Insert a coin/button battery into the slot
and rotate counterclockwise to remove
the battery compartment. [Figure 3.2]
2. Remove the old battery.
3. Replace with a new 3V CR2025 battery.
Make sure the polarities match.
[Figure 3.3]
4. Replace the battery compartment.
Problem Possible Solution
Tower fan will not turn on or
respond to button controls.
Plug in the tower fan.
Check to see if the power cord is damaged. If so, stop using
the tower fan and contact Customer Support (see page 15).
Plug the tower fan into a dierent outlet.
Tower fan may be malfunctioning. Contact Customer Support
(see page 15).
Tower fan makes an unusual
noise while the fan is on.
Make sure the tower fan is operating on a hard, flat, level
surface.
Tower fan may be damaged, or a foreign object may be
inside. Stop using the tower fan and contact Customer
Support (see page 15). Do not try to repair the tower fan.
Tower fan randomly turns o. Tower fan is malfunctioning. Stop using the tower fan and
contact Customer Support (see page 15).
TROUBLESHOOTING
If your problem is not listed, please contact Customer Support (see page 15).

12
FEDERAL COMMUNICATION COMMISSION
INTERFERENCE STATEMENT – PART 15
FCC SDOC SUPPLIER’S DECLARATION
OF CONFORMITY
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
Arovast Corporation hereby declares that this equipment is in compliance with the FCC
requirements. The declaration of conformity may be consulted in the support section of our
website, accessible from www.levoit.com