When a USB containing MP3 les in several folders is being played,
1. Press [PRESET/FOLDER +/- ] on the remote control repeatedly. Index of the first played file in the folder is displayed.
2. Press
d/M on the unit or remote control to play it. The first file of the folder will play.
Selecting a folder
Auto power down
This unit will turn itself off to save electricity in the case
were the main unit is not connected to an external device
and is not used for 20 minutes.
The unit will also turn itself off after six hours if the Main
unit has been connected to another device using the
analog inputs.
How to disconnect the wireless network
connection or the wireless device.
Turn off the unit.
Product type:
-2.1 speaker system
Power Supply
-Refer to the main label.
Power Consumption
-20 W
Dimensions (W x H x D):
-Satellite: Approx. 110 (W) mm x 201 (H) mm x 115
(D) mm
-Subwoofer: 264 (W) mm x 370 (H) mm x 323 (D)
mm
Net Weight:
-Main Set : Approx. 5.44 kg
Speaker (1EA) : Approx. 0.64 kg
Operating Temperature:
-0 °C to 35 °C
Connectivity:
-3.5mm stereo jack-male input jack
Tuner:
-FM Tuning Range : 87.5 to 108.0 MHz or 87.50 to
108.00 MHz
Impedance:
-Subwoofer: 6 (Ω)
-Satellite: 8 (Ω)
Frequency response
-Subwoofer: 55 Hz~ 104 Hz
-Satellite: 40 Hz ≤20 kHz
Total Max. power
-70 W (THD : 10 %)
Signal to noise ratio
-75 dB
yDesign and specifications are subject to change
without notice.
Specication CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead symbol within
an equilateral triangle is intended to alert the
user to the presence of uninsulated dangerous
voltage within the product’s enclosure that may
be of sufcient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION: The apparatus shall not be exposed to water (dripping or
splashing) and no objects lled with liquids, such as vases, shall be
placed on the apparatus.
WARNING: Do not install this equipment in a conned space such as
a book case or similar unit.
CAUTION: Do not use high voltage products around this product.
(ex. Electrical swatter) This product may malfunction due to electrical
shock.
CAUTION: Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
Slots and openings in the cabinet are provided for ventilation and
to ensure reliable operation of the product and to protect it from
over heating. The openings shall be never be blocked by placing the
product on a bed, sofa, rug or other similar surface. This product shall
not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer’s instruction
has been adhered to.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance and
has no additional outlets or branch circuits. Check the specication
page of this owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or damaged or cracked wire
insulation are dangerous.
Any of these conditions could result in electric shock or re.
Periodically examine the cord of your appliance, and if its appearance
indicates damage or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact replacement part
by an authorized service center. Protect the power cord from physical
or mechanical abuse, such as being twisted, kinked, pinched, closed in
a door, or walked upon. Pay particular attention to plugs, wall outlets,
and the point where the cord exits the appliance.
The Power Plug is the disconnecting device. In case of an emergency,
the Power Plug must remain readily accessible.
NOTICE: For safety marking information including product
identication and supply ratings, please refer to the main label on the
bottom or rear of the apparatus.
This device is equipped with a portable battery or accumulator.
Safety way to remove the battery or the battery from the
equipment: Remove the old battery or battery pack, follow the
steps in reverse order than the assembly. To prevent contamination
of the environment and bring on possible threat to human and
animal health, the old battery or the battery put it in the appropriate
container at designated collection points. Do not dispose of batteries
or battery together with other waste. It is recommended that you use
local, free reimbursement systems batteries and accumulators. The
battery shall not be exposed to excessive heat such as sunshine, re
or the like.
No Power
yThe power cord is not plugged in. Plug in the power
cord.
yCheck whether electricity failed. Check the condition
by operating other electronic devices.
No sound and sound distortion
yThe unit or your external device’s volume is set to
minimum. Check and adjust the volume of the unit.
yWhen you use external device at high volume, the
sound quality may be deteriorated. Lower the volume
of device.
yIf you use the unit for purposes other than listening to
music, the sound quality may be lowered or the unit
may not work properly.
The USB device does not start playback
yAn unplayable USB device is inserted. Check the USB
device.
yCheck whether you selected right function. Pressing
[FUNC.] button and check the selected function.
Radio stations cannot be tuned in properly.
yThe antenna is positioned poorly. Adjust its position.
yThe signal strength of the radio station is too weak.
Tune to the station manually.
yNo stations have been preset or preset stations have
been cleared (when being tuned by scanning preset
channels). Refer to
Presetting Radio Station.
The remote control does not work properly.
yThe remote control is not pointed at the remote
sensor of the unit. Point the remote control at the
remote sensor of the unit.
yThe remote control is too far from the unit. Operate
the remote control within about 23 ft (7 m).
yThere is an obstacle in the path of the remote control
and the unit. Remove the obstacle.
yThe battery in the remote control is exhausted.
Replace the battery with new one.
Bluetooth pairing does not work well.
ySwitch Bluetooth off and on again on your Bluetooth
device, then try pairing again.
yBe sure your Bluetooth device is on.
yRemove the obstacle in the path of the Bluetooth
device and the unit.
yDepending on the type of the Bluetooth device or
surrounding environment, your device may not be
paired with the unit.
yWhen your Bluetooth device have been already
connected with other unit, disconnect the
Bluetooth connection rst.
Cleaning the unit
yTo clean the player, use a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth
lightly moistened with a mild detergent solution.
Do not use strong solvents such as alcohol, benzine,
or thinner, as these might damage the surface of the
unit.
Troubleshooting
Listening to the radio
1. Press [FM/AUTO SCAN] on the remote control or [FUNC.] on the unit until FM appears in the display
window.
The last received station is tuned in.
2. - Auto tuning: Press [TUN.-/+] on the remote control or [TUNING -/+] on the unit for about 1 second
until the frequency indication starts changing, then release. scanning stops when the unit tunes in a
station.
- Manual tuning: Press [TUN.-/+] on the remote control or [TUNING -/+] on the unit repeatedly.
3. Adjust the volume by using [VOL +/-] on the remote control or the unit.
Presetting the Radio Stations
1. Press [FUNC]on the remote control or [FUNC.] on the unit until FM appears in the display window.
2. Select the desired frequency by pressing [TUN.-/+] on the remote control or [TUNING -/+] on the unit.
3. Press [PROGRAM/MEMORY]. A preset number will blink in the display window.
4. Press [PROGRAM/MEMORY]. The station is saved.
5. Repeat steps 2 to 4 to store other stations. You can preset up to 50 stations for FM.
6. To listen a preset station, press [PRESET/FOLDER +/-].
Using AUTO SCAN
1. Press [FM/AUTO SCAN] on the remote control for longer than 2 seconds, all of the FM bands are scanned.
2. Radio frequencies are saved automatically by preset number while FM bands are scanned.
3. To cancel the scanning, press Zor convert to other function. It will be cancelled.
Radio Operation Using BLUETOOTH®
Before you start the pairing procedure, make sure that the Bluetooth
feature is turned on in your Bluetooth device.
1. Press [1POWER] to turn on the unit or remote control.
2. Select the (Bluetooth) function by pressing [FUNC.] on the front of
the unit or button on the remote control.
3. " “ will blink to nd a Bluetooth device on the display window.
