
// Please Note
// The capsule is a sensitive, high precision component. Make sure you do not drop it from high heights and avoid strong
mechanical stress and force.
// To ensure high sensitivity and best sound reproduction of the microphone, avoid exposing it to moisture, dust
or extreme temperatures.
// Do not apply excessive force on the switches or the connected cable.
// When disconnecting the microphone cable, grasp the connector and do not pull the cable.
// Do not attempt to modify or x the microphone, as it would void your product warranty.
// The casing of the microphone can be cleaned easily using a wet cloth, never use alcohol or another solvent for cleaning.
// The windshield can be washed with soap water, if necessary.
LEWITT ®
Burggasse 79
1070 Vienna
Austria
www.lewitt-audio.com
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
READ THE
FULL MANUAL!
LEARN EVERYTHING ABOUTYOUR DTP 640 REX
www.lewitt-audio.com/resources/manuals/DTP-640-REX.pdf
JOIN US ON
TWITTER!
JOIN US ON
FACEBOOK!
// Getting started
1 Connect the supplied Y-cable (DTP 40 Trs) 1with its 5-pin XLR plug to the DTP 640 REX 2 .
Connect the two 3-pin XLR plug marked with CONDENSER and DYNAMIC to your mixing console, audio interface or
microphone preamplier.
2Supply the DTP 640 REX with 48V phantom to power the condenser element (you do not need phantom power
when exclusively using the dynamic capsule).
3Set the input gain on your mixing console, preamp, etc. accordingly.
4To ensure best sound quality, do not cover any part of the grille.
5Experiment with different mixes of the two capsules to nd your perfect sound.
6Rock!
// Dual Element Technology
Your DTP 640 REX is equipped with a dynamic capsule and a condenser capsule – the dynamic element ensures accurate
reproduction of the bass drum kick, while the condenser element captures the rich, low frequency sound of the drum’s shell.
These two elements can be separately mixed on their own channels. The enclosed DTP 40 Trs cable connects the DTP 640 REX
to two channels on your mixing board. The two channels can be mixed according to your preferences.
QUICKSTART GUIDE
// DTP 640 REX