Lexmark Apps User manual

Multi Send
User's Guide
June 2011 www.lexmark.com
Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.
All other trademarks are the property of their respective owners.
© 2011 Lexmark International, Inc.
All rights reserved.
740 West New Circle Road
Lexington, Kentucky 40550

Edition notice
June 2011
The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC.,
PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties
in certain transactions; therefore, this statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes
will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.
References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries
in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may
be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead.
Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the
manufacturer, are the user’s responsibility.
For Lexmark technical support, visit support.lexmark.com.
For information on supplies and downloads, visit www.lexmark.com.
If you don't have access to the Internet, you can contact Lexmark by mail:
Lexmark International, Inc.
Bldg 004-2/CSC
740 New Circle Road NW
Lexington, KY 40550
USA
© 2011 Lexmark International, Inc.
All rights reserved.
Trademarks
Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.
All other trademarks are the property of their respective owners.
UNITED STATES GOVERNMENT RIGHTS
This software and any accompanying documentation provided under this agreement are commercial computer software and documentation
developed exclusively at private expense.

Using Multi Send
The Multi Send solution is an application that lets you scan a document and then send the scanned document to multiple
destinations. The application requires available space on the printer hard disk.
Scanning documents using Multi Send
1Load the document into the scanner.
Note: Documents may be loaded into the scanner in multiple ways. For more information, see the User's Guide
that came with the printer.
2From the printer home screen, touch the profile icon containing the destination or destinations where you want to
send the scanned document.
3Depending on how the profile has been configured, some additional job options may be available when scanning
a document. Follow the instructions on the printer home screen to customize the options or enter the necessary
information.
Note: These job options are configured when your system support person creates the profile. For more information
on the existing profiles, contact your system support person.
4Depending on how the profile has been configured, you may be prompted to adjust the scan options. Change the
settings if necessary, and then touch Scan It.
5To scan additional documents, load the next document into the scanner, and then touch Accept and Continue.
Otherwise, touch Finish the Job.
Using Multi Send
3