LG I17S User manual

Car AVN
User Manual
Model Name : I17S

(2) Specifications
*Product
Item Categories Specifications
Specification
Product Name GM AVN CADILLAC
Model I17S
Dimensions Refer to image
Weight 1.16kg
Power source DC 12V
Operational
temperature range -40 ℃ ~ 85 ℃
1. Overview and Specifications
(1) Overview
1) The Infotainment system provides Infotainment in your car, using the latest
technology. See your dealer to have the system or software updated and upgraded.
2) The Infotainment system can play the USB storage device or iPod/iPhone products.
3) The Bluetooth phone connection function allows for the use of wireless hands-free
Phone calls, as well as a phone music player.
In addition, the WiFi function is provided.

< Basic Design Concept >
180mm
60mm
<Front View>
172.5mm
46.7mm
<Right View>
<Top View>
* Silver Box
1) Silver box : 180mm x 172.5mm x 60mm ( Weight : 1.16kg)

*RF specifications
[ BT ]
[ Wi-Fi ]
Item Specifications Unit
Standard IEEE 802.11 a/b/g/n/ac
Frequency 2.4G 2412-2462 MHz
5G 5180 ~ 5825 MHz
Bandwidth 20 / 40 / 80 MHz
Data rate
2.4G 802.11 b 20M 1, 2, 5.5, 11 Mbps 802.11 g 20M 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11 n 20M 6.5, 13, 19.5, 26, 39, 52, 58.5, 65 Mbps
5G
802.11 a 20M 6,9,12,18,24,36,48,54 Mbps
802.11 n 20M 6.5, 13, 19.5, 26, 39, 52, 58.5, 65 Mbps
802.11 n 40M 13.5, 27, 40.5, 54, 81, 108, 121.5, 135 Mbps
802.11 ac 20M 6.5, 13, 19.5, 26, 39, 52, 58.5, 65, 78 Mbps
802.11 ac 40M 13.5, 27, 40.5, 54, 81, 108, 121.5, 135
162, 180 Mbps
802.11 ac 80M 29.3, 58.5, 87.8, 117, 175.5, 234
263.3, 292.5, 351, 390 Mbps
Modulation DSSS, BPSK,
16-QAM, 64-QAM, 256-QAM
Mode AP, Station, AP and station
coexistence
Item Specifications Unit
Frequency 2402-2480 MHz
Modulation Type GFSK, π/4 DQPSK, 8 DPSK
BT Power 4 (BT Class2) dBm
Data rate 1 ~ 3 Mbps
Channel spacing 1MHz
BT version BT4.2 + EDR
(BT LE was disabled by software) MHz

2. Component
No. Part Material
1 Top case ADC12
2 Bottom Case ADC12
3 Antenna Cover PC+ABS
4Shield Can Top
inner NSP C7701 t=0.2
5Shield Can Top
outer NSP C7701 t=0.2
6Shield Can
Bottom inner NSP C7701 t=0.2
7Shield Can
Bottom outer NSP C7701 t=0.2
8 PCB PCB ( Epoxy , T=1.6 )
9 etc. Screws, Clip, Sheets
Material
M3.5 x 8.0mm, Machine Screw,
5ea
Top Case
Bottom
Case
Antenna Cover
Shield Can
PCB

Touch
Gestures
Steering Wheel Controls
(Right-hand set)
Multifunction Controller
Touch Gestures
3. Operation
1. Volume / Power Knob
2. Audio Switch
3. Phone Switch
4. Navigation Switch
5. Vehicle Information Switch
6. Back Switch
7. Home Switch
8. Rotary Knob
Major controls of Info3.5C
1. SWC Control Area
• Right side of IPC display
• Head Up Display
2. MFC Control Area
• Entire ICS display
3. Touch Control Area
• Left side of IPC display
• Entire ICS display

MFC
Symbol Gesture Description
Press
Long press
Tilt right
Tilt left
Tilt up
Tilt down
Rotate clockwise
Rotate
counterclockwise
Press dial shortly then release
Press dial and hold for some period of time.
Push dial to right
Push dial to left
Push dial up
Push dial down
Dialing clockwise
Dialing counterclockwise

TOUCH GESTURE
Symbol Gesture Description
Tap (Press)
Double tap
Long tap
/ Long press
(Press & Hold)
Flick (Flicking)
Drag & Drop
Pinch
Panning
You touch a part of the screen with your
finger and then take the finger off from the
screen
A Double Touch gesture consists two
Touches in quick succession.
A Long Press is performed by touching the
screen and holding that touch location for
some period of time.
You touch 2 parts of the screen while you
move and then take the fingers off from
the screen (Factors: start point, end point)
You move from one point to the other
point quickly and then take the finger off
from the screen (Factor: direction)
You touch a part of the screen for 1 second
or more while you move and then take the
finger off from the screen
You bring your two fingers Cancel or slide
them apart on the screen (Factors: start
point, end point)

4. Precautions
1) Always operate the vehicle in a safe manner. Do not become distracted by
the vehicle while driving and always be fully aware of all driving conditions.
Do not change settings or any functions. Pull over in a safe and legal
manner before attempting such operations. To promote safety, certain
functions are disabled unless the parking brake is on.
2) To reduce the risk of electric shock, do not remove the cover or back of
this product. There are no user-serviceable parts inside. Refer servicing to
qualified service personnel.
3) To reduce the risk of fire or electric shock, do not expose this product to
dripping or splashing water, rain, or moisture.
4) When driving your vehicle, be sure to keep the volume of the unit low
enough to allow you to hear sounds coming from the outside.
5) Do not drop it and avoid heavy impacts at anytime.
6) The driver should not watch the monitor while driving. If the driver
watches the monitor while driving, it may lead to carelessness and cause an
accident.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment.
Responsible Party
LG Electronics USA
1000 Sylvan Avenue Englewood Cliffs
New Jersey United States 07632 (Phone: [phone])
RF Exposure
The antenna (or antennas) must be installed so as to maintain at all times a distance minimum of at
least 20 cm between the radiation source (antenna) and any individual. This device may not be
installed or used in conjunction with any other antenna or transmitter.
l'exposition aux RF
L’antenne (ou les antennes) doit être installée de façon à maintenir à tout instant une distance
minimum de au moins 20 cm entre la source de radiation (l’antenne) et toute personne physique.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts
de licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le fonctionnement.