LG AKB732955 User manual

www.lg.com
OWNER’S MANUAL
MAGIC MOTION REMOTE
Please read this manual carefully before operating your set and retain it
for future reference.
AN-MR200
Remote control (AKB732955)
RF Dongle (EAT614134)

2
ACCESSORIES
0(18
ENTER
VOL CH
MUTE
FREEZE
RATIO
L/RSELECT
ENTER
BACK EXIT
Q.MENU
INFO
MENU
CHVOL
P
A
G
E
FAV
3D
MUTE
1 2 3
4 5 6
7 8
0
9
MARK
LIST
FLASHBK
ENERGY
SAVING
TV
AVMODE INPUT
Magic Motion
Remote Control
and Batteries (AA)
Owner’s manual RF Dongle RF Dongle Cable Strap Velcro
REMOTE DESCRIPTION
CH
MUTE
VOL
ENTER
Home
OK
P
MUTE
Pointer (RF transmitter)
Blinks the light when operating.
POWER
Turns the TV on or off.
ENTER/OK
Selects menus or options and
confirms your input.
Press this button to display the
pointer when it disappears from the
screen.
If you press the navigation button
while moving the pointer on the
screen, the pointer disappears, and
the Magic Motion remote control
works as a regular remote control.
To display the pointer again, shake
the Magic Motion remote control
from side to side within 2 minutes
after it disappeared. (If 2 minutes
have passed, press the Enter button
to display the pointer.)
Navigation (up/down/left/right)
Scrolls through menus or options.
Home
Accesses the Home menu.
Home
OK
P
MUTE
/ VOL(+/-)
Adjusts the volume level.
P / CH(∧/∨)
Scrolls through the saved program or
channels.
MUTE
Mutes all sounds.
ꔛPlease read this manual carefully and use the TV correctly.
ꔛWhen the message “Magic motion remote control battery is low. Change the battery.”
is displayed, replace the battery.
ꔛTo replace batteries, open the battery cover, replace batteries (1.5 V AA) matching
and ends to the label inside the compartment, and close the battery cover. Be sure
to point the remote control at the remote control sensor on the TV.
ꔛTo remove the batteries, perform the installation actions in reverse. Don’t mix old or used batteries
with new ones. Close cover.
Installing Batteries

3
RF SPECIFICATION
The Magic Motion Remote Control
communicates with RF Dongle using a
2.4 GHz bandwidth radio frequency (RF).
ꔛ
Output: 1 dBm or lower
ꔛ
Maximum Communication Distance:
10 m (32.8 ft) in an open space
ꔛ
Bandwidth: 2.4 GHz
(2.4035 GHz - 2.4783 GHz)
ꔛ
Transfer Rate: 250 kbps
RF DONGLE
Use LED LCD TV/LCD TV Only.
PDP Model (50/60PZ95/75/57**) don’t need this
device. PDP TV is built in.
Cable IN
Lamp
*Attach the RF Dongle aligning with the upper left
corner bracket.
2 Connect the RF Dongle Cable plug on the RF
Dongle to a USB1 jack on the TV.
3 Attach the RF Dongle to the velcro as shown
below and then turn on the TV.
*If the RF Dongle for the wireless media box is
attached, attach the RF Dongle for the Magic
Motion remote control on the below right of the
back of the TV.
*To avoid wireless interference, keep the distance
between the RF Dongle and the Wi-Fi dongle at
20 cm.
INSTALLING RF DONGLE
Image shown may differ from your TV.
1 Locate the designated Velcro attachment
location on the TV. Then tear off the
protection paper and attach the Velcro. (The
attachment location is different depending
on the TV model you own)
20cm
86%
or
Velcro

4
PRECAUTIONS TO TAKE
ꔛ
Use the remote control within the
maximum communication distance (10 m,
32.8 ft). Using the remote control beyond
this distance, or with an object
obstructing it, may cause a
communication failure.
ꔛ
A communication failure may occur due to
nearby devices. Electrical devices such as
a microwave oven or wireless LAN
product may cause interference, as this
will use the same bandwidth (2.4 GHz) as
the Magic Motion Remote Control.
ꔛ
The Magic Motion Remote Control may
be damaged or may malfunction if it is
dropped or receives a heavy impact.
ꔛ
When playing a game using the Magic
Motion Remote Control, hold it securely
by wrapping its strap around your wrist
and adjusting the length with the
adjustable ring.
ꔛ
Take care not to bump into nearby
furniture or other people when using the
Magic Motion Remote Control.
ꔛ
It is recommended that your wireless
access point be located more than 1 m
(3.28 ft) away from the TV. If the AP is
installed closer than 1 m, the magic
motion remote control may not perform
as expected due to frequency
interference.
REGISTERING
The Magic Motion Remote Control
operates by pairing with your TV.
How to register the Magic Motion
Remote Control
To register the remote control,
press the ENTER (or OK) button
on the remote control while
aiming it at your TV.
How to Re-register the Magic
Motion Remote Control after
Registration Failure
Reset the remote control by
pressing and holding both the
ENTER (or OK) and MUTE
buttons for 5 seconds. (Once the
reset is complete, the light on
the Pointer blinks.) Then repeat
the above procedure to register
the remote control.
OK
OK
OK
MUTE
ENTER
ENTER
ENTER
You can move the pointer by
aiming the front of the remote
control at your TV then move it
left, right, up or down.
If the pointer does not work
properly after clicking the ENTER
(or OK) button, wait for 10
seconds then use it again.
Press ENTER (or OK) button if
there is no pointer on your TV
screen. The pointer will appear
on the screen.
If the pointer has not been used
for a certain period of time, it will
disappear.
HOW TO USE