LG Magic Remote AN-MR19BA User manual

AN-MR19BA
Please read this manual carefully before using
your remote and retain it for future reference.
Magic Remote
OWNER’S MANUAL
www.lg.com
Copyright © 2019 LG Electronics Inc. All Rights Reserved.

2
ACCESSORIES
The remote control image shown may differ from the actual product.
( Depending on country)
Magic Remote and Alkaline Batteries (AA) Owner’s manual
ꔈContents in this manual may be changed without prior notice due to upgrade of product functions.
BATTERY
1. Installing Batteries
ꔈPlease read this manual carefully.
ꔈPress the top of the battery cover, slide it back, and lift the cover
as shown below.
ꔈTo replace batteries, open the battery cover, replace alkaline
batteries (1.5 V, AA) matching and ends to the label inside
the compartment, and close the battery cover. Be sure to point
the remote control at the remote control sensor on the TV.
ꔈTo remove the batteries, perform the installation actions in
reverse. Don’t mix old or used batteries with new ones. Close the
cover securely.
ꔈOpen the battery cover to find the label.
2. Precautions
ꔈAfter replacement of the batteries, pair the remote control and use it in accordance with user manual.
ꔈIf the unit does not operate after replacement of batteries, reattempt pairing in accordance with the user
manual.
ꔈIf the remote controller is not being used for prolonged period of time, remove the batteries from the unit.
ꔈDo not dismantle or expose the batteries to heat.
ꔈDo not drop or exert extreme impact on the batteries. This may cause the case to be damaged.
ꔈDo not immerse the batteries in water.
ꔈThere is danger of explosion if batteries are inserted incorrectly.
ꔈProperly dispose of used batteries.
ꔈFailure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire,
personal injury, or ambient pollution.

3
REMOTE DESCRIPTION
ꔈThe remote control image shown may differ from the actual product.
ꔈThe order of description may differ from the actual product.
ꔈSome buttons and services may not be provided depending on models or regions.
(POWER)
Turns the TV on or off.
You can turn your set-top box on or off by adding the set-top box to the
universal remote control for your TV.
Number buttons
Enters numbers.
*
Accesses the [QUICK HELP].
(DASH)
Inserts a (DASH) between numbers such as 2-1 and 2-2.
(DASH)*
Enter data broadcast. (Depending on country)
Accesses the saved channels or programmes list.
*
Edits QUICK ACCESS.
(QUICK ACCESS is a feature that allows you to enter a specified app or Live TV
directly by pressing and holding the number buttons.)
(MORE ACTIONS)
Displays more remote control functions.
*
Video/audio descriptions function will be enabled. (Depending on country)
SAP (Secondary Audio Program) feature can also be enabled by pressing the
button. (Depending on country)
(VOL)
Adjusts the volume level.
* To use the button, press and hold for more than 1 second.

4
(Voice recognition)*
Network connection is required to use the voice recognition function.
Once the voice display bar is activated on the TV screen, press and hold the
button and speak your command out loud.
(MUTE)
Mutes all sounds.
(MUTE)*
Accesses the [Accessibility] menu.
(CH/P)
Scrolls through the saved channels or programmes.
(HOME)
Accesses the Home menu.
(HOME)*
Shows the previous history.
(Q. Settings)
Accesses the Quick Settings.
(Q. Settings)*
Displays the [All Settings] menu.
Wheel (OK)
Press the center of the Wheel (OK) button to select a menu.
You can change channels or programmes by using the Wheel (OK)
button.
(up/down/left/right)
Press the up, down, left, or right button to scroll the menu.
If you press buttons while the pointer is in use, the pointer will
disappear from the screen and the Magic Remote will operate like a general
remote control.
To display the pointer on the screen again, shake the Magic Remote to the
left and right.

5
Shows channels or programmes guide.
BACK
Returns to the previous screen.
BACK
*
Clears on-screen displays and returns to last input viewing.
(INPUT)
Changes the input source.
(INPUT)*
Accesses the [HOME DASHBOARD].
Streaming Service buttons
Connects to the Video Streaming Service.
Displays the set-top box Home menu. (When you are not watching via a set-
top box: the display changes to the set-top box screen.)
Shows the previous history. (Depending on country)
These access special functions in some menus.
*: Runs the record function. (Depending on country)
*: Enter Cheering mode. (Depending on country)
(Control buttons)
Controls media contents.

6
USING
1. How to register (pair) or deregister (unpair)
How to register (pair) the Magic Remote
To use the Magic Remote, first pair it with your TV.
1. Put batteries into the Magic Remote and turn the TV on.
2. Point the Magic Remote at your TV and press the Wheel
(OK) on the remote control.
- If the TV fails to register the Magic Remote, try again after
turning the TV off and back on.
How to deregister (unpair) the Magic Remote
Press and hold the (HOME) and
BACK
buttons at the
same time for five seconds, to unpair the Magic Remote with
your TV.
ꔈPressing and holding the button will let you
cancel and re-register Magic Remote at once.
TABLE OF CONTENTS
ACCESSORIES 2
BATTERY 2
1. Installing Batteries 2
2. Precautions 2
REMOTE DESCRIPTION 3
USING 6
1. How to register (pair) or deregister (unpair) 6
2. How to use 7
PRECAUTIONS TO TAKE 7
SPECIFICATIONS 8

7
2. How to use
ꔈShake the Magic Remote slightly to the right and left
or press (HOME), (INPUT), or (Q. Settings)
buttons to make the pointer appear on the screen.
(In some TV models, the pointer will appear when you turn
the Wheel (OK) button.)
ꔈIf the pointer has not been used for a certain period of
time or Magic Remote is placed on a flat surface, then the
pointer will disappear.
ꔈIf the pointer is not responding smoothly, you can reset the
pointer by moving it to the edge of the screen.
ꔈThe Magic Remote depletes batteries faster than a normal
remote due to the additional features.
PRECAUTIONS TO TAKE
ꔈUse the remote control within the specified range (within 10 m).
You may experience communication failures when using the device outside the coverage area or if there
are obstacles within the coverage area.
ꔈYou may experience communication failures depending on the accessories.
Devices such as a microwave oven and wireless LAN operate in the same frequency band (2.4 GHz) as the
Magic Remote. This may cause communication failures.
ꔈThe Magic Remote may not work properly if a wireless router (AP) is within 0.2 m of the TV. Your wireless
router should be more than 0.2 m away from the TV.
ꔈDo not disassemble or heat the batteries.
ꔈDo not drop the battery. Avoid extreme shocks to the battery.
ꔈInserting a battery in the wrong way may result in explosion.

8
SPECIFICATIONS
CATEGORIES DETAILS
Model No. AN-MR19BA
Range of frequency 2.400 GHz to 2.4835 GHz
Output Power (Max.) 4 dBm
Channel 40 channels
Power source AA 1.5 V,
2 alkaline batteries are used
Operational temperature
range 0 °C to 40 °C