Lewitt DGT 650 User manual

1
RECORDING STUDIO
THE MOBILE
iOS // OS X // WINDOWS MICROPHONE AND INTERFACE IN ONE
// DGT 650
QUICKSTART GUIDE
// User Interface
1Input indicator // Displays active recording mode
Stereo Mode // Cardioid Mode // Singer/Songwriter Mode // Stereo
Line-In Mode
2Monitoring modes // Mix the output signal of your device with the
input signal of your microphone
Return // Monitor the Output of your PC, Mac or iOS device
Direct // Monitor the input of the DGT650 without any latency
3 Charging port // Use a dedicated USB charger as power supply for
the DGT 650 on mobile devices to charge the internal battery
4 High-pass fi lter // Use to get rid of unwanted low frequencies.
5Pre-attenuation // Use for loud input signals to prevent clipping.
6 LED Graph // Displays a value for some settings like headphone
gain, input gain, and others
7Battery Status // Indicates if the device is powered from the
internal battery or connected to a charger
8I/O Gain // Input and output gain settings
9 Jog Dial // Turn and push to change settings.
10 Data Connector
11 Headphone jack
12 MIDI in
13 Line-in // Setup
Connect the breakout box to your microphone. Connect the data
connector cable to the breakout box (10) and the USB connector to
your computer or the lightning connector to your iOS device.
OS X (10.6 and up) // Connect the DGT 650 to the breakout box and the breakout box to the USB port.
Open “system preferences” in the menu at the top of the screen. // Click on the “Sound” icon. // Click the “Output” tab and select
“DGT 650.” // Click the “Input” tab and also select “DGT 650.”
Windows // Connect the DGT 650 to the breakout box and the breakout box to the USB port. // Download the drivers and Control
Center for changing the settings of your DGT 650 from your computer at www.lewitt-audio.com/DGT-Series/DGT-650/Downloads
– please follow the onscreen instructions.
iOS // Just plug and play. But do make sure that the internal battery is charged or that a charger is connected to the dedicated
charging port. If no audio signal is sent to or coming from the DGT 650, iOS will turn it off after a few seconds.
Made for iPhone 5, iPhone 5s, iPhone 5c, iPad (4th generation),
iPad Air, iPad mini, iPod touch (5th generation)

2
// Operating the microphone
The following will walk you through all the settings of your DGT 650.
Standard Mode // This is the default state of the device when you power it on (the LEWITT logo is illuminated white).
Settings Mode // This is where you can change all the settings on your DGT 650 including recording modes,
monitoring options, high-pass lters, pre-attenuation and gain. The illuminated LEWITT logo will turn off as soon
as the microphone switches to Settings Mode. Press the jog dial (9) to switch from setting to setting and rotate it to
change the selected setting.
Recording Mode // The selected recording mode symbol is lit. Rotate the jog dial to change the recording mode.
Press the jog dial to switch to the next setting.
Monitoring Mode // Use the jog dial to blend between tape return monitoring and direct monitoring (2). The LED
graph (6) shows the mixture of the two modes. Press the jog dial to switch to the next option.
High-pass Filter // Set the high-pass (4) with the jog dial. Press the jog dial to switch to the next option.
Pre-Attenuation // Set the pre-attenuation (5) by rotating the jog dial. Press the jog dial to switch to the next option.
Headphone/Output Gain // The headphone symbol is lit. Rotate the jog dial to change the output volume.
Input Gain // Press the jog dial until the input gain symbol is lit. The settings will change depending on the selected
recording mode. You can set input gain levels for all 4 recording modes individually.
Stereo Mode selected // Gain L R will be lit. Rotate the jog dial to change the gain for both capsules together.
Cardioid Mode selected // Gain L R will be lit. Rotate the jog dial to change the gain.
Singer/Songwriter Mode selected // Gain L will be lit rst. This lets you set the gain for the left channel – in this
mode, it’s the cardioid microphone. Press the jog dial; Gain R will now be lit. This lets you change the gain of the
right channel – in this mode, it’s line input.
Stereo Line Mode selected // Gain L R will be lit rst. This lets you change the left and right-channel gain settings
together. Press the jog dial again; Gain L will be lit. This lets you adjust the gain of the left input separately. Press
the jog dial again to change the gain of the right channel separately.
// DGT 650
DOWNLOAD THE
CONTROL CENTER!
READ THE
FULL MANUAL!
QUICKSTART GUIDE
CONTROL YOUR DGT 650 AND CHANGE ITS
SETTINGS FROM YOUR COMPUTER
www.lewitt-audio.com/DGT-Series/DGT-650/Downloads
LEARN EVERYTHING ABOUTYOUR DGT 650
www.lewitt-audio.com/DGT-Series/DGT-650/Downloads