LG TONE-FP8 User manual
1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
OWNER’S MANUAL
Bluetooth®LG Stereo Headset
TONE-FP8
TONE-FP8W
TONE-FP8E Copyright © 2021 LG Electronics Inc. All Rights Reserved
Google Play App Store
www.lg.com
NOTE: For the best performance and
to prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Rev 1.0 IN
[Charging Case]
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to the
ambient sound so that you can recognize the surrounding situation and any
potential risks.
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient sound.
So, you can use the function to listen to the music or watch a video without
interference.
[Earbuds]
*Make sure that the charging terminal is not soiled with foreign substance.
*The appearance and specications of the actual product may differ depending
on the model.
1. Overview
6. Listen to the Ambient Sound (LAS) / Active Noise Cancellation (ANC)
2. How to pair 3. Wearing Earbuds
NOTE: Actual product design may differ from images shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
Make sure authentic LG Electronics components are used. Using a non-
authentic component may damage the product and thus void the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
Charging port
Charging terminals
UVnano LED
Mood light
(When you open the
charging case, the mood
light turns on and off.)
UVnano LED
Battery Status Indicator (up)
UVnano Indicator (down)
Speaker mesh
(Microphone)
Microphone
Microphone
Touchpad
Touchpad
Charging terminals
Charging terminals
Speaker mesh
(Microphone)
-(
-(
#MVFUPPUI 0/
~1m
Turn on the Bluetooth function on the mobile phone or the device to be
connected.
Open the cover of the charging case with the earbuds mounted on the case.
Press and hold the touchpad of the left or right earbud for 3 to 5 seconds
until the battery status indicator blinks in blue.
-(
-(
-(
-(50/&'1
-(
-(50/&'1
#MVFUPPUI
When the Fast Pair connection pop-up appears on the top area of the
mobile phone screen, tap it to connect. (It only supports Android™ 6.0
or higher, and requires conguring Bluetooth and location information
settings of the mobile device.)
If the pop-up does not appear, select [LG-TONE-FP8] from the
Bluetooth menu on the mobile phone and connect it (for users of iOS or
Android 5.0 or lower versions).
!
CAUTION: In the list of Bluetooth connected devices, LG-TONE-FP8_LE
is not the correct model name for connection. Check the model name in
use and connect with the model name without “LE”.
If the earbud model name is abnormally displayed on the Android device,
change the model name in the Bluetooth menu of Connected Device
Settings.
NOTE: To connect with another device, perform the above procedure again.
Automatic Reconnection
The earbuds are connected automatically when you open the cover of the
charging case. If you close the cover of the charging case with both earbuds
mounted in the charging case, the earbuds are disconnected.
Separate the earbuds from the charging case and adjust them so that
they t comfortably in your ears.
NOTE: You can use ear gels that t your ears to improve
Active Noise Canceling (ANC) performance and enjoy
rich music sound.
When you wear the earbuds, you will hear a wearing detection alarm.
4. Playing Music
5. Mobile Calling Functions 7. UVnano 8. Charging 9. Checking the Battery Status
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting
the Volume
: Touch the left(Decrease volume) or
right(Increase volume) earbud twice.
Play Next : Touch the left or right earbud three times.
NOTE: You can change the operation method of the function in the
touchpad settings of the LG TONE Free app.
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired after
mounting them on the charging case
and closing the cover, the UVnano
LED operates for 5 minutes.
*UVnano is a compound word
derived from the words UV and its
unit, nanometer.
NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano charging case eliminates up to 99.9% of harmful
bacteria inside the earbud hole.
In the case of a white product, discolouring may occur in the
contact area of the UVnano LED, but it does not affect the product
function.
!
CAUTION: Be aware that the temperature of the earbuds may rise
while the UVnano LED is on.
[Wired Charging]
When the charging cable is connected, the charging status is displayed in the
charging case.
NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power
to mobile phones, etc.
If earbuds are mounted in the charging case, the earbuds’ battery status is
displayed. Otherwise, the charging case’s battery status is displayed.
If the earbuds are mounted in the charging case while plugged in, the
UVnano process will commence for 5 minutes. Once this process is
complete, the charging case’s battery status will be displayed.
Battery
Status
Indicator
Remaining Battery
(charger not
connected)
Charging State
(charger
connected)
Red 20% or lower Charging
Yellow 20% - 80% -
Green 80% or higher Fully charged
NOTE: When the charging case lid is closed, charging case battery
status is displayed. If the charging case has no remaining charge, there
will be no display and it cannot function. We recommend you keep the
charging case charged at all times as the earbuds are not able to be
turned on and turned off independently.
Touch and hold the left or right earbud to switch between the ANC mode
and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
You can congure the Listen to the Ambient Sound mode and Conversation
mode using the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing
the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music,
or being on the phone.
*ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient
sound become loud suddenly.
When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
Function Status Description
Answering
Calls Ringing Touch the left or right earbud once.
Ending Calls Talking Touch the left or right earbud twice.
Making Calls Idle If you make a call using a mobile phone, the
call is automatically connected to the headset.
Receiving
Calls while on
the Phone
Talking
If you touch the left or right earbud once,
the current call will go on hold, and you will
be able to answer an incoming call.
If the previous call is on hold, you can nish
the current call on the mobile phone.
(It works differently depending on the
mobile phone settings.)
Rejecting
Calls Ringing Touch and hold the left or right earbud.
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
NOTE: The wireless charger is not provided. The wireless charging
function may not work in some wireless chargers. Wireless charging
feature charges at a slower rate due to less power being transmitted
to the charging case.
If you do wireless charging, the UVnano LED sterilizes the earbuds for
5 minutes before charging.
LG TONE Free™
Earbuds
UV Charging Case
USB Type C™
Charging Cable
Warranty Card
Extra Ear Gels
(small & large)
Owner’s Manual
1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
OWNER’S MANUAL
Bluetooth®LG Stereo Headset
TONE-FP8
TONE-FP8W
TONE-FP8E Copyright © 2021 LG Electronics Inc. All Rights Reserved
Google Play App Store
www.lg.com
NOTE: For the best performance and
to prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Rev 1.0 IN
[Charging Case]
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to the
ambient sound so that you can recognize the surrounding situation and any
potential risks.
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient sound.
So, you can use the function to listen to the music or watch a video without
interference.
[Earbuds]
*Make sure that the charging terminal is not soiled with foreign substance.
*The appearance and specications of the actual product may differ depending
on the model.
1. Overview
6. Listen to the Ambient Sound (LAS) / Active Noise Cancellation (ANC)
2. How to pair 3. Wearing Earbuds
NOTE: Actual product design may differ from images shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
Make sure authentic LG Electronics components are used. Using a non-
authentic component may damage the product and thus void the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
Charging port
Charging terminals
UVnano LED
Mood light
(When you open the
charging case, the mood
light turns on and off.)
UVnano LED
Battery Status Indicator (up)
UVnano Indicator (down)
Speaker mesh
(Microphone)
Microphone
Microphone
Touchpad
Touchpad
Charging terminals
Charging terminals
Speaker mesh
(Microphone)
-(
-(
#MVFUPPUI 0/
~1m
Turn on the Bluetooth function on the mobile phone or the device to be
connected.
Open the cover of the charging case with the earbuds mounted on the case.
Press and hold the touchpad of the left or right earbud for 3 to 5 seconds
until the battery status indicator blinks in blue.
-(
-(
-(
-(50/&'1
-(
-(50/&'1
#MVFUPPUI
When the Fast Pair connection pop-up appears on the top area of the
mobile phone screen, tap it to connect. (It only supports Android™ 6.0
or higher, and requires conguring Bluetooth and location information
settings of the mobile device.)
If the pop-up does not appear, select [LG-TONE-FP8] from the
Bluetooth menu on the mobile phone and connect it (for users of iOS or
Android 5.0 or lower versions).
!
CAUTION: In the list of Bluetooth connected devices, LG-TONE-FP8_LE
is not the correct model name for connection. Check the model name in
use and connect with the model name without “LE”.
If the earbud model name is abnormally displayed on the Android device,
change the model name in the Bluetooth menu of Connected Device
Settings.
NOTE: To connect with another device, perform the above procedure again.
Automatic Reconnection
The earbuds are connected automatically when you open the cover of the
charging case. If you close the cover of the charging case with both earbuds
mounted in the charging case, the earbuds are disconnected.
Separate the earbuds from the charging case and adjust them so that
they t comfortably in your ears.
NOTE: You can use ear gels that t your ears to improve
Active Noise Canceling (ANC) performance and enjoy
rich music sound.
When you wear the earbuds, you will hear a wearing detection alarm.
4. Playing Music
5. Mobile Calling Functions 7. UVnano 8. Charging 9. Checking the Battery Status
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting
the Volume
: Touch the left(Decrease volume) or
right(Increase volume) earbud twice.
Play Next : Touch the left or right earbud three times.
NOTE: You can change the operation method of the function in the
touchpad settings of the LG TONE Free app.
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired after
mounting them on the charging case
and closing the cover, the UVnano
LED operates for 5 minutes.
*UVnano is a compound word
derived from the words UV and its
unit, nanometer.
NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano charging case eliminates up to 99.9% of harmful
bacteria inside the earbud hole.
In the case of a white product, discolouring may occur in the
contact area of the UVnano LED, but it does not affect the product
function.
!
CAUTION: Be aware that the temperature of the earbuds may rise
while the UVnano LED is on.
[Wired Charging]
When the charging cable is connected, the charging status is displayed in the
charging case.
NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power
to mobile phones, etc.
If earbuds are mounted in the charging case, the earbuds’ battery status is
displayed. Otherwise, the charging case’s battery status is displayed.
If the earbuds are mounted in the charging case while plugged in, the
UVnano process will commence for 5 minutes. Once this process is
complete, the charging case’s battery status will be displayed.
Battery
Status
Indicator
Remaining Battery
(charger not
connected)
Charging State
(charger
connected)
Red 20% or lower Charging
Yellow 20% - 80% -
Green 80% or higher Fully charged
NOTE: When the charging case lid is closed, charging case battery
status is displayed. If the charging case has no remaining charge, there
will be no display and it cannot function. We recommend you keep the
charging case charged at all times as the earbuds are not able to be
turned on and turned off independently.
Touch and hold the left or right earbud to switch between the ANC mode
and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
You can congure the Listen to the Ambient Sound mode and Conversation
mode using the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing
the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music,
or being on the phone.
*ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient
sound become loud suddenly.
When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
Function Status Description
Answering
Calls Ringing Touch the left or right earbud once.
Ending Calls Talking Touch the left or right earbud twice.
Making Calls Idle If you make a call using a mobile phone, the
call is automatically connected to the headset.
Receiving
Calls while on
the Phone
Talking
If you touch the left or right earbud once,
the current call will go on hold, and you will
be able to answer an incoming call.
If the previous call is on hold, you can nish
the current call on the mobile phone.
(It works differently depending on the
mobile phone settings.)
Rejecting
Calls Ringing Touch and hold the left or right earbud.
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
NOTE: The wireless charger is not provided. The wireless charging
function may not work in some wireless chargers. Wireless charging
feature charges at a slower rate due to less power being transmitted
to the charging case.
If you do wireless charging, the UVnano LED sterilizes the earbuds for
5 minutes before charging.
LG TONE Free™
Earbuds
UV Charging Case
USB Type C™
Charging Cable
Warranty Card
Extra Ear Gels
(small & large)
Owner’s Manual
1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
OWNER’S MANUAL
Bluetooth®LG Stereo Headset
TONE-FP8
TONE-FP8W
TONE-FP8E Copyright © 2021 LG Electronics Inc. All Rights Reserved
Google Play App Store
www.lg.com
NOTE: For the best performance and
to prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Rev 1.0 IN
[Charging Case]
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to the
ambient sound so that you can recognize the surrounding situation and any
potential risks.
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient sound.
So, you can use the function to listen to the music or watch a video without
interference.
[Earbuds]
*Make sure that the charging terminal is not soiled with foreign substance.
*The appearance and specications of the actual product may differ depending
on the model.
1. Overview
6. Listen to the Ambient Sound (LAS) / Active Noise Cancellation (ANC)
2. How to pair 3. Wearing Earbuds
NOTE: Actual product design may differ from images shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
Make sure authentic LG Electronics components are used. Using a non-
authentic component may damage the product and thus void the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
Charging port
Charging terminals
UVnano LED
Mood light
(When you open the
charging case, the mood
light turns on and off.)
UVnano LED
Battery Status Indicator (up)
UVnano Indicator (down)
Speaker mesh
(Microphone)
Microphone
Microphone
Touchpad
Touchpad
Charging terminals
Charging terminals
Speaker mesh
(Microphone)
-(
-(
#MVFUPPUI 0/
~1m
Turn on the Bluetooth function on the mobile phone or the device to be
connected.
Open the cover of the charging case with the earbuds mounted on the case.
Press and hold the touchpad of the left or right earbud for 3 to 5 seconds
until the battery status indicator blinks in blue.
-(
-(
-(
-(50/&'1
-(
-(50/&'1
#MVFUPPUI
When the Fast Pair connection pop-up appears on the top area of the
mobile phone screen, tap it to connect. (It only supports Android™ 6.0
or higher, and requires conguring Bluetooth and location information
settings of the mobile device.)
If the pop-up does not appear, select [LG-TONE-FP8] from the
Bluetooth menu on the mobile phone and connect it (for users of iOS or
Android 5.0 or lower versions).
!
CAUTION: In the list of Bluetooth connected devices, LG-TONE-FP8_LE
is not the correct model name for connection. Check the model name in
use and connect with the model name without “LE”.
If the earbud model name is abnormally displayed on the Android device,
change the model name in the Bluetooth menu of Connected Device
Settings.
NOTE: To connect with another device, perform the above procedure again.
Automatic Reconnection
The earbuds are connected automatically when you open the cover of the
charging case. If you close the cover of the charging case with both earbuds
mounted in the charging case, the earbuds are disconnected.
Separate the earbuds from the charging case and adjust them so that
they t comfortably in your ears.
NOTE: You can use ear gels that t your ears to improve
Active Noise Canceling (ANC) performance and enjoy
rich music sound.
When you wear the earbuds, you will hear a wearing detection alarm.
4. Playing Music
5. Mobile Calling Functions 7. UVnano 8. Charging 9. Checking the Battery Status
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting
the Volume
: Touch the left(Decrease volume) or
right(Increase volume) earbud twice.
Play Next : Touch the left or right earbud three times.
NOTE: You can change the operation method of the function in the
touchpad settings of the LG TONE Free app.
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired after
mounting them on the charging case
and closing the cover, the UVnano
LED operates for 5 minutes.
*UVnano is a compound word
derived from the words UV and its
unit, nanometer.
NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano charging case eliminates up to 99.9% of harmful
bacteria inside the earbud hole.
In the case of a white product, discolouring may occur in the
contact area of the UVnano LED, but it does not affect the product
function.
!
CAUTION: Be aware that the temperature of the earbuds may rise
while the UVnano LED is on.
[Wired Charging]
When the charging cable is connected, the charging status is displayed in the
charging case.
NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power
to mobile phones, etc.
If earbuds are mounted in the charging case, the earbuds’ battery status is
displayed. Otherwise, the charging case’s battery status is displayed.
If the earbuds are mounted in the charging case while plugged in, the
UVnano process will commence for 5 minutes. Once this process is
complete, the charging case’s battery status will be displayed.
Battery
Status
Indicator
Remaining Battery
(charger not
connected)
Charging State
(charger
connected)
Red 20% or lower Charging
Yellow 20% - 80% -
Green 80% or higher Fully charged
NOTE: When the charging case lid is closed, charging case battery
status is displayed. If the charging case has no remaining charge, there
will be no display and it cannot function. We recommend you keep the
charging case charged at all times as the earbuds are not able to be
turned on and turned off independently.
Touch and hold the left or right earbud to switch between the ANC mode
and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
You can congure the Listen to the Ambient Sound mode and Conversation
mode using the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing
the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music,
or being on the phone.
*ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient
sound become loud suddenly.
When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
Function Status Description
Answering
Calls Ringing Touch the left or right earbud once.
Ending Calls Talking Touch the left or right earbud twice.
Making Calls Idle If you make a call using a mobile phone, the
call is automatically connected to the headset.
Receiving
Calls while on
the Phone
Talking
If you touch the left or right earbud once,
the current call will go on hold, and you will
be able to answer an incoming call.
If the previous call is on hold, you can nish
the current call on the mobile phone.
(It works differently depending on the
mobile phone settings.)
Rejecting
Calls Ringing Touch and hold the left or right earbud.
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
NOTE: The wireless charger is not provided. The wireless charging
function may not work in some wireless chargers. Wireless charging
feature charges at a slower rate due to less power being transmitted
to the charging case.
If you do wireless charging, the UVnano LED sterilizes the earbuds for
5 minutes before charging.
LG TONE Free™
Earbuds
UV Charging Case
USB Type C™
Charging Cable
Warranty Card
Extra Ear Gels
(small & large)
Owner’s Manual
1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
OWNER’S MANUAL
Bluetooth®LG Stereo Headset
TONE-FP8
TONE-FP8W
TONE-FP8E Copyright © 2021 LG Electronics Inc. All Rights Reserved
Google Play App Store
www.lg.com
NOTE: For the best performance and
to prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Rev 1.0 IN
[Charging Case]
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to the
ambient sound so that you can recognize the surrounding situation and any
potential risks.
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient sound.
So, you can use the function to listen to the music or watch a video without
interference.
[Earbuds]
*Make sure that the charging terminal is not soiled with foreign substance.
*The appearance and specications of the actual product may differ depending
on the model.
1. Overview
6. Listen to the Ambient Sound (LAS) / Active Noise Cancellation (ANC)
2. How to pair 3. Wearing Earbuds
NOTE: Actual product design may differ from images shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
Make sure authentic LG Electronics components are used. Using a non-
authentic component may damage the product and thus void the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
Charging port
Charging terminals
UVnano LED
Mood light
(When you open the
charging case, the mood
light turns on and off.)
UVnano LED
Battery Status Indicator (up)
UVnano Indicator (down)
Speaker mesh
(Microphone)
Microphone
Microphone
Touchpad
Touchpad
Charging terminals
Charging terminals
Speaker mesh
(Microphone)
-(
-(
#MVFUPPUI 0/
~1m
Turn on the Bluetooth function on the mobile phone or the device to be
connected.
Open the cover of the charging case with the earbuds mounted on the case.
Press and hold the touchpad of the left or right earbud for 3 to 5 seconds
until the battery status indicator blinks in blue.
-(
-(
-(
-(50/&'1
-(
-(50/&'1
#MVFUPPUI
When the Fast Pair connection pop-up appears on the top area of the
mobile phone screen, tap it to connect. (It only supports Android™ 6.0
or higher, and requires conguring Bluetooth and location information
settings of the mobile device.)
If the pop-up does not appear, select [LG-TONE-FP8] from the
Bluetooth menu on the mobile phone and connect it (for users of iOS or
Android 5.0 or lower versions).
!
CAUTION: In the list of Bluetooth connected devices, LG-TONE-FP8_LE
is not the correct model name for connection. Check the model name in
use and connect with the model name without “LE”.
If the earbud model name is abnormally displayed on the Android device,
change the model name in the Bluetooth menu of Connected Device
Settings.
NOTE: To connect with another device, perform the above procedure again.
Automatic Reconnection
The earbuds are connected automatically when you open the cover of the
charging case. If you close the cover of the charging case with both earbuds
mounted in the charging case, the earbuds are disconnected.
Separate the earbuds from the charging case and adjust them so that
they t comfortably in your ears.
NOTE: You can use ear gels that t your ears to improve
Active Noise Canceling (ANC) performance and enjoy
rich music sound.
When you wear the earbuds, you will hear a wearing detection alarm.
4. Playing Music
5. Mobile Calling Functions 7. UVnano 8. Charging 9. Checking the Battery Status
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting
the Volume
: Touch the left(Decrease volume) or
right(Increase volume) earbud twice.
Play Next : Touch the left or right earbud three times.
NOTE: You can change the operation method of the function in the
touchpad settings of the LG TONE Free app.
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired after
mounting them on the charging case
and closing the cover, the UVnano
LED operates for 5 minutes.
*UVnano is a compound word
derived from the words UV and its
unit, nanometer.
NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano charging case eliminates up to 99.9% of harmful
bacteria inside the earbud hole.
In the case of a white product, discolouring may occur in the
contact area of the UVnano LED, but it does not affect the product
function.
!
CAUTION: Be aware that the temperature of the earbuds may rise
while the UVnano LED is on.
[Wired Charging]
When the charging cable is connected, the charging status is displayed in the
charging case.
NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power
to mobile phones, etc.
If earbuds are mounted in the charging case, the earbuds’ battery status is
displayed. Otherwise, the charging case’s battery status is displayed.
If the earbuds are mounted in the charging case while plugged in, the
UVnano process will commence for 5 minutes. Once this process is
complete, the charging case’s battery status will be displayed.
Battery
Status
Indicator
Remaining Battery
(charger not
connected)
Charging State
(charger
connected)
Red 20% or lower Charging
Yellow 20% - 80% -
Green 80% or higher Fully charged
NOTE: When the charging case lid is closed, charging case battery
status is displayed. If the charging case has no remaining charge, there
will be no display and it cannot function. We recommend you keep the
charging case charged at all times as the earbuds are not able to be
turned on and turned off independently.
Touch and hold the left or right earbud to switch between the ANC mode
and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
You can congure the Listen to the Ambient Sound mode and Conversation
mode using the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing
the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music,
or being on the phone.
*ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient
sound become loud suddenly.
When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
Function Status Description
Answering
Calls Ringing Touch the left or right earbud once.
Ending Calls Talking Touch the left or right earbud twice.
Making Calls Idle If you make a call using a mobile phone, the
call is automatically connected to the headset.
Receiving
Calls while on
the Phone
Talking
If you touch the left or right earbud once,
the current call will go on hold, and you will
be able to answer an incoming call.
If the previous call is on hold, you can nish
the current call on the mobile phone.
(It works differently depending on the
mobile phone settings.)
Rejecting
Calls Ringing Touch and hold the left or right earbud.
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
NOTE: The wireless charger is not provided. The wireless charging
function may not work in some wireless chargers. Wireless charging
feature charges at a slower rate due to less power being transmitted
to the charging case.
If you do wireless charging, the UVnano LED sterilizes the earbuds for
5 minutes before charging.
LG TONE Free™
Earbuds
UV Charging Case
USB Type C™
Charging Cable
Warranty Card
Extra Ear Gels
(small & large)
Owner’s Manual
1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
OWNER’S MANUAL
Bluetooth®LG Stereo Headset
TONE-FP8
TONE-FP8W
TONE-FP8E Copyright © 2021 LG Electronics Inc. All Rights Reserved
Google Play App Store
www.lg.com
NOTE: For the best performance and
to prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Rev 1.0 IN
[Charging Case]
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to the
ambient sound so that you can recognize the surrounding situation and any
potential risks.
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient sound.
So, you can use the function to listen to the music or watch a video without
interference.
[Earbuds]
*Make sure that the charging terminal is not soiled with foreign substance.
*The appearance and specications of the actual product may differ depending
on the model.
1. Overview
6. Listen to the Ambient Sound (LAS) / Active Noise Cancellation (ANC)
2. How to pair 3. Wearing Earbuds
NOTE: Actual product design may differ from images shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
Make sure authentic LG Electronics components are used. Using a non-
authentic component may damage the product and thus void the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
Charging port
Charging terminals
UVnano LED
Mood light
(When you open the
charging case, the mood
light turns on and off.)
UVnano LED
Battery Status Indicator (up)
UVnano Indicator (down)
Speaker mesh
(Microphone)
Microphone
Microphone
Touchpad
Touchpad
Charging terminals
Charging terminals
Speaker mesh
(Microphone)
-(
-(
#MVFUPPUI 0/
~1m
Turn on the Bluetooth function on the mobile phone or the device to be
connected.
Open the cover of the charging case with the earbuds mounted on the case.
Press and hold the touchpad of the left or right earbud for 3 to 5 seconds
until the battery status indicator blinks in blue.
-(
-(
-(
-(50/&'1
-(
-(50/&'1
#MVFUPPUI
When the Fast Pair connection pop-up appears on the top area of the
mobile phone screen, tap it to connect. (It only supports Android™ 6.0
or higher, and requires conguring Bluetooth and location information
settings of the mobile device.)
If the pop-up does not appear, select [LG-TONE-FP8] from the
Bluetooth menu on the mobile phone and connect it (for users of iOS or
Android 5.0 or lower versions).
!
CAUTION: In the list of Bluetooth connected devices, LG-TONE-FP8_LE
is not the correct model name for connection. Check the model name in
use and connect with the model name without “LE”.
If the earbud model name is abnormally displayed on the Android device,
change the model name in the Bluetooth menu of Connected Device
Settings.
NOTE: To connect with another device, perform the above procedure again.
Automatic Reconnection
The earbuds are connected automatically when you open the cover of the
charging case. If you close the cover of the charging case with both earbuds
mounted in the charging case, the earbuds are disconnected.
Separate the earbuds from the charging case and adjust them so that
they t comfortably in your ears.
NOTE: You can use ear gels that t your ears to improve
Active Noise Canceling (ANC) performance and enjoy
rich music sound.
When you wear the earbuds, you will hear a wearing detection alarm.
4. Playing Music
5. Mobile Calling Functions 7. UVnano 8. Charging 9. Checking the Battery Status
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting
the Volume
: Touch the left(Decrease volume) or
right(Increase volume) earbud twice.
Play Next : Touch the left or right earbud three times.
NOTE: You can change the operation method of the function in the
touchpad settings of the LG TONE Free app.
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired after
mounting them on the charging case
and closing the cover, the UVnano
LED operates for 5 minutes.
*UVnano is a compound word
derived from the words UV and its
unit, nanometer.
NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano charging case eliminates up to 99.9% of harmful
bacteria inside the earbud hole.
In the case of a white product, discolouring may occur in the
contact area of the UVnano LED, but it does not affect the product
function.
!
CAUTION: Be aware that the temperature of the earbuds may rise
while the UVnano LED is on.
[Wired Charging]
When the charging cable is connected, the charging status is displayed in the
charging case.
NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power
to mobile phones, etc.
If earbuds are mounted in the charging case, the earbuds’ battery status is
displayed. Otherwise, the charging case’s battery status is displayed.
If the earbuds are mounted in the charging case while plugged in, the
UVnano process will commence for 5 minutes. Once this process is
complete, the charging case’s battery status will be displayed.
Battery
Status
Indicator
Remaining Battery
(charger not
connected)
Charging State
(charger
connected)
Red 20% or lower Charging
Yellow 20% - 80% -
Green 80% or higher Fully charged
NOTE: When the charging case lid is closed, charging case battery
status is displayed. If the charging case has no remaining charge, there
will be no display and it cannot function. We recommend you keep the
charging case charged at all times as the earbuds are not able to be
turned on and turned off independently.
Touch and hold the left or right earbud to switch between the ANC mode
and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
You can congure the Listen to the Ambient Sound mode and Conversation
mode using the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing
the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music,
or being on the phone.
*ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient
sound become loud suddenly.
When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
Function Status Description
Answering
Calls Ringing Touch the left or right earbud once.
Ending Calls Talking Touch the left or right earbud twice.
Making Calls Idle If you make a call using a mobile phone, the
call is automatically connected to the headset.
Receiving
Calls while on
the Phone
Talking
If you touch the left or right earbud once,
the current call will go on hold, and you will
be able to answer an incoming call.
If the previous call is on hold, you can nish
the current call on the mobile phone.
(It works differently depending on the
mobile phone settings.)
Rejecting
Calls Ringing Touch and hold the left or right earbud.
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
NOTE: The wireless charger is not provided. The wireless charging
function may not work in some wireless chargers. Wireless charging
feature charges at a slower rate due to less power being transmitted
to the charging case.
If you do wireless charging, the UVnano LED sterilizes the earbuds for
5 minutes before charging.
LG TONE Free™
Earbuds
UV Charging Case
USB Type C™
Charging Cable
Warranty Card
Extra Ear Gels
(small & large)
Owner’s Manual
1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
OWNER’S MANUAL
Bluetooth®LG Stereo Headset
TONE-FP8
TONE-FP8W
TONE-FP8E Copyright © 2021 LG Electronics Inc. All Rights Reserved
Google Play App Store
www.lg.com
NOTE: For the best performance and
to prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Rev 1.0 IN
[Charging Case]
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to the
ambient sound so that you can recognize the surrounding situation and any
potential risks.
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient sound.
So, you can use the function to listen to the music or watch a video without
interference.
[Earbuds]
*Make sure that the charging terminal is not soiled with foreign substance.
*The appearance and specications of the actual product may differ depending
on the model.
1. Overview
6. Listen to the Ambient Sound (LAS) / Active Noise Cancellation (ANC)
2. How to pair 3. Wearing Earbuds
NOTE: Actual product design may differ from images shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
Make sure authentic LG Electronics components are used. Using a non-
authentic component may damage the product and thus void the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
Charging port
Charging terminals
UVnano LED
Mood light
(When you open the
charging case, the mood
light turns on and off.)
UVnano LED
Battery Status Indicator (up)
UVnano Indicator (down)
Speaker mesh
(Microphone)
Microphone
Microphone
Touchpad
Touchpad
Charging terminals
Charging terminals
Speaker mesh
(Microphone)
-(
-(
#MVFUPPUI 0/
~1m
Turn on the Bluetooth function on the mobile phone or the device to be
connected.
Open the cover of the charging case with the earbuds mounted on the case.
Press and hold the touchpad of the left or right earbud for 3 to 5 seconds
until the battery status indicator blinks in blue.
-(
-(
-(
-(50/&'1
-(
-(50/&'1
#MVFUPPUI
When the Fast Pair connection pop-up appears on the top area of the
mobile phone screen, tap it to connect. (It only supports Android™ 6.0
or higher, and requires conguring Bluetooth and location information
settings of the mobile device.)
If the pop-up does not appear, select [LG-TONE-FP8] from the
Bluetooth menu on the mobile phone and connect it (for users of iOS or
Android 5.0 or lower versions).
!
CAUTION: In the list of Bluetooth connected devices, LG-TONE-FP8_LE
is not the correct model name for connection. Check the model name in
use and connect with the model name without “LE”.
If the earbud model name is abnormally displayed on the Android device,
change the model name in the Bluetooth menu of Connected Device
Settings.
NOTE: To connect with another device, perform the above procedure again.
Automatic Reconnection
The earbuds are connected automatically when you open the cover of the
charging case. If you close the cover of the charging case with both earbuds
mounted in the charging case, the earbuds are disconnected.
Separate the earbuds from the charging case and adjust them so that
they t comfortably in your ears.
NOTE: You can use ear gels that t your ears to improve
Active Noise Canceling (ANC) performance and enjoy
rich music sound.
When you wear the earbuds, you will hear a wearing detection alarm.
4. Playing Music
5. Mobile Calling Functions 7. UVnano 8. Charging 9. Checking the Battery Status
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting
the Volume
: Touch the left(Decrease volume) or
right(Increase volume) earbud twice.
Play Next : Touch the left or right earbud three times.
NOTE: You can change the operation method of the function in the
touchpad settings of the LG TONE Free app.
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired after
mounting them on the charging case
and closing the cover, the UVnano
LED operates for 5 minutes.
*UVnano is a compound word
derived from the words UV and its
unit, nanometer.
NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano charging case eliminates up to 99.9% of harmful
bacteria inside the earbud hole.
In the case of a white product, discolouring may occur in the
contact area of the UVnano LED, but it does not affect the product
function.
!
CAUTION: Be aware that the temperature of the earbuds may rise
while the UVnano LED is on.
[Wired Charging]
When the charging cable is connected, the charging status is displayed in the
charging case.
NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power
to mobile phones, etc.
If earbuds are mounted in the charging case, the earbuds’ battery status is
displayed. Otherwise, the charging case’s battery status is displayed.
If the earbuds are mounted in the charging case while plugged in, the
UVnano process will commence for 5 minutes. Once this process is
complete, the charging case’s battery status will be displayed.
Battery
Status
Indicator
Remaining Battery
(charger not
connected)
Charging State
(charger
connected)
Red 20% or lower Charging
Yellow 20% - 80% -
Green 80% or higher Fully charged
NOTE: When the charging case lid is closed, charging case battery
status is displayed. If the charging case has no remaining charge, there
will be no display and it cannot function. We recommend you keep the
charging case charged at all times as the earbuds are not able to be
turned on and turned off independently.
Touch and hold the left or right earbud to switch between the ANC mode
and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
You can congure the Listen to the Ambient Sound mode and Conversation
mode using the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing
the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music,
or being on the phone.
*ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient
sound become loud suddenly.
When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
Function Status Description
Answering
Calls Ringing Touch the left or right earbud once.
Ending Calls Talking Touch the left or right earbud twice.
Making Calls Idle If you make a call using a mobile phone, the
call is automatically connected to the headset.
Receiving
Calls while on
the Phone
Talking
If you touch the left or right earbud once,
the current call will go on hold, and you will
be able to answer an incoming call.
If the previous call is on hold, you can nish
the current call on the mobile phone.
(It works differently depending on the
mobile phone settings.)
Rejecting
Calls Ringing Touch and hold the left or right earbud.
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
NOTE: The wireless charger is not provided. The wireless charging
function may not work in some wireless chargers. Wireless charging
feature charges at a slower rate due to less power being transmitted
to the charging case.
If you do wireless charging, the UVnano LED sterilizes the earbuds for
5 minutes before charging.
LG TONE Free™
Earbuds
UV Charging Case
USB Type C™
Charging Cable
Warranty Card
Extra Ear Gels
(small & large)
Owner’s Manual
1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
OWNER’S MANUAL
Bluetooth®LG Stereo Headset
TONE-FP8
TONE-FP8W
TONE-FP8E Copyright © 2021 LG Electronics Inc. All Rights Reserved
Google Play App Store
www.lg.com
NOTE: For the best performance and
to prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Rev 1.0 IN
[Charging Case]
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to the
ambient sound so that you can recognize the surrounding situation and any
potential risks.
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient sound.
So, you can use the function to listen to the music or watch a video without
interference.
[Earbuds]
*Make sure that the charging terminal is not soiled with foreign substance.
*The appearance and specications of the actual product may differ depending
on the model.
1. Overview
6. Listen to the Ambient Sound (LAS) / Active Noise Cancellation (ANC)
2. How to pair 3. Wearing Earbuds
NOTE: Actual product design may differ from images shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
Make sure authentic LG Electronics components are used. Using a non-
authentic component may damage the product and thus void the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
Charging port
Charging terminals
UVnano LED
Mood light
(When you open the
charging case, the mood
light turns on and off.)
UVnano LED
Battery Status Indicator (up)
UVnano Indicator (down)
Speaker mesh
(Microphone)
Microphone
Microphone
Touchpad
Touchpad
Charging terminals
Charging terminals
Speaker mesh
(Microphone)
-(
-(
#MVFUPPUI 0/
~1m
Turn on the Bluetooth function on the mobile phone or the device to be
connected.
Open the cover of the charging case with the earbuds mounted on the case.
Press and hold the touchpad of the left or right earbud for 3 to 5 seconds
until the battery status indicator blinks in blue.
-(
-(
-(
-(50/&'1
-(
-(50/&'1
#MVFUPPUI
When the Fast Pair connection pop-up appears on the top area of the
mobile phone screen, tap it to connect. (It only supports Android™ 6.0
or higher, and requires conguring Bluetooth and location information
settings of the mobile device.)
If the pop-up does not appear, select [LG-TONE-FP8] from the
Bluetooth menu on the mobile phone and connect it (for users of iOS or
Android 5.0 or lower versions).
!
CAUTION: In the list of Bluetooth connected devices, LG-TONE-FP8_LE
is not the correct model name for connection. Check the model name in
use and connect with the model name without “LE”.
If the earbud model name is abnormally displayed on the Android device,
change the model name in the Bluetooth menu of Connected Device
Settings.
NOTE: To connect with another device, perform the above procedure again.
Automatic Reconnection
The earbuds are connected automatically when you open the cover of the
charging case. If you close the cover of the charging case with both earbuds
mounted in the charging case, the earbuds are disconnected.
Separate the earbuds from the charging case and adjust them so that
they t comfortably in your ears.
NOTE: You can use ear gels that t your ears to improve
Active Noise Canceling (ANC) performance and enjoy
rich music sound.
When you wear the earbuds, you will hear a wearing detection alarm.
4. Playing Music
5. Mobile Calling Functions 7. UVnano 8. Charging 9. Checking the Battery Status
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting
the Volume
: Touch the left(Decrease volume) or
right(Increase volume) earbud twice.
Play Next : Touch the left or right earbud three times.
NOTE: You can change the operation method of the function in the
touchpad settings of the LG TONE Free app.
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired after
mounting them on the charging case
and closing the cover, the UVnano
LED operates for 5 minutes.
*UVnano is a compound word
derived from the words UV and its
unit, nanometer.
NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano charging case eliminates up to 99.9% of harmful
bacteria inside the earbud hole.
In the case of a white product, discolouring may occur in the
contact area of the UVnano LED, but it does not affect the product
function.
!
CAUTION: Be aware that the temperature of the earbuds may rise
while the UVnano LED is on.
[Wired Charging]
When the charging cable is connected, the charging status is displayed in the
charging case.
NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power
to mobile phones, etc.
If earbuds are mounted in the charging case, the earbuds’ battery status is
displayed. Otherwise, the charging case’s battery status is displayed.
If the earbuds are mounted in the charging case while plugged in, the
UVnano process will commence for 5 minutes. Once this process is
complete, the charging case’s battery status will be displayed.
Battery
Status
Indicator
Remaining Battery
(charger not
connected)
Charging State
(charger
connected)
Red 20% or lower Charging
Yellow 20% - 80% -
Green 80% or higher Fully charged
NOTE: When the charging case lid is closed, charging case battery
status is displayed. If the charging case has no remaining charge, there
will be no display and it cannot function. We recommend you keep the
charging case charged at all times as the earbuds are not able to be
turned on and turned off independently.
Touch and hold the left or right earbud to switch between the ANC mode
and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
You can congure the Listen to the Ambient Sound mode and Conversation
mode using the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing
the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music,
or being on the phone.
*ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient
sound become loud suddenly.
When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
Function Status Description
Answering
Calls Ringing Touch the left or right earbud once.
Ending Calls Talking Touch the left or right earbud twice.
Making Calls Idle If you make a call using a mobile phone, the
call is automatically connected to the headset.
Receiving
Calls while on
the Phone
Talking
If you touch the left or right earbud once,
the current call will go on hold, and you will
be able to answer an incoming call.
If the previous call is on hold, you can nish
the current call on the mobile phone.
(It works differently depending on the
mobile phone settings.)
Rejecting
Calls Ringing Touch and hold the left or right earbud.
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
NOTE: The wireless charger is not provided. The wireless charging
function may not work in some wireless chargers. Wireless charging
feature charges at a slower rate due to less power being transmitted
to the charging case.
If you do wireless charging, the UVnano LED sterilizes the earbuds for
5 minutes before charging.
LG TONE Free™
Earbuds
UV Charging Case
USB Type C™
Charging Cable
Warranty Card
Extra Ear Gels
(small & large)
Owner’s Manual
1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
OWNER’S MANUAL
Bluetooth®LG Stereo Headset
TONE-FP8
TONE-FP8W
TONE-FP8E Copyright © 2021 LG Electronics Inc. All Rights Reserved
Google Play App Store
www.lg.com
NOTE: For the best performance and
to prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Rev 1.0 IN
[Charging Case]
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to the
ambient sound so that you can recognize the surrounding situation and any
potential risks.
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient sound.
So, you can use the function to listen to the music or watch a video without
interference.
[Earbuds]
*Make sure that the charging terminal is not soiled with foreign substance.
*The appearance and specications of the actual product may differ depending
on the model.
1. Overview
6. Listen to the Ambient Sound (LAS) / Active Noise Cancellation (ANC)
2. How to pair 3. Wearing Earbuds
NOTE: Actual product design may differ from images shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
Make sure authentic LG Electronics components are used. Using a non-
authentic component may damage the product and thus void the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
Charging port
Charging terminals
UVnano LED
Mood light
(When you open the
charging case, the mood
light turns on and off.)
UVnano LED
Battery Status Indicator (up)
UVnano Indicator (down)
Speaker mesh
(Microphone)
Microphone
Microphone
Touchpad
Touchpad
Charging terminals
Charging terminals
Speaker mesh
(Microphone)
-(
-(
#MVFUPPUI 0/
~1m
Turn on the Bluetooth function on the mobile phone or the device to be
connected.
Open the cover of the charging case with the earbuds mounted on the case.
Press and hold the touchpad of the left or right earbud for 3 to 5 seconds
until the battery status indicator blinks in blue.
-(
-(
-(
-(50/&'1
-(
-(50/&'1
#MVFUPPUI
When the Fast Pair connection pop-up appears on the top area of the
mobile phone screen, tap it to connect. (It only supports Android™ 6.0
or higher, and requires conguring Bluetooth and location information
settings of the mobile device.)
If the pop-up does not appear, select [LG-TONE-FP8] from the
Bluetooth menu on the mobile phone and connect it (for users of iOS or
Android 5.0 or lower versions).
!
CAUTION: In the list of Bluetooth connected devices, LG-TONE-FP8_LE
is not the correct model name for connection. Check the model name in
use and connect with the model name without “LE”.
If the earbud model name is abnormally displayed on the Android device,
change the model name in the Bluetooth menu of Connected Device
Settings.
NOTE: To connect with another device, perform the above procedure again.
Automatic Reconnection
The earbuds are connected automatically when you open the cover of the
charging case. If you close the cover of the charging case with both earbuds
mounted in the charging case, the earbuds are disconnected.
Separate the earbuds from the charging case and adjust them so that
they t comfortably in your ears.
NOTE: You can use ear gels that t your ears to improve
Active Noise Canceling (ANC) performance and enjoy
rich music sound.
When you wear the earbuds, you will hear a wearing detection alarm.
4. Playing Music
5. Mobile Calling Functions 7. UVnano 8. Charging 9. Checking the Battery Status
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting
the Volume
: Touch the left(Decrease volume) or
right(Increase volume) earbud twice.
Play Next : Touch the left or right earbud three times.
NOTE: You can change the operation method of the function in the
touchpad settings of the LG TONE Free app.
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired after
mounting them on the charging case
and closing the cover, the UVnano
LED operates for 5 minutes.
*UVnano is a compound word
derived from the words UV and its
unit, nanometer.
NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano charging case eliminates up to 99.9% of harmful
bacteria inside the earbud hole.
In the case of a white product, discolouring may occur in the
contact area of the UVnano LED, but it does not affect the product
function.
!
CAUTION: Be aware that the temperature of the earbuds may rise
while the UVnano LED is on.
[Wired Charging]
When the charging cable is connected, the charging status is displayed in the
charging case.
NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power
to mobile phones, etc.
If earbuds are mounted in the charging case, the earbuds’ battery status is
displayed. Otherwise, the charging case’s battery status is displayed.
If the earbuds are mounted in the charging case while plugged in, the
UVnano process will commence for 5 minutes. Once this process is
complete, the charging case’s battery status will be displayed.
Battery
Status
Indicator
Remaining Battery
(charger not
connected)
Charging State
(charger
connected)
Red 20% or lower Charging
Yellow 20% - 80% -
Green 80% or higher Fully charged
NOTE: When the charging case lid is closed, charging case battery
status is displayed. If the charging case has no remaining charge, there
will be no display and it cannot function. We recommend you keep the
charging case charged at all times as the earbuds are not able to be
turned on and turned off independently.
Touch and hold the left or right earbud to switch between the ANC mode
and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
You can congure the Listen to the Ambient Sound mode and Conversation
mode using the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing
the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music,
or being on the phone.
*ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient
sound become loud suddenly.
When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
Function Status Description
Answering
Calls Ringing Touch the left or right earbud once.
Ending Calls Talking Touch the left or right earbud twice.
Making Calls Idle If you make a call using a mobile phone, the
call is automatically connected to the headset.
Receiving
Calls while on
the Phone
Talking
If you touch the left or right earbud once,
the current call will go on hold, and you will
be able to answer an incoming call.
If the previous call is on hold, you can nish
the current call on the mobile phone.
(It works differently depending on the
mobile phone settings.)
Rejecting
Calls Ringing Touch and hold the left or right earbud.
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
NOTE: The wireless charger is not provided. The wireless charging
function may not work in some wireless chargers. Wireless charging
feature charges at a slower rate due to less power being transmitted
to the charging case.
If you do wireless charging, the UVnano LED sterilizes the earbuds for
5 minutes before charging.
LG TONE Free™
Earbuds
UV Charging Case
USB Type C™
Charging Cable
Warranty Card
Extra Ear Gels
(small & large)
Owner’s Manual
1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
OWNER’S MANUAL
Bluetooth®LG Stereo Headset
TONE-FP8
TONE-FP8W
TONE-FP8E Copyright © 2021 LG Electronics Inc. All Rights Reserved
Google Play App Store
www.lg.com
NOTE: For the best performance and
to prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Rev 1.0 IN
[Charging Case]
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to the
ambient sound so that you can recognize the surrounding situation and any
potential risks.
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient sound.
So, you can use the function to listen to the music or watch a video without
interference.
[Earbuds]
*Make sure that the charging terminal is not soiled with foreign substance.
*The appearance and specications of the actual product may differ depending
on the model.
1. Overview
6. Listen to the Ambient Sound (LAS) / Active Noise Cancellation (ANC)
2. How to pair 3. Wearing Earbuds
NOTE: Actual product design may differ from images shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
Make sure authentic LG Electronics components are used. Using a non-
authentic component may damage the product and thus void the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
Charging port
Charging terminals
UVnano LED
Mood light
(When you open the
charging case, the mood
light turns on and off.)
UVnano LED
Battery Status Indicator (up)
UVnano Indicator (down)
Speaker mesh
(Microphone)
Microphone
Microphone
Touchpad
Touchpad
Charging terminals
Charging terminals
Speaker mesh
(Microphone)
-(
-(
#MVFUPPUI 0/
~1m
Turn on the Bluetooth function on the mobile phone or the device to be
connected.
Open the cover of the charging case with the earbuds mounted on the case.
Press and hold the touchpad of the left or right earbud for 3 to 5 seconds
until the battery status indicator blinks in blue.
-(
-(
-(
-(50/&'1
-(
-(50/&'1
#MVFUPPUI
When the Fast Pair connection pop-up appears on the top area of the
mobile phone screen, tap it to connect. (It only supports Android™ 6.0
or higher, and requires conguring Bluetooth and location information
settings of the mobile device.)
If the pop-up does not appear, select [LG-TONE-FP8] from the
Bluetooth menu on the mobile phone and connect it (for users of iOS or
Android 5.0 or lower versions).
!
CAUTION: In the list of Bluetooth connected devices, LG-TONE-FP8_LE
is not the correct model name for connection. Check the model name in
use and connect with the model name without “LE”.
If the earbud model name is abnormally displayed on the Android device,
change the model name in the Bluetooth menu of Connected Device
Settings.
NOTE: To connect with another device, perform the above procedure again.
Automatic Reconnection
The earbuds are connected automatically when you open the cover of the
charging case. If you close the cover of the charging case with both earbuds
mounted in the charging case, the earbuds are disconnected.
Separate the earbuds from the charging case and adjust them so that
they t comfortably in your ears.
NOTE: You can use ear gels that t your ears to improve
Active Noise Canceling (ANC) performance and enjoy
rich music sound.
When you wear the earbuds, you will hear a wearing detection alarm.
4. Playing Music
5. Mobile Calling Functions 7. UVnano 8. Charging 9. Checking the Battery Status
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting
the Volume
: Touch the left(Decrease volume) or
right(Increase volume) earbud twice.
Play Next : Touch the left or right earbud three times.
NOTE: You can change the operation method of the function in the
touchpad settings of the LG TONE Free app.
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired after
mounting them on the charging case
and closing the cover, the UVnano
LED operates for 5 minutes.
*UVnano is a compound word
derived from the words UV and its
unit, nanometer.
NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano charging case eliminates up to 99.9% of harmful
bacteria inside the earbud hole.
In the case of a white product, discolouring may occur in the
contact area of the UVnano LED, but it does not affect the product
function.
!
CAUTION: Be aware that the temperature of the earbuds may rise
while the UVnano LED is on.
[Wired Charging]
When the charging cable is connected, the charging status is displayed in the
charging case.
NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power
to mobile phones, etc.
If earbuds are mounted in the charging case, the earbuds’ battery status is
displayed. Otherwise, the charging case’s battery status is displayed.
If the earbuds are mounted in the charging case while plugged in, the
UVnano process will commence for 5 minutes. Once this process is
complete, the charging case’s battery status will be displayed.
Battery
Status
Indicator
Remaining Battery
(charger not
connected)
Charging State
(charger
connected)
Red 20% or lower Charging
Yellow 20% - 80% -
Green 80% or higher Fully charged
NOTE: When the charging case lid is closed, charging case battery
status is displayed. If the charging case has no remaining charge, there
will be no display and it cannot function. We recommend you keep the
charging case charged at all times as the earbuds are not able to be
turned on and turned off independently.
Touch and hold the left or right earbud to switch between the ANC mode
and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
You can congure the Listen to the Ambient Sound mode and Conversation
mode using the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing
the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music,
or being on the phone.
*ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient
sound become loud suddenly.
When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
Function Status Description
Answering
Calls Ringing Touch the left or right earbud once.
Ending Calls Talking Touch the left or right earbud twice.
Making Calls Idle If you make a call using a mobile phone, the
call is automatically connected to the headset.
Receiving
Calls while on
the Phone
Talking
If you touch the left or right earbud once,
the current call will go on hold, and you will
be able to answer an incoming call.
If the previous call is on hold, you can nish
the current call on the mobile phone.
(It works differently depending on the
mobile phone settings.)
Rejecting
Calls Ringing Touch and hold the left or right earbud.
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
NOTE: The wireless charger is not provided. The wireless charging
function may not work in some wireless chargers. Wireless charging
feature charges at a slower rate due to less power being transmitted
to the charging case.
If you do wireless charging, the UVnano LED sterilizes the earbuds for
5 minutes before charging.
LG TONE Free™
Earbuds
UV Charging Case
USB Type C™
Charging Cable
Warranty Card
Extra Ear Gels
(small & large)
Owner’s Manual
1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
OWNER’S MANUAL
Bluetooth®LG Stereo Headset
TONE-FP8
TONE-FP8W
TONE-FP8E Copyright © 2021 LG Electronics Inc. All Rights Reserved
Google Play App Store
www.lg.com
NOTE: For the best performance and
to prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Rev 1.0 IN
[Charging Case]
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to the
ambient sound so that you can recognize the surrounding situation and any
potential risks.
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient sound.
So, you can use the function to listen to the music or watch a video without
interference.
[Earbuds]
*Make sure that the charging terminal is not soiled with foreign substance.
*The appearance and specications of the actual product may differ depending
on the model.
1. Overview
6. Listen to the Ambient Sound (LAS) / Active Noise Cancellation (ANC)
2. How to pair 3. Wearing Earbuds
NOTE: Actual product design may differ from images shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
Make sure authentic LG Electronics components are used. Using a non-
authentic component may damage the product and thus void the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
Charging port
Charging terminals
UVnano LED
Mood light
(When you open the
charging case, the mood
light turns on and off.)
UVnano LED
Battery Status Indicator (up)
UVnano Indicator (down)
Speaker mesh
(Microphone)
Microphone
Microphone
Touchpad
Touchpad
Charging terminals
Charging terminals
Speaker mesh
(Microphone)
-(
-(
#MVFUPPUI 0/
~1m
Turn on the Bluetooth function on the mobile phone or the device to be
connected.
Open the cover of the charging case with the earbuds mounted on the case.
Press and hold the touchpad of the left or right earbud for 3 to 5 seconds
until the battery status indicator blinks in blue.
-(
-(
-(
-(50/&'1
-(
-(50/&'1
#MVFUPPUI
When the Fast Pair connection pop-up appears on the top area of the
mobile phone screen, tap it to connect. (It only supports Android™ 6.0
or higher, and requires conguring Bluetooth and location information
settings of the mobile device.)
If the pop-up does not appear, select [LG-TONE-FP8] from the
Bluetooth menu on the mobile phone and connect it (for users of iOS or
Android 5.0 or lower versions).
!
CAUTION: In the list of Bluetooth connected devices, LG-TONE-FP8_LE
is not the correct model name for connection. Check the model name in
use and connect with the model name without “LE”.
If the earbud model name is abnormally displayed on the Android device,
change the model name in the Bluetooth menu of Connected Device
Settings.
NOTE: To connect with another device, perform the above procedure again.
Automatic Reconnection
The earbuds are connected automatically when you open the cover of the
charging case. If you close the cover of the charging case with both earbuds
mounted in the charging case, the earbuds are disconnected.
Separate the earbuds from the charging case and adjust them so that
they t comfortably in your ears.
NOTE: You can use ear gels that t your ears to improve
Active Noise Canceling (ANC) performance and enjoy
rich music sound.
When you wear the earbuds, you will hear a wearing detection alarm.
4. Playing Music
5. Mobile Calling Functions 7. UVnano 8. Charging 9. Checking the Battery Status
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting
the Volume
: Touch the left(Decrease volume) or
right(Increase volume) earbud twice.
Play Next : Touch the left or right earbud three times.
NOTE: You can change the operation method of the function in the
touchpad settings of the LG TONE Free app.
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired after
mounting them on the charging case
and closing the cover, the UVnano
LED operates for 5 minutes.
*UVnano is a compound word
derived from the words UV and its
unit, nanometer.
NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano charging case eliminates up to 99.9% of harmful
bacteria inside the earbud hole.
In the case of a white product, discolouring may occur in the
contact area of the UVnano LED, but it does not affect the product
function.
!
CAUTION: Be aware that the temperature of the earbuds may rise
while the UVnano LED is on.
[Wired Charging]
When the charging cable is connected, the charging status is displayed in the
charging case.
NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power
to mobile phones, etc.
If earbuds are mounted in the charging case, the earbuds’ battery status is
displayed. Otherwise, the charging case’s battery status is displayed.
If the earbuds are mounted in the charging case while plugged in, the
UVnano process will commence for 5 minutes. Once this process is
complete, the charging case’s battery status will be displayed.
Battery
Status
Indicator
Remaining Battery
(charger not
connected)
Charging State
(charger
connected)
Red 20% or lower Charging
Yellow 20% - 80% -
Green 80% or higher Fully charged
NOTE: When the charging case lid is closed, charging case battery
status is displayed. If the charging case has no remaining charge, there
will be no display and it cannot function. We recommend you keep the
charging case charged at all times as the earbuds are not able to be
turned on and turned off independently.
Touch and hold the left or right earbud to switch between the ANC mode
and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
You can congure the Listen to the Ambient Sound mode and Conversation
mode using the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing
the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music,
or being on the phone.
*ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient
sound become loud suddenly.
When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
Function Status Description
Answering
Calls Ringing Touch the left or right earbud once.
Ending Calls Talking Touch the left or right earbud twice.
Making Calls Idle If you make a call using a mobile phone, the
call is automatically connected to the headset.
Receiving
Calls while on
the Phone
Talking
If you touch the left or right earbud once,
the current call will go on hold, and you will
be able to answer an incoming call.
If the previous call is on hold, you can nish
the current call on the mobile phone.
(It works differently depending on the
mobile phone settings.)
Rejecting
Calls Ringing Touch and hold the left or right earbud.
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
NOTE: The wireless charger is not provided. The wireless charging
function may not work in some wireless chargers. Wireless charging
feature charges at a slower rate due to less power being transmitted
to the charging case.
If you do wireless charging, the UVnano LED sterilizes the earbuds for
5 minutes before charging.
LG TONE Free™
Earbuds
UV Charging Case
USB Type C™
Charging Cable
Warranty Card
Extra Ear Gels
(small & large)
Owner’s Manual
1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
OWNER’S MANUAL
Bluetooth®LG Stereo Headset
TONE-FP8
TONE-FP8W
TONE-FP8E Copyright © 2021 LG Electronics Inc. All Rights Reserved
Google Play App Store
www.lg.com
NOTE: For the best performance and
to prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Rev 1.0 IN
[Charging Case]
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to the
ambient sound so that you can recognize the surrounding situation and any
potential risks.
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient sound.
So, you can use the function to listen to the music or watch a video without
interference.
[Earbuds]
*Make sure that the charging terminal is not soiled with foreign substance.
*The appearance and specications of the actual product may differ depending
on the model.
1. Overview
6. Listen to the Ambient Sound (LAS) / Active Noise Cancellation (ANC)
2. How to pair 3. Wearing Earbuds
NOTE: Actual product design may differ from images shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
Make sure authentic LG Electronics components are used. Using a non-
authentic component may damage the product and thus void the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
Charging port
Charging terminals
UVnano LED
Mood light
(When you open the
charging case, the mood
light turns on and off.)
UVnano LED
Battery Status Indicator (up)
UVnano Indicator (down)
Speaker mesh
(Microphone)
Microphone
Microphone
Touchpad
Touchpad
Charging terminals
Charging terminals
Speaker mesh
(Microphone)
-(
-(
#MVFUPPUI 0/
~1m
Turn on the Bluetooth function on the mobile phone or the device to be
connected.
Open the cover of the charging case with the earbuds mounted on the case.
Press and hold the touchpad of the left or right earbud for 3 to 5 seconds
until the battery status indicator blinks in blue.
-(
-(
-(
-(50/&'1
-(
-(50/&'1
#MVFUPPUI
When the Fast Pair connection pop-up appears on the top area of the
mobile phone screen, tap it to connect. (It only supports Android™ 6.0
or higher, and requires conguring Bluetooth and location information
settings of the mobile device.)
If the pop-up does not appear, select [LG-TONE-FP8] from the
Bluetooth menu on the mobile phone and connect it (for users of iOS or
Android 5.0 or lower versions).
!
CAUTION: In the list of Bluetooth connected devices, LG-TONE-FP8_LE
is not the correct model name for connection. Check the model name in
use and connect with the model name without “LE”.
If the earbud model name is abnormally displayed on the Android device,
change the model name in the Bluetooth menu of Connected Device
Settings.
NOTE: To connect with another device, perform the above procedure again.
Automatic Reconnection
The earbuds are connected automatically when you open the cover of the
charging case. If you close the cover of the charging case with both earbuds
mounted in the charging case, the earbuds are disconnected.
Separate the earbuds from the charging case and adjust them so that
they t comfortably in your ears.
NOTE: You can use ear gels that t your ears to improve
Active Noise Canceling (ANC) performance and enjoy
rich music sound.
When you wear the earbuds, you will hear a wearing detection alarm.
4. Playing Music
5. Mobile Calling Functions 7. UVnano 8. Charging 9. Checking the Battery Status
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting
the Volume
: Touch the left(Decrease volume) or
right(Increase volume) earbud twice.
Play Next : Touch the left or right earbud three times.
NOTE: You can change the operation method of the function in the
touchpad settings of the LG TONE Free app.
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired after
mounting them on the charging case
and closing the cover, the UVnano
LED operates for 5 minutes.
*UVnano is a compound word
derived from the words UV and its
unit, nanometer.
NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano charging case eliminates up to 99.9% of harmful
bacteria inside the earbud hole.
In the case of a white product, discolouring may occur in the
contact area of the UVnano LED, but it does not affect the product
function.
!
CAUTION: Be aware that the temperature of the earbuds may rise
while the UVnano LED is on.
[Wired Charging]
When the charging cable is connected, the charging status is displayed in the
charging case.
NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power
to mobile phones, etc.
If earbuds are mounted in the charging case, the earbuds’ battery status is
displayed. Otherwise, the charging case’s battery status is displayed.
If the earbuds are mounted in the charging case while plugged in, the
UVnano process will commence for 5 minutes. Once this process is
complete, the charging case’s battery status will be displayed.
Battery
Status
Indicator
Remaining Battery
(charger not
connected)
Charging State
(charger
connected)
Red 20% or lower Charging
Yellow 20% - 80% -
Green 80% or higher Fully charged
NOTE: When the charging case lid is closed, charging case battery
status is displayed. If the charging case has no remaining charge, there
will be no display and it cannot function. We recommend you keep the
charging case charged at all times as the earbuds are not able to be
turned on and turned off independently.
Touch and hold the left or right earbud to switch between the ANC mode
and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
You can congure the Listen to the Ambient Sound mode and Conversation
mode using the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing
the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music,
or being on the phone.
*ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient
sound become loud suddenly.
When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
Function Status Description
Answering
Calls Ringing Touch the left or right earbud once.
Ending Calls Talking Touch the left or right earbud twice.
Making Calls Idle If you make a call using a mobile phone, the
call is automatically connected to the headset.
Receiving
Calls while on
the Phone
Talking
If you touch the left or right earbud once,
the current call will go on hold, and you will
be able to answer an incoming call.
If the previous call is on hold, you can nish
the current call on the mobile phone.
(It works differently depending on the
mobile phone settings.)
Rejecting
Calls Ringing Touch and hold the left or right earbud.
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
NOTE: The wireless charger is not provided. The wireless charging
function may not work in some wireless chargers. Wireless charging
feature charges at a slower rate due to less power being transmitted
to the charging case.
If you do wireless charging, the UVnano LED sterilizes the earbuds for
5 minutes before charging.
LG TONE Free™
Earbuds
UV Charging Case
USB Type C™
Charging Cable
Warranty Card
Extra Ear Gels
(small & large)
Owner’s Manual
1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
OWNER’S MANUAL
Bluetooth®LG Stereo Headset
TONE-FP8
TONE-FP8W
TONE-FP8E Copyright © 2021 LG Electronics Inc. All Rights Reserved
Google Play App Store
www.lg.com
NOTE: For the best performance and
to prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Rev 1.0 IN
[Charging Case]
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to the
ambient sound so that you can recognize the surrounding situation and any
potential risks.
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient sound.
So, you can use the function to listen to the music or watch a video without
interference.
[Earbuds]
*Make sure that the charging terminal is not soiled with foreign substance.
*The appearance and specications of the actual product may differ depending
on the model.
1. Overview
6. Listen to the Ambient Sound (LAS) / Active Noise Cancellation (ANC)
2. How to pair 3. Wearing Earbuds
NOTE: Actual product design may differ from images shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
Make sure authentic LG Electronics components are used. Using a non-
authentic component may damage the product and thus void the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
Charging port
Charging terminals
UVnano LED
Mood light
(When you open the
charging case, the mood
light turns on and off.)
UVnano LED
Battery Status Indicator (up)
UVnano Indicator (down)
Speaker mesh
(Microphone)
Microphone
Microphone
Touchpad
Touchpad
Charging terminals
Charging terminals
Speaker mesh
(Microphone)
-(
-(
#MVFUPPUI 0/
~1m
Turn on the Bluetooth function on the mobile phone or the device to be
connected.
Open the cover of the charging case with the earbuds mounted on the case.
Press and hold the touchpad of the left or right earbud for 3 to 5 seconds
until the battery status indicator blinks in blue.
-(
-(
-(
-(50/&'1
-(
-(50/&'1
#MVFUPPUI
When the Fast Pair connection pop-up appears on the top area of the
mobile phone screen, tap it to connect. (It only supports Android™ 6.0
or higher, and requires conguring Bluetooth and location information
settings of the mobile device.)
If the pop-up does not appear, select [LG-TONE-FP8] from the
Bluetooth menu on the mobile phone and connect it (for users of iOS or
Android 5.0 or lower versions).
!
CAUTION: In the list of Bluetooth connected devices, LG-TONE-FP8_LE
is not the correct model name for connection. Check the model name in
use and connect with the model name without “LE”.
If the earbud model name is abnormally displayed on the Android device,
change the model name in the Bluetooth menu of Connected Device
Settings.
NOTE: To connect with another device, perform the above procedure again.
Automatic Reconnection
The earbuds are connected automatically when you open the cover of the
charging case. If you close the cover of the charging case with both earbuds
mounted in the charging case, the earbuds are disconnected.
Separate the earbuds from the charging case and adjust them so that
they t comfortably in your ears.
NOTE: You can use ear gels that t your ears to improve
Active Noise Canceling (ANC) performance and enjoy
rich music sound.
When you wear the earbuds, you will hear a wearing detection alarm.
4. Playing Music
5. Mobile Calling Functions 7. UVnano 8. Charging 9. Checking the Battery Status
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting
the Volume
: Touch the left(Decrease volume) or
right(Increase volume) earbud twice.
Play Next : Touch the left or right earbud three times.
NOTE: You can change the operation method of the function in the
touchpad settings of the LG TONE Free app.
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired after
mounting them on the charging case
and closing the cover, the UVnano
LED operates for 5 minutes.
*UVnano is a compound word
derived from the words UV and its
unit, nanometer.
NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano charging case eliminates up to 99.9% of harmful
bacteria inside the earbud hole.
In the case of a white product, discolouring may occur in the
contact area of the UVnano LED, but it does not affect the product
function.
!
CAUTION: Be aware that the temperature of the earbuds may rise
while the UVnano LED is on.
[Wired Charging]
When the charging cable is connected, the charging status is displayed in the
charging case.
NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power
to mobile phones, etc.
If earbuds are mounted in the charging case, the earbuds’ battery status is
displayed. Otherwise, the charging case’s battery status is displayed.
If the earbuds are mounted in the charging case while plugged in, the
UVnano process will commence for 5 minutes. Once this process is
complete, the charging case’s battery status will be displayed.
Battery
Status
Indicator
Remaining Battery
(charger not
connected)
Charging State
(charger
connected)
Red 20% or lower Charging
Yellow 20% - 80% -
Green 80% or higher Fully charged
NOTE: When the charging case lid is closed, charging case battery
status is displayed. If the charging case has no remaining charge, there
will be no display and it cannot function. We recommend you keep the
charging case charged at all times as the earbuds are not able to be
turned on and turned off independently.
Touch and hold the left or right earbud to switch between the ANC mode
and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
You can congure the Listen to the Ambient Sound mode and Conversation
mode using the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing
the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music,
or being on the phone.
*ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient
sound become loud suddenly.
When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
Function Status Description
Answering
Calls Ringing Touch the left or right earbud once.
Ending Calls Talking Touch the left or right earbud twice.
Making Calls Idle If you make a call using a mobile phone, the
call is automatically connected to the headset.
Receiving
Calls while on
the Phone
Talking
If you touch the left or right earbud once,
the current call will go on hold, and you will
be able to answer an incoming call.
If the previous call is on hold, you can nish
the current call on the mobile phone.
(It works differently depending on the
mobile phone settings.)
Rejecting
Calls Ringing Touch and hold the left or right earbud.
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
NOTE: The wireless charger is not provided. The wireless charging
function may not work in some wireless chargers. Wireless charging
feature charges at a slower rate due to less power being transmitted
to the charging case.
If you do wireless charging, the UVnano LED sterilizes the earbuds for
5 minutes before charging.
LG TONE Free™
Earbuds
UV Charging Case
USB Type C™
Charging Cable
Warranty Card
Extra Ear Gels
(small & large)
Owner’s Manual
1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
OWNER’S MANUAL
Bluetooth®LG Stereo Headset
TONE-FP8
TONE-FP8W
TONE-FP8E Copyright © 2021 LG Electronics Inc. All Rights Reserved
Google Play App Store
www.lg.com
NOTE: For the best performance and
to prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Rev 1.0 IN
[Charging Case]
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to the
ambient sound so that you can recognize the surrounding situation and any
potential risks.
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient sound.
So, you can use the function to listen to the music or watch a video without
interference.
[Earbuds]
*Make sure that the charging terminal is not soiled with foreign substance.
*The appearance and specications of the actual product may differ depending
on the model.
1. Overview
6. Listen to the Ambient Sound (LAS) / Active Noise Cancellation (ANC)
2. How to pair 3. Wearing Earbuds
NOTE: Actual product design may differ from images shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
Make sure authentic LG Electronics components are used. Using a non-
authentic component may damage the product and thus void the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
Charging port
Charging terminals
UVnano LED
Mood light
(When you open the
charging case, the mood
light turns on and off.)
UVnano LED
Battery Status Indicator (up)
UVnano Indicator (down)
Speaker mesh
(Microphone)
Microphone
Microphone
Touchpad
Touchpad
Charging terminals
Charging terminals
Speaker mesh
(Microphone)
-(
-(
#MVFUPPUI 0/
~1m
Turn on the Bluetooth function on the mobile phone or the device to be
connected.
Open the cover of the charging case with the earbuds mounted on the case.
Press and hold the touchpad of the left or right earbud for 3 to 5 seconds
until the battery status indicator blinks in blue.
-(
-(
-(
-(50/&'1
-(
-(50/&'1
#MVFUPPUI
When the Fast Pair connection pop-up appears on the top area of the
mobile phone screen, tap it to connect. (It only supports Android™ 6.0
or higher, and requires conguring Bluetooth and location information
settings of the mobile device.)
If the pop-up does not appear, select [LG-TONE-FP8] from the
Bluetooth menu on the mobile phone and connect it (for users of iOS or
Android 5.0 or lower versions).
!
CAUTION: In the list of Bluetooth connected devices, LG-TONE-FP8_LE
is not the correct model name for connection. Check the model name in
use and connect with the model name without “LE”.
If the earbud model name is abnormally displayed on the Android device,
change the model name in the Bluetooth menu of Connected Device
Settings.
NOTE: To connect with another device, perform the above procedure again.
Automatic Reconnection
The earbuds are connected automatically when you open the cover of the
charging case. If you close the cover of the charging case with both earbuds
mounted in the charging case, the earbuds are disconnected.
Separate the earbuds from the charging case and adjust them so that
they t comfortably in your ears.
NOTE: You can use ear gels that t your ears to improve
Active Noise Canceling (ANC) performance and enjoy
rich music sound.
When you wear the earbuds, you will hear a wearing detection alarm.
4. Playing Music
5. Mobile Calling Functions 7. UVnano 8. Charging 9. Checking the Battery Status
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting
the Volume
: Touch the left(Decrease volume) or
right(Increase volume) earbud twice.
Play Next : Touch the left or right earbud three times.
NOTE: You can change the operation method of the function in the
touchpad settings of the LG TONE Free app.
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired after
mounting them on the charging case
and closing the cover, the UVnano
LED operates for 5 minutes.
*UVnano is a compound word
derived from the words UV and its
unit, nanometer.
NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano charging case eliminates up to 99.9% of harmful
bacteria inside the earbud hole.
In the case of a white product, discolouring may occur in the
contact area of the UVnano LED, but it does not affect the product
function.
!
CAUTION: Be aware that the temperature of the earbuds may rise
while the UVnano LED is on.
[Wired Charging]
When the charging cable is connected, the charging status is displayed in the
charging case.
NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power
to mobile phones, etc.
If earbuds are mounted in the charging case, the earbuds’ battery status is
displayed. Otherwise, the charging case’s battery status is displayed.
If the earbuds are mounted in the charging case while plugged in, the
UVnano process will commence for 5 minutes. Once this process is
complete, the charging case’s battery status will be displayed.
Battery
Status
Indicator
Remaining Battery
(charger not
connected)
Charging State
(charger
connected)
Red 20% or lower Charging
Yellow 20% - 80% -
Green 80% or higher Fully charged
NOTE: When the charging case lid is closed, charging case battery
status is displayed. If the charging case has no remaining charge, there
will be no display and it cannot function. We recommend you keep the
charging case charged at all times as the earbuds are not able to be
turned on and turned off independently.
Touch and hold the left or right earbud to switch between the ANC mode
and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
You can congure the Listen to the Ambient Sound mode and Conversation
mode using the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing
the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music,
or being on the phone.
*ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient
sound become loud suddenly.
When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
Function Status Description
Answering
Calls Ringing Touch the left or right earbud once.
Ending Calls Talking Touch the left or right earbud twice.
Making Calls Idle If you make a call using a mobile phone, the
call is automatically connected to the headset.
Receiving
Calls while on
the Phone
Talking
If you touch the left or right earbud once,
the current call will go on hold, and you will
be able to answer an incoming call.
If the previous call is on hold, you can nish
the current call on the mobile phone.
(It works differently depending on the
mobile phone settings.)
Rejecting
Calls Ringing Touch and hold the left or right earbud.
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
NOTE: The wireless charger is not provided. The wireless charging
function may not work in some wireless chargers. Wireless charging
feature charges at a slower rate due to less power being transmitted
to the charging case.
If you do wireless charging, the UVnano LED sterilizes the earbuds for
5 minutes before charging.
LG TONE Free™
Earbuds
UV Charging Case
USB Type C™
Charging Cable
Warranty Card
Extra Ear Gels
(small & large)
Owner’s Manual
1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
OWNER’S MANUAL
Bluetooth®LG Stereo Headset
TONE-FP8
TONE-FP8W
TONE-FP8E Copyright © 2021 LG Electronics Inc. All Rights Reserved
Google Play App Store
www.lg.com
NOTE: For the best performance and
to prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Rev 1.0 IN
[Charging Case]
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to the
ambient sound so that you can recognize the surrounding situation and any
potential risks.
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient sound.
So, you can use the function to listen to the music or watch a video without
interference.
[Earbuds]
*Make sure that the charging terminal is not soiled with foreign substance.
*The appearance and specications of the actual product may differ depending
on the model.
1. Overview
6. Listen to the Ambient Sound (LAS) / Active Noise Cancellation (ANC)
2. How to pair 3. Wearing Earbuds
NOTE: Actual product design may differ from images shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
Make sure authentic LG Electronics components are used. Using a non-
authentic component may damage the product and thus void the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
Charging port
Charging terminals
UVnano LED
Mood light
(When you open the
charging case, the mood
light turns on and off.)
UVnano LED
Battery Status Indicator (up)
UVnano Indicator (down)
Speaker mesh
(Microphone)
Microphone
Microphone
Touchpad
Touchpad
Charging terminals
Charging terminals
Speaker mesh
(Microphone)
-(
-(
#MVFUPPUI 0/
~1m
Turn on the Bluetooth function on the mobile phone or the device to be
connected.
Open the cover of the charging case with the earbuds mounted on the case.
Press and hold the touchpad of the left or right earbud for 3 to 5 seconds
until the battery status indicator blinks in blue.
-(
-(
-(
-(50/&'1
-(
-(50/&'1
#MVFUPPUI
When the Fast Pair connection pop-up appears on the top area of the
mobile phone screen, tap it to connect. (It only supports Android™ 6.0
or higher, and requires conguring Bluetooth and location information
settings of the mobile device.)
If the pop-up does not appear, select [LG-TONE-FP8] from the
Bluetooth menu on the mobile phone and connect it (for users of iOS or
Android 5.0 or lower versions).
!
CAUTION: In the list of Bluetooth connected devices, LG-TONE-FP8_LE
is not the correct model name for connection. Check the model name in
use and connect with the model name without “LE”.
If the earbud model name is abnormally displayed on the Android device,
change the model name in the Bluetooth menu of Connected Device
Settings.
NOTE: To connect with another device, perform the above procedure again.
Automatic Reconnection
The earbuds are connected automatically when you open the cover of the
charging case. If you close the cover of the charging case with both earbuds
mounted in the charging case, the earbuds are disconnected.
Separate the earbuds from the charging case and adjust them so that
they t comfortably in your ears.
NOTE: You can use ear gels that t your ears to improve
Active Noise Canceling (ANC) performance and enjoy
rich music sound.
When you wear the earbuds, you will hear a wearing detection alarm.
4. Playing Music
5. Mobile Calling Functions 7. UVnano 8. Charging 9. Checking the Battery Status
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting
the Volume
: Touch the left(Decrease volume) or
right(Increase volume) earbud twice.
Play Next : Touch the left or right earbud three times.
NOTE: You can change the operation method of the function in the
touchpad settings of the LG TONE Free app.
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired after
mounting them on the charging case
and closing the cover, the UVnano
LED operates for 5 minutes.
*UVnano is a compound word
derived from the words UV and its
unit, nanometer.
NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano charging case eliminates up to 99.9% of harmful
bacteria inside the earbud hole.
In the case of a white product, discolouring may occur in the
contact area of the UVnano LED, but it does not affect the product
function.
!
CAUTION: Be aware that the temperature of the earbuds may rise
while the UVnano LED is on.
[Wired Charging]
When the charging cable is connected, the charging status is displayed in the
charging case.
NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power
to mobile phones, etc.
If earbuds are mounted in the charging case, the earbuds’ battery status is
displayed. Otherwise, the charging case’s battery status is displayed.
If the earbuds are mounted in the charging case while plugged in, the
UVnano process will commence for 5 minutes. Once this process is
complete, the charging case’s battery status will be displayed.
Battery
Status
Indicator
Remaining Battery
(charger not
connected)
Charging State
(charger
connected)
Red 20% or lower Charging
Yellow 20% - 80% -
Green 80% or higher Fully charged
NOTE: When the charging case lid is closed, charging case battery
status is displayed. If the charging case has no remaining charge, there
will be no display and it cannot function. We recommend you keep the
charging case charged at all times as the earbuds are not able to be
turned on and turned off independently.
Touch and hold the left or right earbud to switch between the ANC mode
and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
You can congure the Listen to the Ambient Sound mode and Conversation
mode using the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing
the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music,
or being on the phone.
*ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient
sound become loud suddenly.
When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
Function Status Description
Answering
Calls Ringing Touch the left or right earbud once.
Ending Calls Talking Touch the left or right earbud twice.
Making Calls Idle If you make a call using a mobile phone, the
call is automatically connected to the headset.
Receiving
Calls while on
the Phone
Talking
If you touch the left or right earbud once,
the current call will go on hold, and you will
be able to answer an incoming call.
If the previous call is on hold, you can nish
the current call on the mobile phone.
(It works differently depending on the
mobile phone settings.)
Rejecting
Calls Ringing Touch and hold the left or right earbud.
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
NOTE: The wireless charger is not provided. The wireless charging
function may not work in some wireless chargers. Wireless charging
feature charges at a slower rate due to less power being transmitted
to the charging case.
If you do wireless charging, the UVnano LED sterilizes the earbuds for
5 minutes before charging.
LG TONE Free™
Earbuds
UV Charging Case
USB Type C™
Charging Cable
Warranty Card
Extra Ear Gels
(small & large)
Owner’s Manual
1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
OWNER’S MANUAL
Bluetooth®LG Stereo Headset
TONE-FP8
TONE-FP8W
TONE-FP8E Copyright © 2021 LG Electronics Inc. All Rights Reserved
Google Play App Store
www.lg.com
NOTE: For the best performance and
to prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Rev 1.0 IN
[Charging Case]
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to the
ambient sound so that you can recognize the surrounding situation and any
potential risks.
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient sound.
So, you can use the function to listen to the music or watch a video without
interference.
[Earbuds]
*Make sure that the charging terminal is not soiled with foreign substance.
*The appearance and specications of the actual product may differ depending
on the model.
1. Overview
6. Listen to the Ambient Sound (LAS) / Active Noise Cancellation (ANC)
2. How to pair 3. Wearing Earbuds
NOTE: Actual product design may differ from images shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
Make sure authentic LG Electronics components are used. Using a non-
authentic component may damage the product and thus void the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
Charging port
Charging terminals
UVnano LED
Mood light
(When you open the
charging case, the mood
light turns on and off.)
UVnano LED
Battery Status Indicator (up)
UVnano Indicator (down)
Speaker mesh
(Microphone)
Microphone
Microphone
Touchpad
Touchpad
Charging terminals
Charging terminals
Speaker mesh
(Microphone)
-(
-(
#MVFUPPUI 0/
~1m
Turn on the Bluetooth function on the mobile phone or the device to be
connected.
Open the cover of the charging case with the earbuds mounted on the case.
Press and hold the touchpad of the left or right earbud for 3 to 5 seconds
until the battery status indicator blinks in blue.
-(
-(
-(
-(50/&'1
-(
-(50/&'1
#MVFUPPUI
When the Fast Pair connection pop-up appears on the top area of the
mobile phone screen, tap it to connect. (It only supports Android™ 6.0
or higher, and requires conguring Bluetooth and location information
settings of the mobile device.)
If the pop-up does not appear, select [LG-TONE-FP8] from the
Bluetooth menu on the mobile phone and connect it (for users of iOS or
Android 5.0 or lower versions).
!
CAUTION: In the list of Bluetooth connected devices, LG-TONE-FP8_LE
is not the correct model name for connection. Check the model name in
use and connect with the model name without “LE”.
If the earbud model name is abnormally displayed on the Android device,
change the model name in the Bluetooth menu of Connected Device
Settings.
NOTE: To connect with another device, perform the above procedure again.
Automatic Reconnection
The earbuds are connected automatically when you open the cover of the
charging case. If you close the cover of the charging case with both earbuds
mounted in the charging case, the earbuds are disconnected.
Separate the earbuds from the charging case and adjust them so that
they t comfortably in your ears.
NOTE: You can use ear gels that t your ears to improve
Active Noise Canceling (ANC) performance and enjoy
rich music sound.
When you wear the earbuds, you will hear a wearing detection alarm.
4. Playing Music
5. Mobile Calling Functions 7. UVnano 8. Charging 9. Checking the Battery Status
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting
the Volume
: Touch the left(Decrease volume) or
right(Increase volume) earbud twice.
Play Next : Touch the left or right earbud three times.
NOTE: You can change the operation method of the function in the
touchpad settings of the LG TONE Free app.
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired after
mounting them on the charging case
and closing the cover, the UVnano
LED operates for 5 minutes.
*UVnano is a compound word
derived from the words UV and its
unit, nanometer.
NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano charging case eliminates up to 99.9% of harmful
bacteria inside the earbud hole.
In the case of a white product, discolouring may occur in the
contact area of the UVnano LED, but it does not affect the product
function.
!
CAUTION: Be aware that the temperature of the earbuds may rise
while the UVnano LED is on.
[Wired Charging]
When the charging cable is connected, the charging status is displayed in the
charging case.
NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power
to mobile phones, etc.
If earbuds are mounted in the charging case, the earbuds’ battery status is
displayed. Otherwise, the charging case’s battery status is displayed.
If the earbuds are mounted in the charging case while plugged in, the
UVnano process will commence for 5 minutes. Once this process is
complete, the charging case’s battery status will be displayed.
Battery
Status
Indicator
Remaining Battery
(charger not
connected)
Charging State
(charger
connected)
Red 20% or lower Charging
Yellow 20% - 80% -
Green 80% or higher Fully charged
NOTE: When the charging case lid is closed, charging case battery
status is displayed. If the charging case has no remaining charge, there
will be no display and it cannot function. We recommend you keep the
charging case charged at all times as the earbuds are not able to be
turned on and turned off independently.
Touch and hold the left or right earbud to switch between the ANC mode
and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
You can congure the Listen to the Ambient Sound mode and Conversation
mode using the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing
the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music,
or being on the phone.
*ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient
sound become loud suddenly.
When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
Function Status Description
Answering
Calls Ringing Touch the left or right earbud once.
Ending Calls Talking Touch the left or right earbud twice.
Making Calls Idle If you make a call using a mobile phone, the
call is automatically connected to the headset.
Receiving
Calls while on
the Phone
Talking
If you touch the left or right earbud once,
the current call will go on hold, and you will
be able to answer an incoming call.
If the previous call is on hold, you can nish
the current call on the mobile phone.
(It works differently depending on the
mobile phone settings.)
Rejecting
Calls Ringing Touch and hold the left or right earbud.
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
NOTE: The wireless charger is not provided. The wireless charging
function may not work in some wireless chargers. Wireless charging
feature charges at a slower rate due to less power being transmitted
to the charging case.
If you do wireless charging, the UVnano LED sterilizes the earbuds for
5 minutes before charging.
LG TONE Free™
Earbuds
UV Charging Case
USB Type C™
Charging Cable
Warranty Card
Extra Ear Gels
(small & large)
Owner’s Manual
1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
OWNER’S MANUAL
Bluetooth®LG Stereo Headset
TONE-FP8
TONE-FP8W
TONE-FP8E Copyright © 2021 LG Electronics Inc. All Rights Reserved
Google Play App Store
www.lg.com
NOTE: For the best performance and
to prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Rev 1.0 IN
[Charging Case]
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to the
ambient sound so that you can recognize the surrounding situation and any
potential risks.
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient sound.
So, you can use the function to listen to the music or watch a video without
interference.
[Earbuds]
*Make sure that the charging terminal is not soiled with foreign substance.
*The appearance and specications of the actual product may differ depending
on the model.
1. Overview
6. Listen to the Ambient Sound (LAS) / Active Noise Cancellation (ANC)
2. How to pair 3. Wearing Earbuds
NOTE: Actual product design may differ from images shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
Make sure authentic LG Electronics components are used. Using a non-
authentic component may damage the product and thus void the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
Charging port
Charging terminals
UVnano LED
Mood light
(When you open the
charging case, the mood
light turns on and off.)
UVnano LED
Battery Status Indicator (up)
UVnano Indicator (down)
Speaker mesh
(Microphone)
Microphone
Microphone
Touchpad
Touchpad
Charging terminals
Charging terminals
Speaker mesh
(Microphone)
-(
-(
#MVFUPPUI 0/
~1m
Turn on the Bluetooth function on the mobile phone or the device to be
connected.
Open the cover of the charging case with the earbuds mounted on the case.
Press and hold the touchpad of the left or right earbud for 3 to 5 seconds
until the battery status indicator blinks in blue.
-(
-(
-(
-(50/&'1
-(
-(50/&'1
#MVFUPPUI
When the Fast Pair connection pop-up appears on the top area of the
mobile phone screen, tap it to connect. (It only supports Android™ 6.0
or higher, and requires conguring Bluetooth and location information
settings of the mobile device.)
If the pop-up does not appear, select [LG-TONE-FP8] from the
Bluetooth menu on the mobile phone and connect it (for users of iOS or
Android 5.0 or lower versions).
!
CAUTION: In the list of Bluetooth connected devices, LG-TONE-FP8_LE
is not the correct model name for connection. Check the model name in
use and connect with the model name without “LE”.
If the earbud model name is abnormally displayed on the Android device,
change the model name in the Bluetooth menu of Connected Device
Settings.
NOTE: To connect with another device, perform the above procedure again.
Automatic Reconnection
The earbuds are connected automatically when you open the cover of the
charging case. If you close the cover of the charging case with both earbuds
mounted in the charging case, the earbuds are disconnected.
Separate the earbuds from the charging case and adjust them so that
they t comfortably in your ears.
NOTE: You can use ear gels that t your ears to improve
Active Noise Canceling (ANC) performance and enjoy
rich music sound.
When you wear the earbuds, you will hear a wearing detection alarm.
4. Playing Music
5. Mobile Calling Functions 7. UVnano 8. Charging 9. Checking the Battery Status
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting
the Volume
: Touch the left(Decrease volume) or
right(Increase volume) earbud twice.
Play Next : Touch the left or right earbud three times.
NOTE: You can change the operation method of the function in the
touchpad settings of the LG TONE Free app.
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired after
mounting them on the charging case
and closing the cover, the UVnano
LED operates for 5 minutes.
*UVnano is a compound word
derived from the words UV and its
unit, nanometer.
NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano charging case eliminates up to 99.9% of harmful
bacteria inside the earbud hole.
In the case of a white product, discolouring may occur in the
contact area of the UVnano LED, but it does not affect the product
function.
!
CAUTION: Be aware that the temperature of the earbuds may rise
while the UVnano LED is on.
[Wired Charging]
When the charging cable is connected, the charging status is displayed in the
charging case.
NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power
to mobile phones, etc.
If earbuds are mounted in the charging case, the earbuds’ battery status is
displayed. Otherwise, the charging case’s battery status is displayed.
If the earbuds are mounted in the charging case while plugged in, the
UVnano process will commence for 5 minutes. Once this process is
complete, the charging case’s battery status will be displayed.
Battery
Status
Indicator
Remaining Battery
(charger not
connected)
Charging State
(charger
connected)
Red 20% or lower Charging
Yellow 20% - 80% -
Green 80% or higher Fully charged
NOTE: When the charging case lid is closed, charging case battery
status is displayed. If the charging case has no remaining charge, there
will be no display and it cannot function. We recommend you keep the
charging case charged at all times as the earbuds are not able to be
turned on and turned off independently.
Touch and hold the left or right earbud to switch between the ANC mode
and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
You can congure the Listen to the Ambient Sound mode and Conversation
mode using the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing
the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music,
or being on the phone.
*ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient
sound become loud suddenly.
When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
Function Status Description
Answering
Calls Ringing Touch the left or right earbud once.
Ending Calls Talking Touch the left or right earbud twice.
Making Calls Idle If you make a call using a mobile phone, the
call is automatically connected to the headset.
Receiving
Calls while on
the Phone
Talking
If you touch the left or right earbud once,
the current call will go on hold, and you will
be able to answer an incoming call.
If the previous call is on hold, you can nish
the current call on the mobile phone.
(It works differently depending on the
mobile phone settings.)
Rejecting
Calls Ringing Touch and hold the left or right earbud.
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
NOTE: The wireless charger is not provided. The wireless charging
function may not work in some wireless chargers. Wireless charging
feature charges at a slower rate due to less power being transmitted
to the charging case.
If you do wireless charging, the UVnano LED sterilizes the earbuds for
5 minutes before charging.
LG TONE Free™
Earbuds
UV Charging Case
USB Type C™
Charging Cable
Warranty Card
Extra Ear Gels
(small & large)
Owner’s Manual
1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
OWNER’S MANUAL
Bluetooth®LG Stereo Headset
TONE-FP8
TONE-FP8W
TONE-FP8E Copyright © 2021 LG Electronics Inc. All Rights Reserved
Google Play App Store
www.lg.com
NOTE: For the best performance and
to prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Rev 1.0 IN
[Charging Case]
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to the
ambient sound so that you can recognize the surrounding situation and any
potential risks.
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient sound.
So, you can use the function to listen to the music or watch a video without
interference.
[Earbuds]
*Make sure that the charging terminal is not soiled with foreign substance.
*The appearance and specications of the actual product may differ depending
on the model.
1. Overview
6. Listen to the Ambient Sound (LAS) / Active Noise Cancellation (ANC)
2. How to pair 3. Wearing Earbuds
NOTE: Actual product design may differ from images shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
Make sure authentic LG Electronics components are used. Using a non-
authentic component may damage the product and thus void the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
Charging port
Charging terminals
UVnano LED
Mood light
(When you open the
charging case, the mood
light turns on and off.)
UVnano LED
Battery Status Indicator (up)
UVnano Indicator (down)
Speaker mesh
(Microphone)
Microphone
Microphone
Touchpad
Touchpad
Charging terminals
Charging terminals
Speaker mesh
(Microphone)
-(
-(
#MVFUPPUI 0/
~1m
Turn on the Bluetooth function on the mobile phone or the device to be
connected.
Open the cover of the charging case with the earbuds mounted on the case.
Press and hold the touchpad of the left or right earbud for 3 to 5 seconds
until the battery status indicator blinks in blue.
-(
-(
-(
-(50/&'1
-(
-(50/&'1
#MVFUPPUI
When the Fast Pair connection pop-up appears on the top area of the
mobile phone screen, tap it to connect. (It only supports Android™ 6.0
or higher, and requires conguring Bluetooth and location information
settings of the mobile device.)
If the pop-up does not appear, select [LG-TONE-FP8] from the
Bluetooth menu on the mobile phone and connect it (for users of iOS or
Android 5.0 or lower versions).
!
CAUTION: In the list of Bluetooth connected devices, LG-TONE-FP8_LE
is not the correct model name for connection. Check the model name in
use and connect with the model name without “LE”.
If the earbud model name is abnormally displayed on the Android device,
change the model name in the Bluetooth menu of Connected Device
Settings.
NOTE: To connect with another device, perform the above procedure again.
Automatic Reconnection
The earbuds are connected automatically when you open the cover of the
charging case. If you close the cover of the charging case with both earbuds
mounted in the charging case, the earbuds are disconnected.
Separate the earbuds from the charging case and adjust them so that
they t comfortably in your ears.
NOTE: You can use ear gels that t your ears to improve
Active Noise Canceling (ANC) performance and enjoy
rich music sound.
When you wear the earbuds, you will hear a wearing detection alarm.
4. Playing Music
5. Mobile Calling Functions 7. UVnano 8. Charging 9. Checking the Battery Status
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting
the Volume
: Touch the left(Decrease volume) or
right(Increase volume) earbud twice.
Play Next : Touch the left or right earbud three times.
NOTE: You can change the operation method of the function in the
touchpad settings of the LG TONE Free app.
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired after
mounting them on the charging case
and closing the cover, the UVnano
LED operates for 5 minutes.
*UVnano is a compound word
derived from the words UV and its
unit, nanometer.
NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano charging case eliminates up to 99.9% of harmful
bacteria inside the earbud hole.
In the case of a white product, discolouring may occur in the
contact area of the UVnano LED, but it does not affect the product
function.
!
CAUTION: Be aware that the temperature of the earbuds may rise
while the UVnano LED is on.
[Wired Charging]
When the charging cable is connected, the charging status is displayed in the
charging case.
NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power
to mobile phones, etc.
If earbuds are mounted in the charging case, the earbuds’ battery status is
displayed. Otherwise, the charging case’s battery status is displayed.
If the earbuds are mounted in the charging case while plugged in, the
UVnano process will commence for 5 minutes. Once this process is
complete, the charging case’s battery status will be displayed.
Battery
Status
Indicator
Remaining Battery
(charger not
connected)
Charging State
(charger
connected)
Red 20% or lower Charging
Yellow 20% - 80% -
Green 80% or higher Fully charged
NOTE: When the charging case lid is closed, charging case battery
status is displayed. If the charging case has no remaining charge, there
will be no display and it cannot function. We recommend you keep the
charging case charged at all times as the earbuds are not able to be
turned on and turned off independently.
Touch and hold the left or right earbud to switch between the ANC mode
and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
You can congure the Listen to the Ambient Sound mode and Conversation
mode using the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing
the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music,
or being on the phone.
*ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient
sound become loud suddenly.
When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
Function Status Description
Answering
Calls Ringing Touch the left or right earbud once.
Ending Calls Talking Touch the left or right earbud twice.
Making Calls Idle If you make a call using a mobile phone, the
call is automatically connected to the headset.
Receiving
Calls while on
the Phone
Talking
If you touch the left or right earbud once,
the current call will go on hold, and you will
be able to answer an incoming call.
If the previous call is on hold, you can nish
the current call on the mobile phone.
(It works differently depending on the
mobile phone settings.)
Rejecting
Calls Ringing Touch and hold the left or right earbud.
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
NOTE: The wireless charger is not provided. The wireless charging
function may not work in some wireless chargers. Wireless charging
feature charges at a slower rate due to less power being transmitted
to the charging case.
If you do wireless charging, the UVnano LED sterilizes the earbuds for
5 minutes before charging.
LG TONE Free™
Earbuds
UV Charging Case
USB Type C™
Charging Cable
Warranty Card
Extra Ear Gels
(small & large)
Owner’s Manual
1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
OWNER’S MANUAL
Bluetooth®LG Stereo Headset
TONE-FP8
TONE-FP8W
TONE-FP8E Copyright © 2021 LG Electronics Inc. All Rights Reserved
Google Play App Store
www.lg.com
NOTE: For the best performance and
to prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Rev 1.0 IN
[Charging Case]
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to the
ambient sound so that you can recognize the surrounding situation and any
potential risks.
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient sound.
So, you can use the function to listen to the music or watch a video without
interference.
[Earbuds]
*Make sure that the charging terminal is not soiled with foreign substance.
*The appearance and specications of the actual product may differ depending
on the model.
1. Overview
6. Listen to the Ambient Sound (LAS) / Active Noise Cancellation (ANC)
2. How to pair 3. Wearing Earbuds
NOTE: Actual product design may differ from images shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
Make sure authentic LG Electronics components are used. Using a non-
authentic component may damage the product and thus void the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
Charging port
Charging terminals
UVnano LED
Mood light
(When you open the
charging case, the mood
light turns on and off.)
UVnano LED
Battery Status Indicator (up)
UVnano Indicator (down)
Speaker mesh
(Microphone)
Microphone
Microphone
Touchpad
Touchpad
Charging terminals
Charging terminals
Speaker mesh
(Microphone)
-(
-(
#MVFUPPUI 0/
~1m
Turn on the Bluetooth function on the mobile phone or the device to be
connected.
Open the cover of the charging case with the earbuds mounted on the case.
Press and hold the touchpad of the left or right earbud for 3 to 5 seconds
until the battery status indicator blinks in blue.
-(
-(
-(
-(50/&'1
-(
-(50/&'1
#MVFUPPUI
When the Fast Pair connection pop-up appears on the top area of the
mobile phone screen, tap it to connect. (It only supports Android™ 6.0
or higher, and requires conguring Bluetooth and location information
settings of the mobile device.)
If the pop-up does not appear, select [LG-TONE-FP8] from the
Bluetooth menu on the mobile phone and connect it (for users of iOS or
Android 5.0 or lower versions).
!
CAUTION: In the list of Bluetooth connected devices, LG-TONE-FP8_LE
is not the correct model name for connection. Check the model name in
use and connect with the model name without “LE”.
If the earbud model name is abnormally displayed on the Android device,
change the model name in the Bluetooth menu of Connected Device
Settings.
NOTE: To connect with another device, perform the above procedure again.
Automatic Reconnection
The earbuds are connected automatically when you open the cover of the
charging case. If you close the cover of the charging case with both earbuds
mounted in the charging case, the earbuds are disconnected.
Separate the earbuds from the charging case and adjust them so that
they t comfortably in your ears.
NOTE: You can use ear gels that t your ears to improve
Active Noise Canceling (ANC) performance and enjoy
rich music sound.
When you wear the earbuds, you will hear a wearing detection alarm.
4. Playing Music
5. Mobile Calling Functions 7. UVnano 8. Charging 9. Checking the Battery Status
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting
the Volume
: Touch the left(Decrease volume) or
right(Increase volume) earbud twice.
Play Next : Touch the left or right earbud three times.
NOTE: You can change the operation method of the function in the
touchpad settings of the LG TONE Free app.
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired after
mounting them on the charging case
and closing the cover, the UVnano
LED operates for 5 minutes.
*UVnano is a compound word
derived from the words UV and its
unit, nanometer.
NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano charging case eliminates up to 99.9% of harmful
bacteria inside the earbud hole.
In the case of a white product, discolouring may occur in the
contact area of the UVnano LED, but it does not affect the product
function.
!
CAUTION: Be aware that the temperature of the earbuds may rise
while the UVnano LED is on.
[Wired Charging]
When the charging cable is connected, the charging status is displayed in the
charging case.
NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power
to mobile phones, etc.
If earbuds are mounted in the charging case, the earbuds’ battery status is
displayed. Otherwise, the charging case’s battery status is displayed.
If the earbuds are mounted in the charging case while plugged in, the
UVnano process will commence for 5 minutes. Once this process is
complete, the charging case’s battery status will be displayed.
Battery
Status
Indicator
Remaining Battery
(charger not
connected)
Charging State
(charger
connected)
Red 20% or lower Charging
Yellow 20% - 80% -
Green 80% or higher Fully charged
NOTE: When the charging case lid is closed, charging case battery
status is displayed. If the charging case has no remaining charge, there
will be no display and it cannot function. We recommend you keep the
charging case charged at all times as the earbuds are not able to be
turned on and turned off independently.
Touch and hold the left or right earbud to switch between the ANC mode
and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
You can congure the Listen to the Ambient Sound mode and Conversation
mode using the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing
the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music,
or being on the phone.
*ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient
sound become loud suddenly.
When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
Function Status Description
Answering
Calls Ringing Touch the left or right earbud once.
Ending Calls Talking Touch the left or right earbud twice.
Making Calls Idle If you make a call using a mobile phone, the
call is automatically connected to the headset.
Receiving
Calls while on
the Phone
Talking
If you touch the left or right earbud once,
the current call will go on hold, and you will
be able to answer an incoming call.
If the previous call is on hold, you can nish
the current call on the mobile phone.
(It works differently depending on the
mobile phone settings.)
Rejecting
Calls Ringing Touch and hold the left or right earbud.
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
NOTE: The wireless charger is not provided. The wireless charging
function may not work in some wireless chargers. Wireless charging
feature charges at a slower rate due to less power being transmitted
to the charging case.
If you do wireless charging, the UVnano LED sterilizes the earbuds for
5 minutes before charging.
LG TONE Free™
Earbuds
UV Charging Case
USB Type C™
Charging Cable
Warranty Card
Extra Ear Gels
(small & large)
Owner’s Manual
1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
OWNER’S MANUAL
Bluetooth®LG Stereo Headset
TONE-FP8
TONE-FP8W
TONE-FP8E Copyright © 2021 LG Electronics Inc. All Rights Reserved
Google Play App Store
www.lg.com
NOTE: For the best performance and
to prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Rev 1.0 IN
[Charging Case]
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to the
ambient sound so that you can recognize the surrounding situation and any
potential risks.
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient sound.
So, you can use the function to listen to the music or watch a video without
interference.
[Earbuds]
*Make sure that the charging terminal is not soiled with foreign substance.
*The appearance and specications of the actual product may differ depending
on the model.
1. Overview
6. Listen to the Ambient Sound (LAS) / Active Noise Cancellation (ANC)
2. How to pair 3. Wearing Earbuds
NOTE: Actual product design may differ from images shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
Make sure authentic LG Electronics components are used. Using a non-
authentic component may damage the product and thus void the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
Charging port
Charging terminals
UVnano LED
Mood light
(When you open the
charging case, the mood
light turns on and off.)
UVnano LED
Battery Status Indicator (up)
UVnano Indicator (down)
Speaker mesh
(Microphone)
Microphone
Microphone
Touchpad
Touchpad
Charging terminals
Charging terminals
Speaker mesh
(Microphone)
-(
-(
#MVFUPPUI 0/
~1m
Turn on the Bluetooth function on the mobile phone or the device to be
connected.
Open the cover of the charging case with the earbuds mounted on the case.
Press and hold the touchpad of the left or right earbud for 3 to 5 seconds
until the battery status indicator blinks in blue.
-(
-(
-(
-(50/&'1
-(
-(50/&'1
#MVFUPPUI
When the Fast Pair connection pop-up appears on the top area of the
mobile phone screen, tap it to connect. (It only supports Android™ 6.0
or higher, and requires conguring Bluetooth and location information
settings of the mobile device.)
If the pop-up does not appear, select [LG-TONE-FP8] from the
Bluetooth menu on the mobile phone and connect it (for users of iOS or
Android 5.0 or lower versions).
!
CAUTION: In the list of Bluetooth connected devices, LG-TONE-FP8_LE
is not the correct model name for connection. Check the model name in
use and connect with the model name without “LE”.
If the earbud model name is abnormally displayed on the Android device,
change the model name in the Bluetooth menu of Connected Device
Settings.
NOTE: To connect with another device, perform the above procedure again.
Automatic Reconnection
The earbuds are connected automatically when you open the cover of the
charging case. If you close the cover of the charging case with both earbuds
mounted in the charging case, the earbuds are disconnected.
Separate the earbuds from the charging case and adjust them so that
they t comfortably in your ears.
NOTE: You can use ear gels that t your ears to improve
Active Noise Canceling (ANC) performance and enjoy
rich music sound.
When you wear the earbuds, you will hear a wearing detection alarm.
4. Playing Music
5. Mobile Calling Functions 7. UVnano 8. Charging 9. Checking the Battery Status
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting
the Volume
: Touch the left(Decrease volume) or
right(Increase volume) earbud twice.
Play Next : Touch the left or right earbud three times.
NOTE: You can change the operation method of the function in the
touchpad settings of the LG TONE Free app.
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired after
mounting them on the charging case
and closing the cover, the UVnano
LED operates for 5 minutes.
*UVnano is a compound word
derived from the words UV and its
unit, nanometer.
NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano charging case eliminates up to 99.9% of harmful
bacteria inside the earbud hole.
In the case of a white product, discolouring may occur in the
contact area of the UVnano LED, but it does not affect the product
function.
!
CAUTION: Be aware that the temperature of the earbuds may rise
while the UVnano LED is on.
[Wired Charging]
When the charging cable is connected, the charging status is displayed in the
charging case.
NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power
to mobile phones, etc.
If earbuds are mounted in the charging case, the earbuds’ battery status is
displayed. Otherwise, the charging case’s battery status is displayed.
If the earbuds are mounted in the charging case while plugged in, the
UVnano process will commence for 5 minutes. Once this process is
complete, the charging case’s battery status will be displayed.
Battery
Status
Indicator
Remaining Battery
(charger not
connected)
Charging State
(charger
connected)
Red 20% or lower Charging
Yellow 20% - 80% -
Green 80% or higher Fully charged
NOTE: When the charging case lid is closed, charging case battery
status is displayed. If the charging case has no remaining charge, there
will be no display and it cannot function. We recommend you keep the
charging case charged at all times as the earbuds are not able to be
turned on and turned off independently.
Touch and hold the left or right earbud to switch between the ANC mode
and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
You can congure the Listen to the Ambient Sound mode and Conversation
mode using the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing
the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music,
or being on the phone.
*ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient
sound become loud suddenly.
When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
Function Status Description
Answering
Calls Ringing Touch the left or right earbud once.
Ending Calls Talking Touch the left or right earbud twice.
Making Calls Idle If you make a call using a mobile phone, the
call is automatically connected to the headset.
Receiving
Calls while on
the Phone
Talking
If you touch the left or right earbud once,
the current call will go on hold, and you will
be able to answer an incoming call.
If the previous call is on hold, you can nish
the current call on the mobile phone.
(It works differently depending on the
mobile phone settings.)
Rejecting
Calls Ringing Touch and hold the left or right earbud.
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
NOTE: The wireless charger is not provided. The wireless charging
function may not work in some wireless chargers. Wireless charging
feature charges at a slower rate due to less power being transmitted
to the charging case.
If you do wireless charging, the UVnano LED sterilizes the earbuds for
5 minutes before charging.
LG TONE Free™
Earbuds
UV Charging Case
USB Type C™
Charging Cable
Warranty Card
Extra Ear Gels
(small & large)
Owner’s Manual
1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
OWNER’S MANUAL
Bluetooth®LG Stereo Headset
TONE-FP8
TONE-FP8W
TONE-FP8E Copyright © 2021 LG Electronics Inc. All Rights Reserved
Google Play App Store
www.lg.com
NOTE: For the best performance and
to prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Rev 1.0 IN
[Charging Case]
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to the
ambient sound so that you can recognize the surrounding situation and any
potential risks.
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient sound.
So, you can use the function to listen to the music or watch a video without
interference.
[Earbuds]
*Make sure that the charging terminal is not soiled with foreign substance.
*The appearance and specications of the actual product may differ depending
on the model.
1. Overview
6. Listen to the Ambient Sound (LAS) / Active Noise Cancellation (ANC)
2. How to pair 3. Wearing Earbuds
NOTE: Actual product design may differ from images shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
Make sure authentic LG Electronics components are used. Using a non-
authentic component may damage the product and thus void the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
Charging port
Charging terminals
UVnano LED
Mood light
(When you open the
charging case, the mood
light turns on and off.)
UVnano LED
Battery Status Indicator (up)
UVnano Indicator (down)
Speaker mesh
(Microphone)
Microphone
Microphone
Touchpad
Touchpad
Charging terminals
Charging terminals
Speaker mesh
(Microphone)
-(
-(
#MVFUPPUI 0/
~1m
Turn on the Bluetooth function on the mobile phone or the device to be
connected.
Open the cover of the charging case with the earbuds mounted on the case.
Press and hold the touchpad of the left or right earbud for 3 to 5 seconds
until the battery status indicator blinks in blue.
-(
-(
-(
-(50/&'1
-(
-(50/&'1
#MVFUPPUI
When the Fast Pair connection pop-up appears on the top area of the
mobile phone screen, tap it to connect. (It only supports Android™ 6.0
or higher, and requires conguring Bluetooth and location information
settings of the mobile device.)
If the pop-up does not appear, select [LG-TONE-FP8] from the
Bluetooth menu on the mobile phone and connect it (for users of iOS or
Android 5.0 or lower versions).
!
CAUTION: In the list of Bluetooth connected devices, LG-TONE-FP8_LE
is not the correct model name for connection. Check the model name in
use and connect with the model name without “LE”.
If the earbud model name is abnormally displayed on the Android device,
change the model name in the Bluetooth menu of Connected Device
Settings.
NOTE: To connect with another device, perform the above procedure again.
Automatic Reconnection
The earbuds are connected automatically when you open the cover of the
charging case. If you close the cover of the charging case with both earbuds
mounted in the charging case, the earbuds are disconnected.
Separate the earbuds from the charging case and adjust them so that
they t comfortably in your ears.
NOTE: You can use ear gels that t your ears to improve
Active Noise Canceling (ANC) performance and enjoy
rich music sound.
When you wear the earbuds, you will hear a wearing detection alarm.
4. Playing Music
5. Mobile Calling Functions 7. UVnano 8. Charging 9. Checking the Battery Status
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting
the Volume
: Touch the left(Decrease volume) or
right(Increase volume) earbud twice.
Play Next : Touch the left or right earbud three times.
NOTE: You can change the operation method of the function in the
touchpad settings of the LG TONE Free app.
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired after
mounting them on the charging case
and closing the cover, the UVnano
LED operates for 5 minutes.
*UVnano is a compound word
derived from the words UV and its
unit, nanometer.
NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano charging case eliminates up to 99.9% of harmful
bacteria inside the earbud hole.
In the case of a white product, discolouring may occur in the
contact area of the UVnano LED, but it does not affect the product
function.
!
CAUTION: Be aware that the temperature of the earbuds may rise
while the UVnano LED is on.
[Wired Charging]
When the charging cable is connected, the charging status is displayed in the
charging case.
NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power
to mobile phones, etc.
If earbuds are mounted in the charging case, the earbuds’ battery status is
displayed. Otherwise, the charging case’s battery status is displayed.
If the earbuds are mounted in the charging case while plugged in, the
UVnano process will commence for 5 minutes. Once this process is
complete, the charging case’s battery status will be displayed.
Battery
Status
Indicator
Remaining Battery
(charger not
connected)
Charging State
(charger
connected)
Red 20% or lower Charging
Yellow 20% - 80% -
Green 80% or higher Fully charged
NOTE: When the charging case lid is closed, charging case battery
status is displayed. If the charging case has no remaining charge, there
will be no display and it cannot function. We recommend you keep the
charging case charged at all times as the earbuds are not able to be
turned on and turned off independently.
Touch and hold the left or right earbud to switch between the ANC mode
and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
You can congure the Listen to the Ambient Sound mode and Conversation
mode using the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing
the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music,
or being on the phone.
*ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient
sound become loud suddenly.
When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
Function Status Description
Answering
Calls Ringing Touch the left or right earbud once.
Ending Calls Talking Touch the left or right earbud twice.
Making Calls Idle If you make a call using a mobile phone, the
call is automatically connected to the headset.
Receiving
Calls while on
the Phone
Talking
If you touch the left or right earbud once,
the current call will go on hold, and you will
be able to answer an incoming call.
If the previous call is on hold, you can nish
the current call on the mobile phone.
(It works differently depending on the
mobile phone settings.)
Rejecting
Calls Ringing Touch and hold the left or right earbud.
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
NOTE: The wireless charger is not provided. The wireless charging
function may not work in some wireless chargers. Wireless charging
feature charges at a slower rate due to less power being transmitted
to the charging case.
If you do wireless charging, the UVnano LED sterilizes the earbuds for
5 minutes before charging.
LG TONE Free™
Earbuds
UV Charging Case
USB Type C™
Charging Cable
Warranty Card
Extra Ear Gels
(small & large)
Owner’s Manual
1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
OWNER’S MANUAL
Bluetooth®LG Stereo Headset
TONE-FP8
TONE-FP8W
TONE-FP8E Copyright © 2021 LG Electronics Inc. All Rights Reserved
Google Play App Store
www.lg.com
NOTE: For the best performance and
to prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
Rev 1.0 IN
[Charging Case]
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to the
ambient sound so that you can recognize the surrounding situation and any
potential risks.
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient sound.
So, you can use the function to listen to the music or watch a video without
interference.
[Earbuds]
*Make sure that the charging terminal is not soiled with foreign substance.
*The appearance and specications of the actual product may differ depending
on the model.
1. Overview
6. Listen to the Ambient Sound (LAS) / Active Noise Cancellation (ANC)
2. How to pair 3. Wearing Earbuds
NOTE: Actual product design may differ from images shown in manual.
*A mid-sized ear gel is attached to the earbud by default.
Make sure authentic LG Electronics components are used. Using a non-
authentic component may damage the product and thus void the warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
Charging port
Charging terminals
UVnano LED
Mood light
(When you open the
charging case, the mood
light turns on and off.)
UVnano LED
Battery Status Indicator (up)
UVnano Indicator (down)
Speaker mesh
(Microphone)
Microphone
Microphone
Touchpad
Touchpad
Charging terminals
Charging terminals
Speaker mesh
(Microphone)
-(
-(
#MVFUPPUI 0/
~1m
Turn on the Bluetooth function on the mobile phone or the device to be
connected.
Open the cover of the charging case with the earbuds mounted on the case.
Press and hold the touchpad of the left or right earbud for 3 to 5 seconds
until the battery status indicator blinks in blue.
-(
-(
-(
-(50/&'1
-(
-(50/&'1
#MVFUPPUI
When the Fast Pair connection pop-up appears on the top area of the
mobile phone screen, tap it to connect. (It only supports Android™ 6.0
or higher, and requires conguring Bluetooth and location information
settings of the mobile device.)
If the pop-up does not appear, select [LG-TONE-FP8] from the
Bluetooth menu on the mobile phone and connect it (for users of iOS or
Android 5.0 or lower versions).
!
CAUTION: In the list of Bluetooth connected devices, LG-TONE-FP8_LE
is not the correct model name for connection. Check the model name in
use and connect with the model name without “LE”.
If the earbud model name is abnormally displayed on the Android device,
change the model name in the Bluetooth menu of Connected Device
Settings.
NOTE: To connect with another device, perform the above procedure again.
Automatic Reconnection
The earbuds are connected automatically when you open the cover of the
charging case. If you close the cover of the charging case with both earbuds
mounted in the charging case, the earbuds are disconnected.
Separate the earbuds from the charging case and adjust them so that
they t comfortably in your ears.
NOTE: You can use ear gels that t your ears to improve
Active Noise Canceling (ANC) performance and enjoy
rich music sound.
When you wear the earbuds, you will hear a wearing detection alarm.
4. Playing Music
5. Mobile Calling Functions 7. UVnano 8. Charging 9. Checking the Battery Status
-(
Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting
the Volume
: Touch the left(Decrease volume) or
right(Increase volume) earbud twice.
Play Next : Touch the left or right earbud three times.
NOTE: You can change the operation method of the function in the
touchpad settings of the LG TONE Free app.
The charging case has a built-in
UVnano LED, which allows you to
use your earbuds cleanly.
If you charge the earbuds wired after
mounting them on the charging case
and closing the cover, the UVnano
LED operates for 5 minutes.
*UVnano is a compound word
derived from the words UV and its
unit, nanometer.
NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
The UVnano charging case eliminates up to 99.9% of harmful
bacteria inside the earbud hole.
In the case of a white product, discolouring may occur in the
contact area of the UVnano LED, but it does not affect the product
function.
!
CAUTION: Be aware that the temperature of the earbuds may rise
while the UVnano LED is on.
[Wired Charging]
When the charging cable is connected, the charging status is displayed in the
charging case.
NOTE: The earbuds and the charging case are charged at the same time.
The charging port on the charging case cannot be used to supply power
to mobile phones, etc.
If earbuds are mounted in the charging case, the earbuds’ battery status is
displayed. Otherwise, the charging case’s battery status is displayed.
If the earbuds are mounted in the charging case while plugged in, the
UVnano process will commence for 5 minutes. Once this process is
complete, the charging case’s battery status will be displayed.
Battery
Status
Indicator
Remaining Battery
(charger not
connected)
Charging State
(charger
connected)
Red 20% or lower Charging
Yellow 20% - 80% -
Green 80% or higher Fully charged
NOTE: When the charging case lid is closed, charging case battery
status is displayed. If the charging case has no remaining charge, there
will be no display and it cannot function. We recommend you keep the
charging case charged at all times as the earbuds are not able to be
turned on and turned off independently.
Touch and hold the left or right earbud to switch between the ANC mode
and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
You can congure the Listen to the Ambient Sound mode and Conversation
mode using the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing
the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music,
or being on the phone.
*ANC is an acronym for Active Noise Cancellation.
!
CAUTION: When the LAS mode is enabled, you may hear the ambient
sound become loud suddenly.
When using the ANC function outdoors, pay attention to the
surrounding environment for safety.
Function Status Description
Answering
Calls Ringing Touch the left or right earbud once.
Ending Calls Talking Touch the left or right earbud twice.
Making Calls Idle If you make a call using a mobile phone, the
call is automatically connected to the headset.
Receiving
Calls while on
the Phone
Talking
If you touch the left or right earbud once,
the current call will go on hold, and you will
be able to answer an incoming call.
If the previous call is on hold, you can nish
the current call on the mobile phone.
(It works differently depending on the
mobile phone settings.)
Rejecting
Calls Ringing Touch and hold the left or right earbud.
[Wireless Charging]
Align the bottom center of the charging case with the center of the
wireless charger.
NOTE: The wireless charger is not provided. The wireless charging
function may not work in some wireless chargers. Wireless charging
feature charges at a slower rate due to less power being transmitted
to the charging case.
If you do wireless charging, the UVnano LED sterilizes the earbuds for
5 minutes before charging.
LG TONE Free™
Earbuds
UV Charging Case
USB Type C™
Charging Cable
Warranty Card
Extra Ear Gels
(small & large)
Owner’s Manual
16 17 18 19 20 21 22 23
24 25 26 27 28 29 30 31
The LG TONE Free (TONE-FP8) is a lightweight wireless headset that uses
Bluetooth technology.
This product can be used as an audio accessory for devices supporting either
the A2DP or Hands-Free Bluetooth Prole.
Safety Precautions
The following safety precautions are provided to prevent any unexpected
accident or damage. Please familiarise yourself with the safety precautions.
The safety precautions are classied into “WARNING” and “CAUTION”.
!
WARNING: Failing to comply with the instructions may result in
serious injury or death.
!
CAUTION: Failing to comply with the instructions may result in minor
injury or product damage.
!
WARNING
Do not drop the product from a high place.
Make sure there is no water, alcohol, or benzene in contact with the product.
Do not store the product in a wet or dusty place.
Do not place heavy objects on the product.
This product is waterproof to the IPX4 level (daily life waterproof).
(The IPX4 waterproof rating applies to the earbud product only.)
Do not put the product under the water or use it in a humid location
such as a bathroom.
!CAUTION
Do not disassemble, adjust, or repair the product arbitrarily.
Do not place the product near excessive heat or ammable material.
The product may be damaged if an incompatible charger is used.
Make sure that an infant or child does not swallow a magnet or a small
component of the product.
Make sure that foreign objects do not enter the charger’s connectors
(charging port and power plug). Failure to do so may result in re or
electric shock.
If you have a medical device implanted, contact your doctor before
using this device.
This product has a built-in battery, and the battery cannot be removed
or replaced arbitrarily.
For your safety, do not remove the battery incorporated in the product.
If you arbitrarily replace the battery or don’t replace it correctly, it may
explode.
The lithium-ion battery is a hazardous component that can cause injury.
Battery replacement by an unqualied professional can cause damage
to your device.
Do not discard the battery arbitrarily. Follow the local procedure for
discarding batteries.
Risk of re or explosion if the battery is replaced by an incorrect type.
Do not store or transport at pressures lower than 11.6 kPa and at
above 15000 m altitude.
Replacement of a battery with an incorrect type that can defeat a
safeguard (for example, in the case of some lithium battery types).
Disposal of a battery into re or a hot oven, or mechanically crushing or
cutting of a battery, that can result in an explosion.
Leaving a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of ammable
liquid or gas.
A battery subjected to extremely low air pressure that may result in an
explosion or the leakage of ammable liquid or gas.
Do not carelessly throw away old batteries. It can cause an explosion or re.
The disposal method may vary by country and region. Dispose of it in an
appropriate manner.
NOTE
If the product is exposed to excessive sweat, clean the product.
Keep the earbuds clean.
Wearing earbuds for a long time may cause pain, and if humidity inside
ears continues for a long time, it may cause skin trouble.
HD Speaker
If the communication network of the device you are connecting to supports
HD Voice Calling, you can enjoy making voice calls and listening to music in
high denition.
Battery Status Indicator
Status Description
Bluetooth Search Mode The battery status indicator ashes in blue.
Battery below 20% The battery status indicator turns on and
off in red.
Battery 20% - 80% The battery status indicator turns on and
off in yellow.
Battery 80% or more The battery status indicator turns on and
off in green.
When there is a
problem while charging The battery status indicator ashes in red.
Charging
(charger connected) The battery status indicator turns on in red.
Charging complete
(charger connected) The battery status indicator turns on in green.
Out of Range
If the device connected to the product is out of effective communication
range, the communication signal becomes weak and the communication is
lost. The effective communication range may vary depending on surrounding
and other conditions.
If the device comes back within effective communication range, the product
automatically reconnects to the device. If the device is not automatically
reconnected, touch the left or right earbud once to connect them.
LG TONE Free App
If you install the “LG TONE Free” app, you can use Check Earbud Battery,
Voice Alert, Change Equalizer Mode, Check Last Connected Location Information,
and Find My Earbuds functions. Check out the app for more details.
To install the “LG TONE Free” app, search LG TONE Free in the Google Play
Store or App Store or scan the QR code below.
It supports Android 7.0 or higher and iOS 11 or higher.
Google Play App Store
Troubleshooting
If you see any of the following symptoms while using the product, make sure
to recheck it. It may not be a malfunction.
Symptom Cause and Solution
The power does not
turn on Check the battery level and charge it.
If unable to make a
call with earbuds
If the mobile phone does not support headset
and hands-free functions, you cannot use the
calling features.
Check the battery level and charge it.
If unable to register
earbuds to mobile
phone
Check whether earbuds are turned on.
Check if the earbuds have entered the search mode.
- While the earbuds are inserted in the charging
case, press and hold the touch pad on the left
or right earbud for 3 to 5 seconds to switch to
the search mode.
If you replaced the
earbuds or there is
a problem with the
operation
(Factory reset)
While the earbuds are inserted in the charging
case, press and hold the touch pad on the left or
right earbud for 10 seconds or more.
- The battery status indicator of the charging
case ashes red and the initialization to the
factory status is carried out. After initialization
to the factory status, reconnect the earbuds.
Specications and Features
Item Comments
Bluetooth
Specications V 5.2 (Headset/Hands-Free/A2DP/AVRCP)
Battery Earbud : 3.7 V / 68 mAh, Lithium-ion
Charging case : 3.7 V / 390 mAh, Lithium-ion
Music Play Time
Earbuds & With
Charging case
ANC Off : Up to 10 & Up to 24 hours*
ANC On : Up to 6 & Up to 15 hours*
Charging Time
Earbud : within an hour / Charging case : within 2 hours
Fast Charging : 5 min charge for up to 60 min playtime*
※When charging wired at room temperature
Rated Input
Voltage
Earbud : 5 V 0136 mA
Charging case : 5 V 0500 mA
Operating
Temperature 0 °C ~ +40 °C
Operating
Humidity 5 % ~ 60 %
Dimensions
(mm) /
Weight (g)
Earbud : 21.2 mm (W) X 28.3 mm (L) X 23.2 mm (H)
/ 5.2 g (One earbud)
Charging case : 54.5 mm (W) X 54.5 mm (L) X 30 mm (H)
/ 39 g
Frequency range 2402 MHz to 2480 MHz
*Duration of use may vary depending on the connected mobile device,
features being used, settings, signal strength, operating temperature,
frequency band, and other methods of use.
Fast charging feature does not apply when charging case is placed on
wireless charging device such as a pad.
Wireless charging feature charges at a slower rate due to less power
being transmitted to the charging case.
Declaration of Conrmation
FCC NOTICE TO USERS:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Changes or modications not expressly approved by the manufacturer (or
party responsible) for compliance could void the user’s authority to operate
the equipment.
FCC Part 15.105 statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT NOTE:
To comply with the FCC RF exposure compliance requirements, no change
to the antenna or the device is permitted. Any change to the antenna
or the device could result in the device exceeding the RF exposure
requirements and void user’s authority to operate the device.
DECLARATION OF CONFORMITY:
Hereby, LG Electronics declares that the radio equipment type this headset
is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
http://www.lg.com/global/support/cedoc/cedoc#
Bluetooth® is a registered trademark of Bluetooth SIG, Inc. worldwide.
Android, Google Play, the Google Play logo, and other related marks and
logos are trademarks of Google LLC.
FCC ID: ZNFTONEFP8
Additional Information
1. Radio frequency exposure
This Bluetooth LG Stereo Headset is a radio transmitter and receiver. When
in operation, it communicates with a Bluetooth-equipped mobile device
by receiving and transmitting radio frequency (RF) electromagnetic elds
(microwaves) in the frequency range 2402 to 2480 MHz. Your Bluetooth
headset is designed to operate in compliance with the RF exposure
guidelines and limits set by national authorities and international health
agencies when used with any compatible LG Electronics mobile phone.
2.
Bluetooth
connection precautions
The following environments affect the range and reception of Bluetooth signals:
- When walls, metal, human bodies, or other obstacles exist between the
Bluetooth device and the connected device.
- When equipment that uses 2.4 GHz frequency signals (wireless LANs,
wireless phones, microwave ovens, etc.) is placed near the devices being used.
- When using a Bluetooth device (TV, laptop, etc.) other than the mobile
phone, the sound quality may be affected by the specications and
performance of the device.
3. Potentially explosive atmosphere
Turn off your electronic device when in any area with a potentially
explosive atmosphere. Although this is uncommon, your electronic device
could generate sparks. Sparks in such areas could cause an explosion
or re resulting in bodily injury or even death. Areas with a potentially
explosive atmosphere are often but not always clearly marked.
4. Battery information
A rechargeable battery has a long service life if treated properly. A new
battery or one that has not been used for a long period of time could have
reduced capacity the rst few times it is used. Do not expose the battery to
extreme temperatures, never above +50°C or below -10°C. For maximum
battery capacity, use the battery at room temperature. If the battery is
used in low temperatures, the battery capacity will be reduced. The battery
can only be charged in temperatures between 0°C and +45°C.
5. Recycling the battery in your
Bluetooth
Headset
The battery in your Bluetooth Headset must be disposed of properly and
should never be placed in municipal waste.
6. Conditions
- The warranty is valid only if the original receipt issued to the original
purchaser by the dealer, specifying the date of purchase and serial
number, is presented with the product to be repaired or replaced.
LG Electronics reserves the right to refuse warranty service if this
information has been removed or changed after the original purchase of
the product from the dealer.
- If LG Electronics repairs or replaces the product, the repaired or
replaced product shall be warranted for the remaining time of the
original warranty period or for ninety (90) days from the date of
repair, whichever is longer. Repair or replacement may involve the
use of functionally equivalent reconditioned units. Replaced parts or
components will become the property of LG Electronics.
- This Warranty does not cover any failure of the product due to normal
wear and tear, or due to misuse, including but not limited to use in other
than the normal and customary manner, in accordance with instructions
for use and maintenance of the product. Nor does this warranty cover
any failure of the product due to accident, modication or adjustment,
acts of God or damage resulting from liquid.
- This warranty does not cover product failures due to improper repair
installations, modications or service performed by a non-LG Electronics
authorized person. Tampering with any of the seals on the product will
void the warranty.
Limited Warranty
Subject to the conditions of this Limited Warranty, LG Electronics warrants
this product to be free from defects in design, material, and workmanship at
the time of its original purchase by a consumer, and for a subsequent period
of one (1) year. Should your product need warranty service, please return it to
the dealer from whom it was purchased or contact your local LG Electronics
contact center to get further information.
Important Safety Information
Avoiding hearing damage
Permanent hearing loss may occur if you use your headset at a high volume.
Set the volume to a safe level. Over time you can become accustomed to a
higher volume that may sound normal but can be damaging to your hearing.
If you experience ringing in your ears or mufed speech, stop listening and
have your hearing checked. The louder the volume, the less time that is
required before your hearing could be affected.
Hearing experts suggest that to protect your hearing:
• Limit the amount of time you use the headset at a high volume.
• Avoid turning up the volume to block out noisy surroundings.
• Turn the volume down if you can’t hear people speaking
near you.
Using headsets safely
Use of headsets to listen to music while operating a vehicle is not
recommended and is illegal in some areas. Be careful and attentive while
driving. Stop using this device if you nd it disruptive or distracting while
operating any type of vehicle or performing any other activity that requires
your full attention.
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open source
licenses that have the obligations to disclose source code, that is contained
in this product, and to access all referred license terms, copyright notices
and other relevant documents please visithttps://opensource.lge.com.
LG Electronics will also provide open source code to you on CD-ROM for a
charge covering the cost of performing such distribution (such as the cost of
This offer is valid to anyone in receipt of this information for a period of
three yearsafter our last shipment of this produc
t.
RISK GROUP 2
CAUTION : UV EMITTED FROM THIS PRODUCT.
EYE OR SKIN IRRITATION MAY RESULT FROM EXPOSURE.
USE APPROPRIATE SHIELDING.
WARNING : IF YOU DON’T DO CHARGING OR IF
YOU OPEN THE CHARGING CASE, THE UVNANO
FUNCTION IS NOT ACTIVATED.
Customer Information Center
Symbols
~Refers to alternating current (AC).
0Refers to direct current (DC).
Refers to class II equipment.
1Refers to stand-by.
!Refers to “ON” (power).
Refers to dangerous voltage.
The complete manual is available for download from the LG Electronics website.
www.lg.com > support or service > Manuals & Downloads > Manuals
NOTE
16 17 18 19 20 21 22 23
24 25 26 27 28 29 30 31
The LG TONE Free (TONE-FP8) is a lightweight wireless headset that uses
Bluetooth technology.
This product can be used as an audio accessory for devices supporting either
the A2DP or Hands-Free Bluetooth Prole.
Safety Precautions
The following safety precautions are provided to prevent any unexpected
accident or damage. Please familiarise yourself with the safety precautions.
The safety precautions are classied into “WARNING” and “CAUTION”.
!
WARNING: Failing to comply with the instructions may result in
serious injury or death.
!
CAUTION: Failing to comply with the instructions may result in minor
injury or product damage.
!
WARNING
Do not drop the product from a high place.
Make sure there is no water, alcohol, or benzene in contact with the product.
Do not store the product in a wet or dusty place.
Do not place heavy objects on the product.
This product is waterproof to the IPX4 level (daily life waterproof).
(The IPX4 waterproof rating applies to the earbud product only.)
Do not put the product under the water or use it in a humid location
such as a bathroom.
!CAUTION
Do not disassemble, adjust, or repair the product arbitrarily.
Do not place the product near excessive heat or ammable material.
The product may be damaged if an incompatible charger is used.
Make sure that an infant or child does not swallow a magnet or a small
component of the product.
Make sure that foreign objects do not enter the charger’s connectors
(charging port and power plug). Failure to do so may result in re or
electric shock.
If you have a medical device implanted, contact your doctor before
using this device.
This product has a built-in battery, and the battery cannot be removed
or replaced arbitrarily.
For your safety, do not remove the battery incorporated in the product.
If you arbitrarily replace the battery or don’t replace it correctly, it may
explode.
The lithium-ion battery is a hazardous component that can cause injury.
Battery replacement by an unqualied professional can cause damage
to your device.
Do not discard the battery arbitrarily. Follow the local procedure for
discarding batteries.
Risk of re or explosion if the battery is replaced by an incorrect type.
Do not store or transport at pressures lower than 11.6 kPa and at
above 15000 m altitude.
Replacement of a battery with an incorrect type that can defeat a
safeguard (for example, in the case of some lithium battery types).
Disposal of a battery into re or a hot oven, or mechanically crushing or
cutting of a battery, that can result in an explosion.
Leaving a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of ammable
liquid or gas.
A battery subjected to extremely low air pressure that may result in an
explosion or the leakage of ammable liquid or gas.
Do not carelessly throw away old batteries. It can cause an explosion or re.
The disposal method may vary by country and region. Dispose of it in an
appropriate manner.
NOTE
If the product is exposed to excessive sweat, clean the product.
Keep the earbuds clean.
Wearing earbuds for a long time may cause pain, and if humidity inside
ears continues for a long time, it may cause skin trouble.
HD Speaker
If the communication network of the device you are connecting to supports
HD Voice Calling, you can enjoy making voice calls and listening to music in
high denition.
Battery Status Indicator
Status Description
Bluetooth Search Mode The battery status indicator ashes in blue.
Battery below 20% The battery status indicator turns on and
off in red.
Battery 20% - 80% The battery status indicator turns on and
off in yellow.
Battery 80% or more The battery status indicator turns on and
off in green.
When there is a
problem while charging The battery status indicator ashes in red.
Charging
(charger connected) The battery status indicator turns on in red.
Charging complete
(charger connected) The battery status indicator turns on in green.
Out of Range
If the device connected to the product is out of effective communication
range, the communication signal becomes weak and the communication is
lost. The effective communication range may vary depending on surrounding
and other conditions.
If the device comes back within effective communication range, the product
automatically reconnects to the device. If the device is not automatically
reconnected, touch the left or right earbud once to connect them.
LG TONE Free App
If you install the “LG TONE Free” app, you can use Check Earbud Battery,
Voice Alert, Change Equalizer Mode, Check Last Connected Location Information,
and Find My Earbuds functions. Check out the app for more details.
To install the “LG TONE Free” app, search LG TONE Free in the Google Play
Store or App Store or scan the QR code below.
It supports Android 7.0 or higher and iOS 11 or higher.
Google Play App Store
Troubleshooting
If you see any of the following symptoms while using the product, make sure
to recheck it. It may not be a malfunction.
Symptom Cause and Solution
The power does not
turn on Check the battery level and charge it.
If unable to make a
call with earbuds
If the mobile phone does not support headset
and hands-free functions, you cannot use the
calling features.
Check the battery level and charge it.
If unable to register
earbuds to mobile
phone
Check whether earbuds are turned on.
Check if the earbuds have entered the search mode.
- While the earbuds are inserted in the charging
case, press and hold the touch pad on the left
or right earbud for 3 to 5 seconds to switch to
the search mode.
If you replaced the
earbuds or there is
a problem with the
operation
(Factory reset)
While the earbuds are inserted in the charging
case, press and hold the touch pad on the left or
right earbud for 10 seconds or more.
- The battery status indicator of the charging
case ashes red and the initialization to the
factory status is carried out. After initialization
to the factory status, reconnect the earbuds.
Specications and Features
Item Comments
Bluetooth
Specications V 5.2 (Headset/Hands-Free/A2DP/AVRCP)
Battery Earbud : 3.7 V / 68 mAh, Lithium-ion
Charging case : 3.7 V / 390 mAh, Lithium-ion
Music Play Time
Earbuds & With
Charging case
ANC Off : Up to 10 & Up to 24 hours*
ANC On : Up to 6 & Up to 15 hours*
Charging Time
Earbud : within an hour / Charging case : within 2 hours
Fast Charging : 5 min charge for up to 60 min playtime*
※When charging wired at room temperature
Rated Input
Voltage
Earbud : 5 V 0136 mA
Charging case : 5 V 0500 mA
Operating
Temperature 0 °C ~ +40 °C
Operating
Humidity 5 % ~ 60 %
Dimensions
(mm) /
Weight (g)
Earbud : 21.2 mm (W) X 28.3 mm (L) X 23.2 mm (H)
/ 5.2 g (One earbud)
Charging case : 54.5 mm (W) X 54.5 mm (L) X 30 mm (H)
/ 39 g
Frequency range 2402 MHz to 2480 MHz
*Duration of use may vary depending on the connected mobile device,
features being used, settings, signal strength, operating temperature,
frequency band, and other methods of use.
Fast charging feature does not apply when charging case is placed on
wireless charging device such as a pad.
Wireless charging feature charges at a slower rate due to less power
being transmitted to the charging case.
Declaration of Conrmation
FCC NOTICE TO USERS:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Changes or modications not expressly approved by the manufacturer (or
party responsible) for compliance could void the user’s authority to operate
the equipment.
FCC Part 15.105 statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT NOTE:
To comply with the FCC RF exposure compliance requirements, no change
to the antenna or the device is permitted. Any change to the antenna
or the device could result in the device exceeding the RF exposure
requirements and void user’s authority to operate the device.
DECLARATION OF CONFORMITY:
Hereby, LG Electronics declares that the radio equipment type this headset
is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
http://www.lg.com/global/support/cedoc/cedoc#
Bluetooth® is a registered trademark of Bluetooth SIG, Inc. worldwide.
Android, Google Play, the Google Play logo, and other related marks and
logos are trademarks of Google LLC.
FCC ID: ZNFTONEFP8
Additional Information
1. Radio frequency exposure
This Bluetooth LG Stereo Headset is a radio transmitter and receiver. When
in operation, it communicates with a Bluetooth-equipped mobile device
by receiving and transmitting radio frequency (RF) electromagnetic elds
(microwaves) in the frequency range 2402 to 2480 MHz. Your Bluetooth
headset is designed to operate in compliance with the RF exposure
guidelines and limits set by national authorities and international health
agencies when used with any compatible LG Electronics mobile phone.
2.
Bluetooth
connection precautions
The following environments affect the range and reception of Bluetooth signals:
- When walls, metal, human bodies, or other obstacles exist between the
Bluetooth device and the connected device.
- When equipment that uses 2.4 GHz frequency signals (wireless LANs,
wireless phones, microwave ovens, etc.) is placed near the devices being used.
- When using a Bluetooth device (TV, laptop, etc.) other than the mobile
phone, the sound quality may be affected by the specications and
performance of the device.
3. Potentially explosive atmosphere
Turn off your electronic device when in any area with a potentially
explosive atmosphere. Although this is uncommon, your electronic device
could generate sparks. Sparks in such areas could cause an explosion
or re resulting in bodily injury or even death. Areas with a potentially
explosive atmosphere are often but not always clearly marked.
4. Battery information
A rechargeable battery has a long service life if treated properly. A new
battery or one that has not been used for a long period of time could have
reduced capacity the rst few times it is used. Do not expose the battery to
extreme temperatures, never above +50°C or below -10°C. For maximum
battery capacity, use the battery at room temperature. If the battery is
used in low temperatures, the battery capacity will be reduced. The battery
can only be charged in temperatures between 0°C and +45°C.
5. Recycling the battery in your
Bluetooth
Headset
The battery in your Bluetooth Headset must be disposed of properly and
should never be placed in municipal waste.
6. Conditions
- The warranty is valid only if the original receipt issued to the original
purchaser by the dealer, specifying the date of purchase and serial
number, is presented with the product to be repaired or replaced.
LG Electronics reserves the right to refuse warranty service if this
information has been removed or changed after the original purchase of
the product from the dealer.
- If LG Electronics repairs or replaces the product, the repaired or
replaced product shall be warranted for the remaining time of the
original warranty period or for ninety (90) days from the date of
repair, whichever is longer. Repair or replacement may involve the
use of functionally equivalent reconditioned units. Replaced parts or
components will become the property of LG Electronics.
- This Warranty does not cover any failure of the product due to normal
wear and tear, or due to misuse, including but not limited to use in other
than the normal and customary manner, in accordance with instructions
for use and maintenance of the product. Nor does this warranty cover
any failure of the product due to accident, modication or adjustment,
acts of God or damage resulting from liquid.
- This warranty does not cover product failures due to improper repair
installations, modications or service performed by a non-LG Electronics
authorized person. Tampering with any of the seals on the product will
void the warranty.
Limited Warranty
Subject to the conditions of this Limited Warranty, LG Electronics warrants
this product to be free from defects in design, material, and workmanship at
the time of its original purchase by a consumer, and for a subsequent period
of one (1) year. Should your product need warranty service, please return it to
the dealer from whom it was purchased or contact your local LG Electronics
contact center to get further information.
Important Safety Information
Avoiding hearing damage
Permanent hearing loss may occur if you use your headset at a high volume.
Set the volume to a safe level. Over time you can become accustomed to a
higher volume that may sound normal but can be damaging to your hearing.
If you experience ringing in your ears or mufed speech, stop listening and
have your hearing checked. The louder the volume, the less time that is
required before your hearing could be affected.
Hearing experts suggest that to protect your hearing:
• Limit the amount of time you use the headset at a high volume.
• Avoid turning up the volume to block out noisy surroundings.
• Turn the volume down if you can’t hear people speaking
near you.
Using headsets safely
Use of headsets to listen to music while operating a vehicle is not
recommended and is illegal in some areas. Be careful and attentive while
driving. Stop using this device if you nd it disruptive or distracting while
operating any type of vehicle or performing any other activity that requires
your full attention.
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open source
licenses that have the obligations to disclose source code, that is contained
in this product, and to access all referred license terms, copyright notices
and other relevant documents please visithttps://opensource.lge.com.
LG Electronics will also provide open source code to you on CD-ROM for a
charge covering the cost of performing such distribution (such as the cost of
This offer is valid to anyone in receipt of this information for a period of
three yearsafter our last shipment of this produc
t.
RISK GROUP 2
CAUTION : UV EMITTED FROM THIS PRODUCT.
EYE OR SKIN IRRITATION MAY RESULT FROM EXPOSURE.
USE APPROPRIATE SHIELDING.
WARNING : IF YOU DON’T DO CHARGING OR IF
YOU OPEN THE CHARGING CASE, THE UVNANO
FUNCTION IS NOT ACTIVATED.
Customer Information Center
Symbols
~Refers to alternating current (AC).
0Refers to direct current (DC).
Refers to class II equipment.
1Refers to stand-by.
!Refers to “ON” (power).
Refers to dangerous voltage.
The complete manual is available for download from the LG Electronics website.
www.lg.com > support or service > Manuals & Downloads > Manuals
NOTE
16 17 18 19 20 21 22 23
24 25 26 27 28 29 30 31
The LG TONE Free (TONE-FP8) is a lightweight wireless headset that uses
Bluetooth technology.
This product can be used as an audio accessory for devices supporting either
the A2DP or Hands-Free Bluetooth Prole.
Safety Precautions
The following safety precautions are provided to prevent any unexpected
accident or damage. Please familiarise yourself with the safety precautions.
The safety precautions are classied into “WARNING” and “CAUTION”.
!
WARNING: Failing to comply with the instructions may result in
serious injury or death.
!
CAUTION: Failing to comply with the instructions may result in minor
injury or product damage.
!
WARNING
Do not drop the product from a high place.
Make sure there is no water, alcohol, or benzene in contact with the product.
Do not store the product in a wet or dusty place.
Do not place heavy objects on the product.
This product is waterproof to the IPX4 level (daily life waterproof).
(The IPX4 waterproof rating applies to the earbud product only.)
Do not put the product under the water or use it in a humid location
such as a bathroom.
!CAUTION
Do not disassemble, adjust, or repair the product arbitrarily.
Do not place the product near excessive heat or ammable material.
The product may be damaged if an incompatible charger is used.
Make sure that an infant or child does not swallow a magnet or a small
component of the product.
Make sure that foreign objects do not enter the charger’s connectors
(charging port and power plug). Failure to do so may result in re or
electric shock.
If you have a medical device implanted, contact your doctor before
using this device.
This product has a built-in battery, and the battery cannot be removed
or replaced arbitrarily.
For your safety, do not remove the battery incorporated in the product.
If you arbitrarily replace the battery or don’t replace it correctly, it may
explode.
The lithium-ion battery is a hazardous component that can cause injury.
Battery replacement by an unqualied professional can cause damage
to your device.
Do not discard the battery arbitrarily. Follow the local procedure for
discarding batteries.
Risk of re or explosion if the battery is replaced by an incorrect type.
Do not store or transport at pressures lower than 11.6 kPa and at
above 15000 m altitude.
Replacement of a battery with an incorrect type that can defeat a
safeguard (for example, in the case of some lithium battery types).
Disposal of a battery into re or a hot oven, or mechanically crushing or
cutting of a battery, that can result in an explosion.
Leaving a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of ammable
liquid or gas.
A battery subjected to extremely low air pressure that may result in an
explosion or the leakage of ammable liquid or gas.
Do not carelessly throw away old batteries. It can cause an explosion or re.
The disposal method may vary by country and region. Dispose of it in an
appropriate manner.
NOTE
If the product is exposed to excessive sweat, clean the product.
Keep the earbuds clean.
Wearing earbuds for a long time may cause pain, and if humidity inside
ears continues for a long time, it may cause skin trouble.
HD Speaker
If the communication network of the device you are connecting to supports
HD Voice Calling, you can enjoy making voice calls and listening to music in
high denition.
Battery Status Indicator
Status Description
Bluetooth Search Mode The battery status indicator ashes in blue.
Battery below 20% The battery status indicator turns on and
off in red.
Battery 20% - 80% The battery status indicator turns on and
off in yellow.
Battery 80% or more The battery status indicator turns on and
off in green.
When there is a
problem while charging The battery status indicator ashes in red.
Charging
(charger connected) The battery status indicator turns on in red.
Charging complete
(charger connected) The battery status indicator turns on in green.
Out of Range
If the device connected to the product is out of effective communication
range, the communication signal becomes weak and the communication is
lost. The effective communication range may vary depending on surrounding
and other conditions.
If the device comes back within effective communication range, the product
automatically reconnects to the device. If the device is not automatically
reconnected, touch the left or right earbud once to connect them.
LG TONE Free App
If you install the “LG TONE Free” app, you can use Check Earbud Battery,
Voice Alert, Change Equalizer Mode, Check Last Connected Location Information,
and Find My Earbuds functions. Check out the app for more details.
To install the “LG TONE Free” app, search LG TONE Free in the Google Play
Store or App Store or scan the QR code below.
It supports Android 7.0 or higher and iOS 11 or higher.
Google Play App Store
Troubleshooting
If you see any of the following symptoms while using the product, make sure
to recheck it. It may not be a malfunction.
Symptom Cause and Solution
The power does not
turn on Check the battery level and charge it.
If unable to make a
call with earbuds
If the mobile phone does not support headset
and hands-free functions, you cannot use the
calling features.
Check the battery level and charge it.
If unable to register
earbuds to mobile
phone
Check whether earbuds are turned on.
Check if the earbuds have entered the search mode.
- While the earbuds are inserted in the charging
case, press and hold the touch pad on the left
or right earbud for 3 to 5 seconds to switch to
the search mode.
If you replaced the
earbuds or there is
a problem with the
operation
(Factory reset)
While the earbuds are inserted in the charging
case, press and hold the touch pad on the left or
right earbud for 10 seconds or more.
- The battery status indicator of the charging
case ashes red and the initialization to the
factory status is carried out. After initialization
to the factory status, reconnect the earbuds.
Specications and Features
Item Comments
Bluetooth
Specications V 5.2 (Headset/Hands-Free/A2DP/AVRCP)
Battery Earbud : 3.7 V / 68 mAh, Lithium-ion
Charging case : 3.7 V / 390 mAh, Lithium-ion
Music Play Time
Earbuds & With
Charging case
ANC Off : Up to 10 & Up to 24 hours*
ANC On : Up to 6 & Up to 15 hours*
Charging Time
Earbud : within an hour / Charging case : within 2 hours
Fast Charging : 5 min charge for up to 60 min playtime*
※When charging wired at room temperature
Rated Input
Voltage
Earbud : 5 V 0136 mA
Charging case : 5 V 0500 mA
Operating
Temperature 0 °C ~ +40 °C
Operating
Humidity 5 % ~ 60 %
Dimensions
(mm) /
Weight (g)
Earbud : 21.2 mm (W) X 28.3 mm (L) X 23.2 mm (H)
/ 5.2 g (One earbud)
Charging case : 54.5 mm (W) X 54.5 mm (L) X 30 mm (H)
/ 39 g
Frequency range 2402 MHz to 2480 MHz
*Duration of use may vary depending on the connected mobile device,
features being used, settings, signal strength, operating temperature,
frequency band, and other methods of use.
Fast charging feature does not apply when charging case is placed on
wireless charging device such as a pad.
Wireless charging feature charges at a slower rate due to less power
being transmitted to the charging case.
Declaration of Conrmation
FCC NOTICE TO USERS:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Changes or modications not expressly approved by the manufacturer (or
party responsible) for compliance could void the user’s authority to operate
the equipment.
FCC Part 15.105 statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT NOTE:
To comply with the FCC RF exposure compliance requirements, no change
to the antenna or the device is permitted. Any change to the antenna
or the device could result in the device exceeding the RF exposure
requirements and void user’s authority to operate the device.
DECLARATION OF CONFORMITY:
Hereby, LG Electronics declares that the radio equipment type this headset
is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
http://www.lg.com/global/support/cedoc/cedoc#
Bluetooth® is a registered trademark of Bluetooth SIG, Inc. worldwide.
Android, Google Play, the Google Play logo, and other related marks and
logos are trademarks of Google LLC.
FCC ID: ZNFTONEFP8
Additional Information
1. Radio frequency exposure
This Bluetooth LG Stereo Headset is a radio transmitter and receiver. When
in operation, it communicates with a Bluetooth-equipped mobile device
by receiving and transmitting radio frequency (RF) electromagnetic elds
(microwaves) in the frequency range 2402 to 2480 MHz. Your Bluetooth
headset is designed to operate in compliance with the RF exposure
guidelines and limits set by national authorities and international health
agencies when used with any compatible LG Electronics mobile phone.
2.
Bluetooth
connection precautions
The following environments affect the range and reception of Bluetooth signals:
- When walls, metal, human bodies, or other obstacles exist between the
Bluetooth device and the connected device.
- When equipment that uses 2.4 GHz frequency signals (wireless LANs,
wireless phones, microwave ovens, etc.) is placed near the devices being used.
- When using a Bluetooth device (TV, laptop, etc.) other than the mobile
phone, the sound quality may be affected by the specications and
performance of the device.
3. Potentially explosive atmosphere
Turn off your electronic device when in any area with a potentially
explosive atmosphere. Although this is uncommon, your electronic device
could generate sparks. Sparks in such areas could cause an explosion
or re resulting in bodily injury or even death. Areas with a potentially
explosive atmosphere are often but not always clearly marked.
4. Battery information
A rechargeable battery has a long service life if treated properly. A new
battery or one that has not been used for a long period of time could have
reduced capacity the rst few times it is used. Do not expose the battery to
extreme temperatures, never above +50°C or below -10°C. For maximum
battery capacity, use the battery at room temperature. If the battery is
used in low temperatures, the battery capacity will be reduced. The battery
can only be charged in temperatures between 0°C and +45°C.
5. Recycling the battery in your
Bluetooth
Headset
The battery in your Bluetooth Headset must be disposed of properly and
should never be placed in municipal waste.
6. Conditions
- The warranty is valid only if the original receipt issued to the original
purchaser by the dealer, specifying the date of purchase and serial
number, is presented with the product to be repaired or replaced.
LG Electronics reserves the right to refuse warranty service if this
information has been removed or changed after the original purchase of
the product from the dealer.
- If LG Electronics repairs or replaces the product, the repaired or
replaced product shall be warranted for the remaining time of the
original warranty period or for ninety (90) days from the date of
repair, whichever is longer. Repair or replacement may involve the
use of functionally equivalent reconditioned units. Replaced parts or
components will become the property of LG Electronics.
- This Warranty does not cover any failure of the product due to normal
wear and tear, or due to misuse, including but not limited to use in other
than the normal and customary manner, in accordance with instructions
for use and maintenance of the product. Nor does this warranty cover
any failure of the product due to accident, modication or adjustment,
acts of God or damage resulting from liquid.
- This warranty does not cover product failures due to improper repair
installations, modications or service performed by a non-LG Electronics
authorized person. Tampering with any of the seals on the product will
void the warranty.
Limited Warranty
Subject to the conditions of this Limited Warranty, LG Electronics warrants
this product to be free from defects in design, material, and workmanship at
the time of its original purchase by a consumer, and for a subsequent period
of one (1) year. Should your product need warranty service, please return it to
the dealer from whom it was purchased or contact your local LG Electronics
contact center to get further information.
Important Safety Information
Avoiding hearing damage
Permanent hearing loss may occur if you use your headset at a high volume.
Set the volume to a safe level. Over time you can become accustomed to a
higher volume that may sound normal but can be damaging to your hearing.
If you experience ringing in your ears or mufed speech, stop listening and
have your hearing checked. The louder the volume, the less time that is
required before your hearing could be affected.
Hearing experts suggest that to protect your hearing:
• Limit the amount of time you use the headset at a high volume.
• Avoid turning up the volume to block out noisy surroundings.
• Turn the volume down if you can’t hear people speaking
near you.
Using headsets safely
Use of headsets to listen to music while operating a vehicle is not
recommended and is illegal in some areas. Be careful and attentive while
driving. Stop using this device if you nd it disruptive or distracting while
operating any type of vehicle or performing any other activity that requires
your full attention.
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open source
licenses that have the obligations to disclose source code, that is contained
in this product, and to access all referred license terms, copyright notices
and other relevant documents please visithttps://opensource.lge.com.
LG Electronics will also provide open source code to you on CD-ROM for a
charge covering the cost of performing such distribution (such as the cost of
This offer is valid to anyone in receipt of this information for a period of
three yearsafter our last shipment of this produc
t.
RISK GROUP 2
CAUTION : UV EMITTED FROM THIS PRODUCT.
EYE OR SKIN IRRITATION MAY RESULT FROM EXPOSURE.
USE APPROPRIATE SHIELDING.
WARNING : IF YOU DON’T DO CHARGING OR IF
YOU OPEN THE CHARGING CASE, THE UVNANO
FUNCTION IS NOT ACTIVATED.
Customer Information Center
Symbols
~Refers to alternating current (AC).
0Refers to direct current (DC).
Refers to class II equipment.
1Refers to stand-by.
!Refers to “ON” (power).
Refers to dangerous voltage.
The complete manual is available for download from the LG Electronics website.
www.lg.com > support or service > Manuals & Downloads > Manuals
NOTE
16 17 18 19 20 21 22 23
24 25 26 27 28 29 30 31
The LG TONE Free (TONE-FP8) is a lightweight wireless headset that uses
Bluetooth technology.
This product can be used as an audio accessory for devices supporting either
the A2DP or Hands-Free Bluetooth Prole.
Safety Precautions
The following safety precautions are provided to prevent any unexpected
accident or damage. Please familiarise yourself with the safety precautions.
The safety precautions are classied into “WARNING” and “CAUTION”.
!
WARNING: Failing to comply with the instructions may result in
serious injury or death.
!
CAUTION: Failing to comply with the instructions may result in minor
injury or product damage.
!
WARNING
Do not drop the product from a high place.
Make sure there is no water, alcohol, or benzene in contact with the product.
Do not store the product in a wet or dusty place.
Do not place heavy objects on the product.
This product is waterproof to the IPX4 level (daily life waterproof).
(The IPX4 waterproof rating applies to the earbud product only.)
Do not put the product under the water or use it in a humid location
such as a bathroom.
!CAUTION
Do not disassemble, adjust, or repair the product arbitrarily.
Do not place the product near excessive heat or ammable material.
The product may be damaged if an incompatible charger is used.
Make sure that an infant or child does not swallow a magnet or a small
component of the product.
Make sure that foreign objects do not enter the charger’s connectors
(charging port and power plug). Failure to do so may result in re or
electric shock.
If you have a medical device implanted, contact your doctor before
using this device.
This product has a built-in battery, and the battery cannot be removed
or replaced arbitrarily.
For your safety, do not remove the battery incorporated in the product.
If you arbitrarily replace the battery or don’t replace it correctly, it may
explode.
The lithium-ion battery is a hazardous component that can cause injury.
Battery replacement by an unqualied professional can cause damage
to your device.
Do not discard the battery arbitrarily. Follow the local procedure for
discarding batteries.
Risk of re or explosion if the battery is replaced by an incorrect type.
Do not store or transport at pressures lower than 11.6 kPa and at
above 15000 m altitude.
Replacement of a battery with an incorrect type that can defeat a
safeguard (for example, in the case of some lithium battery types).
Disposal of a battery into re or a hot oven, or mechanically crushing or
cutting of a battery, that can result in an explosion.
Leaving a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of ammable
liquid or gas.
A battery subjected to extremely low air pressure that may result in an
explosion or the leakage of ammable liquid or gas.
Do not carelessly throw away old batteries. It can cause an explosion or re.
The disposal method may vary by country and region. Dispose of it in an
appropriate manner.
NOTE
If the product is exposed to excessive sweat, clean the product.
Keep the earbuds clean.
Wearing earbuds for a long time may cause pain, and if humidity inside
ears continues for a long time, it may cause skin trouble.
HD Speaker
If the communication network of the device you are connecting to supports
HD Voice Calling, you can enjoy making voice calls and listening to music in
high denition.
Battery Status Indicator
Status Description
Bluetooth Search Mode The battery status indicator ashes in blue.
Battery below 20% The battery status indicator turns on and
off in red.
Battery 20% - 80% The battery status indicator turns on and
off in yellow.
Battery 80% or more The battery status indicator turns on and
off in green.
When there is a
problem while charging The battery status indicator ashes in red.
Charging
(charger connected) The battery status indicator turns on in red.
Charging complete
(charger connected) The battery status indicator turns on in green.
Out of Range
If the device connected to the product is out of effective communication
range, the communication signal becomes weak and the communication is
lost. The effective communication range may vary depending on surrounding
and other conditions.
If the device comes back within effective communication range, the product
automatically reconnects to the device. If the device is not automatically
reconnected, touch the left or right earbud once to connect them.
LG TONE Free App
If you install the “LG TONE Free” app, you can use Check Earbud Battery,
Voice Alert, Change Equalizer Mode, Check Last Connected Location Information,
and Find My Earbuds functions. Check out the app for more details.
To install the “LG TONE Free” app, search LG TONE Free in the Google Play
Store or App Store or scan the QR code below.
It supports Android 7.0 or higher and iOS 11 or higher.
Google Play App Store
Troubleshooting
If you see any of the following symptoms while using the product, make sure
to recheck it. It may not be a malfunction.
Symptom Cause and Solution
The power does not
turn on Check the battery level and charge it.
If unable to make a
call with earbuds
If the mobile phone does not support headset
and hands-free functions, you cannot use the
calling features.
Check the battery level and charge it.
If unable to register
earbuds to mobile
phone
Check whether earbuds are turned on.
Check if the earbuds have entered the search mode.
- While the earbuds are inserted in the charging
case, press and hold the touch pad on the left
or right earbud for 3 to 5 seconds to switch to
the search mode.
If you replaced the
earbuds or there is
a problem with the
operation
(Factory reset)
While the earbuds are inserted in the charging
case, press and hold the touch pad on the left or
right earbud for 10 seconds or more.
- The battery status indicator of the charging
case ashes red and the initialization to the
factory status is carried out. After initialization
to the factory status, reconnect the earbuds.
Specications and Features
Item Comments
Bluetooth
Specications V 5.2 (Headset/Hands-Free/A2DP/AVRCP)
Battery Earbud : 3.7 V / 68 mAh, Lithium-ion
Charging case : 3.7 V / 390 mAh, Lithium-ion
Music Play Time
Earbuds & With
Charging case
ANC Off : Up to 10 & Up to 24 hours*
ANC On : Up to 6 & Up to 15 hours*
Charging Time
Earbud : within an hour / Charging case : within 2 hours
Fast Charging : 5 min charge for up to 60 min playtime*
※When charging wired at room temperature
Rated Input
Voltage
Earbud : 5 V 0136 mA
Charging case : 5 V 0500 mA
Operating
Temperature 0 °C ~ +40 °C
Operating
Humidity 5 % ~ 60 %
Dimensions
(mm) /
Weight (g)
Earbud : 21.2 mm (W) X 28.3 mm (L) X 23.2 mm (H)
/ 5.2 g (One earbud)
Charging case : 54.5 mm (W) X 54.5 mm (L) X 30 mm (H)
/ 39 g
Frequency range 2402 MHz to 2480 MHz
*Duration of use may vary depending on the connected mobile device,
features being used, settings, signal strength, operating temperature,
frequency band, and other methods of use.
Fast charging feature does not apply when charging case is placed on
wireless charging device such as a pad.
Wireless charging feature charges at a slower rate due to less power
being transmitted to the charging case.
Declaration of Conrmation
FCC NOTICE TO USERS:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Changes or modications not expressly approved by the manufacturer (or
party responsible) for compliance could void the user’s authority to operate
the equipment.
FCC Part 15.105 statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT NOTE:
To comply with the FCC RF exposure compliance requirements, no change
to the antenna or the device is permitted. Any change to the antenna
or the device could result in the device exceeding the RF exposure
requirements and void user’s authority to operate the device.
DECLARATION OF CONFORMITY:
Hereby, LG Electronics declares that the radio equipment type this headset
is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
http://www.lg.com/global/support/cedoc/cedoc#
Bluetooth® is a registered trademark of Bluetooth SIG, Inc. worldwide.
Android, Google Play, the Google Play logo, and other related marks and
logos are trademarks of Google LLC.
FCC ID: ZNFTONEFP8
Additional Information
1. Radio frequency exposure
This Bluetooth LG Stereo Headset is a radio transmitter and receiver. When
in operation, it communicates with a Bluetooth-equipped mobile device
by receiving and transmitting radio frequency (RF) electromagnetic elds
(microwaves) in the frequency range 2402 to 2480 MHz. Your Bluetooth
headset is designed to operate in compliance with the RF exposure
guidelines and limits set by national authorities and international health
agencies when used with any compatible LG Electronics mobile phone.
2.
Bluetooth
connection precautions
The following environments affect the range and reception of Bluetooth signals:
- When walls, metal, human bodies, or other obstacles exist between the
Bluetooth device and the connected device.
- When equipment that uses 2.4 GHz frequency signals (wireless LANs,
wireless phones, microwave ovens, etc.) is placed near the devices being used.
- When using a Bluetooth device (TV, laptop, etc.) other than the mobile
phone, the sound quality may be affected by the specications and
performance of the device.
3. Potentially explosive atmosphere
Turn off your electronic device when in any area with a potentially
explosive atmosphere. Although this is uncommon, your electronic device
could generate sparks. Sparks in such areas could cause an explosion
or re resulting in bodily injury or even death. Areas with a potentially
explosive atmosphere are often but not always clearly marked.
4. Battery information
A rechargeable battery has a long service life if treated properly. A new
battery or one that has not been used for a long period of time could have
reduced capacity the rst few times it is used. Do not expose the battery to
extreme temperatures, never above +50°C or below -10°C. For maximum
battery capacity, use the battery at room temperature. If the battery is
used in low temperatures, the battery capacity will be reduced. The battery
can only be charged in temperatures between 0°C and +45°C.
5. Recycling the battery in your
Bluetooth
Headset
The battery in your Bluetooth Headset must be disposed of properly and
should never be placed in municipal waste.
6. Conditions
- The warranty is valid only if the original receipt issued to the original
purchaser by the dealer, specifying the date of purchase and serial
number, is presented with the product to be repaired or replaced.
LG Electronics reserves the right to refuse warranty service if this
information has been removed or changed after the original purchase of
the product from the dealer.
- If LG Electronics repairs or replaces the product, the repaired or
replaced product shall be warranted for the remaining time of the
original warranty period or for ninety (90) days from the date of
repair, whichever is longer. Repair or replacement may involve the
use of functionally equivalent reconditioned units. Replaced parts or
components will become the property of LG Electronics.
- This Warranty does not cover any failure of the product due to normal
wear and tear, or due to misuse, including but not limited to use in other
than the normal and customary manner, in accordance with instructions
for use and maintenance of the product. Nor does this warranty cover
any failure of the product due to accident, modication or adjustment,
acts of God or damage resulting from liquid.
- This warranty does not cover product failures due to improper repair
installations, modications or service performed by a non-LG Electronics
authorized person. Tampering with any of the seals on the product will
void the warranty.
Limited Warranty
Subject to the conditions of this Limited Warranty, LG Electronics warrants
this product to be free from defects in design, material, and workmanship at
the time of its original purchase by a consumer, and for a subsequent period
of one (1) year. Should your product need warranty service, please return it to
the dealer from whom it was purchased or contact your local LG Electronics
contact center to get further information.
Important Safety Information
Avoiding hearing damage
Permanent hearing loss may occur if you use your headset at a high volume.
Set the volume to a safe level. Over time you can become accustomed to a
higher volume that may sound normal but can be damaging to your hearing.
If you experience ringing in your ears or mufed speech, stop listening and
have your hearing checked. The louder the volume, the less time that is
required before your hearing could be affected.
Hearing experts suggest that to protect your hearing:
• Limit the amount of time you use the headset at a high volume.
• Avoid turning up the volume to block out noisy surroundings.
• Turn the volume down if you can’t hear people speaking
near you.
Using headsets safely
Use of headsets to listen to music while operating a vehicle is not
recommended and is illegal in some areas. Be careful and attentive while
driving. Stop using this device if you nd it disruptive or distracting while
operating any type of vehicle or performing any other activity that requires
your full attention.
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open source
licenses that have the obligations to disclose source code, that is contained
in this product, and to access all referred license terms, copyright notices
and other relevant documents please visithttps://opensource.lge.com.
LG Electronics will also provide open source code to you on CD-ROM for a
charge covering the cost of performing such distribution (such as the cost of
This offer is valid to anyone in receipt of this information for a period of
three yearsafter our last shipment of this produc
t.
RISK GROUP 2
CAUTION : UV EMITTED FROM THIS PRODUCT.
EYE OR SKIN IRRITATION MAY RESULT FROM EXPOSURE.
USE APPROPRIATE SHIELDING.
WARNING : IF YOU DON’T DO CHARGING OR IF
YOU OPEN THE CHARGING CASE, THE UVNANO
FUNCTION IS NOT ACTIVATED.
Customer Information Center
Symbols
~Refers to alternating current (AC).
0Refers to direct current (DC).
Refers to class II equipment.
1Refers to stand-by.
!Refers to “ON” (power).
Refers to dangerous voltage.
The complete manual is available for download from the LG Electronics website.
www.lg.com > support or service > Manuals & Downloads > Manuals
NOTE
Table of contents
Other LG Headset manuals
