LG GW620F User manual

GW620fUser Guide
Some of the contents in this
manual may differ from your phone
depending on the software of the
phone or your service provider.

Part 15.21 statement
" Change or Modifications that are not expressly approved by the manufacturer could void
the user's authority to operate the equipment. “
Part 15.105 statement
This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device is not intended for sale in the USA.

Part 15 Class B Compliance
This device and its accessories comply with part15 of FCC rules.
Operation is subject to the following two conditions:
(1) This device & its accessories may not cause harmful interference.
(2) This device & its accessories must accept any interference received,
including interference that may cause undesired operation.
Body-worn Operation
This device has been tested for typical body-worn operations
with the distance of 0.79inches (2.0cm) from the user’s body.
To comply with FCC RF exposure requirements, a minimum separation distance
of 0.79inches(2.0cm) must be maintained from the user's body.
Additionally, Belt clips, holsters & other body-worn accessories may not contain
metallic components.

Congratulations on your purchase of the
advanced and compact GW620fphone by LG,
designed to operate with the latest digital mobile
communication technology.
Disposal of your old appliance
1When this crossed-out wheeled bin symbol is attached to
a product it means the product is covered by the European
Directive 2002/96/EC.
2All electrical and electronic products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the local
authorities.
3The correct disposal of your old appliance will help prevent
potential negative consequences for the environment and
human health.
4For more detailed information about disposal of your old
appliance, please contact your city office, waste disposal service
or the shop where you purchased the product.

8LG GW620f| User Guide
Getting to know your phone
Charger, cable and handsfree connector
Call key
• Dials a phone number and
answers incoming calls.
Multi-tasking
key
End/
Power key
• Ends or rejects
a call. Turns
the phone
on/off. Press
once to return
to the standby
screen.
WARNING: Putting a
heavy object on the phone or sitting on
it while it is in your pocket can damage
the phone’s LCD and touch screen
functionality.
Side keys
•When the screen is idle: volume
of ring and touch tone.
• During a call: earpiece volume.
TIP: To connect the USB cable, wait
until the phone has powered up and
has registered to the network.
Micro SD memory
card socket
Lock/Unlock key
Camera key

9
Change the
text input mode
(capital/ small)
Alpha numeric keys
Space key
Use to enter a space
when editing.
Clear key
• Clears a character
each time it is
pressed. Hold the
key down to clear
all input.
Enter key
Symbol key
•Enters symbolic
character
Open view

10 LG GW620f| User Guide
Open view
Battery
SIM card socket
Camera lens
Battery cover

11
Installing the SIM and battery
1Remove the battery cover
Slide the battery cover towards
the top and away from the phone.
2Remove the battery
Using the cut-out at the
bottom, lift it from the battery
compartment.
WARNING: Do not use
your ngernail to remove the
battery.
WARNING: Do not remove
the battery when the phone
is switched on, as this may
damage the phone.

12 LG GW620f| User Guide
Installing the SIM and battery
3Install the SIM card
Slide the SIM card into the SIM
card holder making sure that the
gold contact area on the card is
facing downwards. To remove the
SIM card, gently pull it outwards.
4Install the battery
First insert the top of the battery
into the top edge of the battery
compartment. Ensure that the
battery contacts align with the
phone’s terminals. Press the
bottom of the battery down until
it clicks into place.

13
5Charging your phone
Lift and twist the charger socket
cover on the top of your GW620f.
Insert the charger and plug it
into a mains socket. Your GW620f
needs to be charged until the
“Battery full” message appears on
the screen.

14 LG GW620f| User Guide
Memory card
Installing a memory card
You can increase the memory space
on your phone by using a Micro SD
memory card.
NOTE: A memory card is an optional
accessory.
1Open the memory card slot cover
on the right-hand edge of the
phone.
2Slide the memory card into the
slot until it clicks into place. Make
sure the gold contact area is
facing downwards.
3Close the cover.
Formatting the memory card
Your memory card may already be
formatted. If it isn’t, you will need
to format it before you can start to
use it.
1From the standby screen select
, then touch and choose
Phone settings.
2Touch Memory manager then
choose External memory.
3
Touch Format and then confirm
your choice.
4Enter the password, if one has
been set. The card will then be
formatted and ready to use.
TIP! To change your
default storage destination,
open Memory manager from
the Phone settings menu and
select the Primary storage
settings.

15
NOTE: If your memory card already
contains files, they will automatically
be put in the correct folder; for
example, videos will be stored in the
My Videos folder.
Transferring your contacts
To transfer your contacts from your
SIM to your phone:
1From the Communication menu,
select and choose Settings.
2Touch Copy.
3Choose SIM to handset.
4Choose Select all or choose
names one by one and touch
Copy.

16 LG GW620f| User Guide
Menu map
Touch on the standby screen to open the Main menu. From here you
can access further menus: Communication, Entertainment,Utilities and
Settings.
Communication
1 Address book
2 Call history
3 Messaging
4 Email
5 Dialling
6 Orange messenger
Entertainment
1 Camera
2 Orange music
3 Gallery
4 Media album
5 Muvee studio
6 Games & Apps
7 FM radio
Utilities
1 Orange world
2 World clock
3 Alarm
4 Organiser
5 Memo
6 Voice recorder
7 More
Settings
1 Profiles
2 Screen settings
3 Phone settings
4 Call settings
5 Bluetooth
6 Touch settings
7 Connectivity

17
Your standby screen
From here you can access all the
menu options, make a quick call,
view the status of your phone and
much more.
Touch screen tips
The standby screen is also a great
place to get accustomed to the
touch screen.
To select an item, touch the centre
of the icon. Your GW620fwill vibrate
slightly when it recognises you have
touched an option.
To scroll through lists, touch the last
item visible and slide your finger up
the screen. The list will move up to
display more items.
•There is no need to press too
hard; the touchscreen is sensitive
enough to pick up on a light, firm
touch.
•Use the tip of your finger to touch
the option you require. Be careful
not to touch any other options
around it.
•When the screen back light is off,
press the Unlock/Lock key on the
right hand side to bring back the
home screen.
•Don’t cover the phone with a case
or cover. The touchscreen won’t
work if any material is covering it.
•There are two types of idle screen.
Flick left or right to change your
idle screen type on the standby
screen.
1Widget idle - When you touch
, the mobile widget panel
appears. You can drag icons
displayed on the widget panel to
the main screen.
2Livesquare - On the Livesquare
screen, making a call, sending a
message and saving a number
is easy using the number
allocated to an avatar To use the
call, message or Address book
function, select an avatar and
choose the Quick key icon you
want to use.

18 LG GW620f| User Guide
Your standby screen
The quick keys
The quick keys provide easy, one-touch access to your most used functions.
Touch it to bring up the touch
dialling pad, which lets you
make a call. Enter the number
as you would on a normal key
pad and touch or press
the hard key.
Touch to open your address
book. To search for the
number you want to call, enter
the name of the contact at the
top of the screen using the
touchpad. You can also create
new contacts and edit existing
ones.
Touch to access the Messaging
options menu. From here you
can create a new SMS or MMS
or view your message folder.
Touch to open the full main
menu, which is divided into
four vertical sub-menus. Touch
the tab for each sub-menu to
view further options.

19
The status bar
The status bar uses various icons to
indicate things like signal strength,
new messages and battery life, as
well as telling you whether your
Bluetooth or GPRS is active.
Below is a table which explains the
meaning of the icons you are most
likely to see in the status bar.
Icon Description
Multi-tasking
Network signal strength
(number of bars will vary)
No network signal
Remaining battery life
Battery flat
New text message
New voice message
Message inbox is full
Icon Description
Message sending failed
An alarm is set
Customised profile in use
(number in the icon will
vary)
Normal profile in use
Outdoor profile in use
Silent profile in use
Headset profile in use
Calls are diverted
EDGE in use
Roaming
Flight mode is on
Bluetooth is active
BGM play
BGM pause

20 LG GW620f| User Guide
Your standby screen
Changing your status from
the status bar
Touch the status bar to open the
Status Summary. It shows the
current time, network, SVC ID,
battery, handset memory, external
memory, profile, MP3 and Bluetooth
status. Here you can set the Profile
type, play/pause MP3s and activate/
deactivate Bluetooth.
Using the Multi-tasking
function
Press the Multi-tasking hard key
to open the Multi-tasking
menu. From here you can view all
applications that are running and
access them with one touch.
When an application is running in
the background (e.g. a game or the
FM radio), will appear on the
status bar.

21
Calls
Making a call
1Touch to open the keypad.
2Key in the number using the
keypad. To delete a digit touch
the clear key.
3Press on the key pad or the
hard key to initiate the call.
4To end the call press the
hard key.
TIP! To enter + for making
an international call, press and
hold .
TIP! Press the lock/unlock
hard key to lock the
touchscreen and prevent calls
being made by mistake.
TIP! To bring up the
keypad during a call, press .
TIP! Touch to unlock. You can
unlock the phone by holding
down the button until the
screen is able to work or
pressing the Unlock hard key
.
TIP! You can send a
message, save a number and
search contacts by tapping .
Changing the dialling keypad
display settings
1Touch to open the keypad.
2Touch and select Dial screen
setting to change the dialling pad
display.
3You can change the size and
colour.

22 LG GW620f| User Guide
Calling your contacts
1From the standby screen touch
to open the address book.
2Tap the search field box and enter
the first few letters of the contact
you would like to call.
3From the filtered list, touch the
contact you want to call and
select the number to use if there
is more than one for that contact.
4Press the hard key.
Answering and rejecting a
call
When your phone rings press the
hard key or touch to
answer the call.
Tap to mute the ringing. This is
useful if you forgot to change your
profile to Silent for a meeting.
Press the hard key or touch
to reject an incoming call.
Adjusting call volume
To adjust the volume during a call,
use the up and down button on the
left edge of the phone.
Speed dialling
You can assign a frequently-called
contact to a speed dial number.
1From the standby screen touch
and select Address book in
the Communication menu and
then tap Speed dials.
2Your voicemail is already set to
speed dial 1. You cannot change
this. Touch any other number to
assign it to a speed dial contact.
3Your address book will open.
Select the contact you want
to assign to that number by
touching their phone number
once. To find a contact tap the
search field box and enter the first
letter of the name of the contact
required.
Calls

23
Making a second call
1During your initial call, touch
and select the number you want
to call.
2Dial the number or search your
contacts.
3Press to connect the call.
4Both calls will be displayed on the
call screen. Your initial call will be
locked and the caller put on hold.
5To change between the calls,
touch and choose Swap call
or press the number of the held
call.
6To end one or both calls press
and select End followed by All,
Held or Active.
TIP! You can combine your
calls by selecting Accept then
Join. Check that your network
provider supports conference
calling.
NOTE: You will be charged for each
call you make.
Turning off DTMF
DTMF lets you use numerical
commands to navigate menus
within automated calls. DTMF is
switched on by default.
To turn it off during a call (to make
a note of a number for example)
touch and select DTMF off.
Viewing your call logs
TIP! To scroll through a list of
options, touch the last item
visible and slide your nger up
the screen. The list will move up
to display more items.
Touch and tap in the
Communication menu.
Choose to view:
All - View a complete list of all
your dialled, received and missed
calls.
Dialled - View a list of all the
numbers you have called.