LG TONE FREE User manual

OWNER’S MANUAL
For user safety and convenience, please read the user manual before using the
product.
Model
TONE-DT60Q
Bluetooth®LG Stereo Headset
www.lg.com
Copyright © 2022-2023 LG Electronics Inc. All Rights Reserved.

2
Quick Guide
Using Easily in Order
1. Connecting the smartphone to earbuds with Bluetooth ([Please
refer to “Connecting the Smartphone to Earbuds via Bluetooth” on
page 8.)
a Press the settings app [ / ] of the smartphone. Then select Bluetooth and turn on the Bluetooth
function. ( Off > On)
b Open the cover with earbuds attached to the charging case. The blue battery status indicator on the front
blinks. If the blue battery status indicator does not blink, or if you want to connect a device other than the one
already connected, touch and hold the touch pad of the left or right earbud for 3 - 5 seconds.
~1m
c When the Fast Pair connection pop-up appears at the bottom of the smartphone screen, touch the pop-up
to connect.
d If the connection pop-up does not show up, search for [TONE-T60Q] in the Bluetooth® menu of the
smartphone and select it.
• TONE-T60Q_LE is not a valid connection model name in the Bluetooth® connection device list. Check the
model name you are using and connect with the model name that does not contain “LE”.
• Bluetooth name of the product is “TONE-T60Q”.
Quick Guide

3
2. Using earbuds with touch ([Please refer to “Listening to Music”,
“Receiving Phone Call”, and “Listening to Ambient Sound/Active
Noise Cancellation (ANC)” on pages 11, 12, and 13.)
You can touch the earbuds to play or pause music, or receive or reject a phone call. You can change how the
function operates in the touch pad settings of the LG TONE Free app.
Receiving phone call
How to Use Call
Touch once Receiving calls
Touch twice Hanging up calls
Touch and hold Rejecting calls
Listening to music
How to use Play
Touch once Play/Pause
Touch twice Decrease volume (left touch)
Increase volume (right touch)
Touch three times Next song
Listening to ambient sound/Active noise cancellation (ANC)
How to Use Listening to ambient sound/Active noise
cancellation (ANC)
Touch and hold Change function

4
3. Charging ([Please refer to “Charging by Wire”, and “Description
on UVnano” on pages 14, and 15.)
Wired charging
Connect the charging cable to charge the charging case with earbuds. The earbuds and charging case are charged
at the same time.
• If you charge the device with the earbuds attached and the cover closed, the UVnano LED operates for 10
minutes.
>Caution
• Please note that the temperature of the earbuds may become higher while the UVnano LED is operating.
4. Connecting the LG TONE Free app ([Please refer to “Connecting
the LG TONE Free App” on page 17.)
a Search for “LG TONE Free” on Google Play Store or App Store on your smartphone or scan the QR code below
to install the LG TONE Free app.
b Runtheapptousevariousfunctions(checkingtheearbudsbattery,voicenotication,changingtheequalizer
mode, checking the information on the last connected location, searching for my wireless earbuds, etc.) Only
Android 7.0 or iOS 13 or higher is supported.
<Android>
<iOS>

5
Quick Guide
2Using Easily in Order
Exploring the Product
6Charging Case
7Earbuds
Connecting with Bluetooth for
Use
8Connecting the Smartphone to Earbuds via
Bluetooth
9Multiple Connections
9Automatic Reconnection
Listening to Sound with Earbuds
10 Wearing Earbuds
11 Listening to Music
12 Receiving Phone Call
13 Listening to Ambient Sound/Active Noise
Cancellation (ANC)
Charging
14 Charging by Wire
15 Description on UVnano
16 Checking Battery Status
Connecting to the Bluetooth App
17 Connecting the LG TONE Free App
Safety Precautions
18 Safety Notices and Warnings
19 Precautions when Using the Product
Things to Check before Reporting
Malfunction
20 Troubleshooting
Appendix
21 ProductSpecications
Safety Information
22 Prevention of Hearing Loss
22 Additional Information
22 Radiofrequencyexposure
23 Bluetooth connection precautions
23 Battery Information
23 Registered Trademarks and Licenses
24 Open Source Software Notice Information
Cleaning Guide
25 Cleaning Earbud
Contents

6
Exploring the Product
Charging Case
A
B
C
F
C
D
E
A Mood light: When you open the charging case, the mood light turns on and off.
B Case charging port: You can charge a device.
C UVnano LED: If you charge the device with the earbuds attached and the cover closed, the UVnano LED
operates for 10 minutes.
D Battery status indicator (up): You can check the battery status of the earbuds or charging case.
E UVnano indicator (down): The UVnano indicator is blue while the UVnano LED is operating.
F Earbuds charging terminals: You can charge the earbuds by attaching them to the charging case.
Exploring the Product

7
Earbuds
A
A
B
C C
DD
B
A Microphone
B Speaker mesh (microphone)
C Touch pad
D Earbuds charging terminals
Note
• Be careful that foreign substances are not over the Earbuds charging terminals.

8
Connecting with Bluetooth for Use
Connecting the Smartphone to Earbuds via Bluetooth
a Turn on the Bluetooth® function of your smartphone or a device you want to connect.
b Open the cover with earbuds attached to the charging case. The blue battery status indicator on the front
blinks. If the blue battery status indicator does not blink, or if you want to connect a device other than the one
already connected, touch and hold the touch pad of the left or right earbud for 3 - 5 seconds.
~1m
c When the Fast Pair connection pop-up appears at the bottom of the smartphone screen, touch the pop-up
to connect.
• Only Android™ 6.0 or higher is supported, and Bluetooth® and location information settings of the mobile
devicearerequired.
d If the connection pop-up does not show up, select and connect [TONE-T60Q] in the Bluetooth® menu of the
smartphone. (For users of iOS or Android 5.0 or lower)
• TONE-T60Q_LE is not a valid connection model name in the Bluetooth® connection device list. Check the
model name you are using and connect with the model name that does not contain “LE”.
• If the earbuds model name is displayed abnormally on the Android device, please change the model name
in the Bluetooth® menu of the settings of the connected device.
• Bluetooth name of the product is “TONE-T60Q”.
Note
• To connect with another device, perform the above procedures again.
Connecting with Bluetooth for Use

9
Multiple Connections
If you use the LG TONE Free app, you can connect and use two devices, such as a smartphone and a PC at the
same time.
a Please activate Multi-Point & Multi-Pairing on the LG TONE Free app.
b Put the earbuds in the charging case and perform the connecting procedures in the same way.
c The existing connection device becomes the “main connection device” and the newly connected device
becomes the “auxiliary connection device”.
d You can use the multi-connection function more conveniently in the detailed Multi-Point & Multi-Pairing
settings.
Note
• When the two devices are connected at the same time, the main function operates based on the “main
connection device”.
Automatic Reconnection
If you open the charging case of the earbuds, they are automatically connected to the last connected and used
device. (If the device cannot be found, it changes to the connectable mode.)
If automatic reconnection is not done, search for earbuds on the device to be connected and connect them
manually.

10
Listening to Sound with Earbuds
Wearing Earbuds
a Removetheearbudsfromthechargingcaseandwearthemtottightlyintoyourears.
Note
• Ifyouuseaneargelsizedtotyourears,youcanimproveperformanceofactivenoisecancellation(ANC).You
canthenlistentomusicwithrichsoundquality.
b If you wear earbuds properly, you can hear a wear detection sound.
*To replace the ear gel, align the hole shape of the ear gel with the protrusion of the earbuds and fasten it.
Listening to Sound with Earbuds