Life Span SP-650 User manual

1
OWNER’SMANUAL
IMPORTANT!
PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE BIKE

Important Safety Information
Please keep this manual in a safe place for easy reference.
1. It is important to read this entire manual before assembling and using the equipment.
Safe and effective use can only be achieved if the equipment is assembled, maintained and
used properly. It is your responsibility to ensure that all users of the equipment are informed
of all warnings and precautions.
2. Before starting any exercise program you should consult your doctor to determine if you
have any medical or physical conditions that could put your health and safety at risk, or
prevent you from using the equipment properly. Your doctor’s advice is essential if you are
taking medication that affects your heart rate, blood pressure or cholesterol level.
3. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health.
Stop exercising if you experience any of the following symptoms: pain, tightness in your
chest, irregular heartbeat, and extreme shortness of breath, lightheadedness, dizziness or
feelings of nausea. If you do experience any of these conditions you should consult your
doctor before continuing with your exercise program.
4. Keep children and pets away from the equipment. The equipment is designed for adult use
only.
5. Use the equipment on a solid, flat level surface with a protective cover for your floor or
carpet. To ensure safety, the equipment should have at least 0.5 meters of free space all
around it.
6. Before using the equipment, check that the nuts and bolts are securely tightened. Always
use the equipment as indicated. If you find any defective components while assembling or
checking the equipment, or if you hear any unusual noises coming from the equipment
during use, stop immediately. Do not use the equipment until the problem has been rectified.
7. Dress up with suitable clothing while using the equipment. Avoid wearing loose clothing that
may get caught in the equipment or that may restrict or prevent movement.
8. The equipment has been tested under class H.C. Braking ability is independent of speed.
9. Care must be taken when lifting or moving the equipment so as not to injure your back.
Always use proper lifting techniques and/or seek assistance if necessary.

EXPLODE-VIEW:
50
1
2
3
4
62
45
46
4
5
5
6
69
7
8
7
8
7
8
8
9
10
31
10
11 11
12
13L
14
15 16
17
17
18
21
22
19 20
19 20
16
23
24
23
24
24 23
24
23
24
23
25
26 14 13R12
27
28 29 30 32
33
34 35
36
37
38 34 39 33
31
30 28
29
27
40
41
42
43
44
47
48
49
49
65
64
52
51
53
54
55
56
57
58
59
42
60
61
67
69 70
71 72
68
66
63

PART LIST：
NO NAME SPECIFICATION QTY
NO
NAME SPECIFICATION QTY
1 MAIN FRAME 1
37
INNER WHEEL COVER 1
2 FRONT BOTTOM TUBE
1
38
FLYWHEEL 1
3 BACK BOTTOM TUBE 1
39
MID AXLE 1
4 END CAP (FRONT) 2
40
BRAKE JOIN 1SET
5 END CAP(BACK) 2
41
FLYWHEEL COVER 1
6 BOLT M8×L90×L40 4
42
BUSHING φ50D 2
7 ARCWASHER φ25×D8×2×R30 4
43
L SHAPE LOCKING
BAR M10 1
8 NUT M8 4
44
WASHER φ40×4×φ10.5
1
9 BOLT M8×40×L12 2
45
HANDLE BAR POST 1
10 WASHER D8×1.5 4
46
HANDLE BAR 1
11 NYLON NUT M8 2
47
BREAK HANDLE BAR 1
12 CRANK BAR COVER 2
48
TENSION KNOB 1
13L/R
L/R PEDAL 各 1
49
KNOB M16 2
14 L/R CRANK 各 1
50
BREAK TENSION WIRE 1
15 AXLETREE COVER 1
51
WASHER d5 2
16 BEARING 6203RS 2
52
BOLT M5×10 2
17 HOOP 2
53
WATER BOTTLE
HOLDER 1
18 INNER CHAIN COVER 1
54
WASHER d4×1 2
19 WASHER D6×1 2
55
BOLT ST4×10 2
20 BOLT ST4.8×12 2
56
WATER BOTTLE 1
21 CHAIN 1
57
BOLT M5 2
22 AXLETREE POST 1
58
WASHER d5 2
23 WASHER D5×1.2 5
59
SADDLE COVER 1
24 BOLT ST4×10 5
60
U SEAT JOIN M10 1
25 OUT CHAIN COVER 1
61
SADDLE 1
26 CRANK COVER 1
62
SADDLE POST 1
27 NUT M12×1 S19 2
63
SADDLE POST JOIN 1
28 NUT M6 2
64
CAP F38 2
29 BOLT 2
65
WASHER d10*Φ20*1.5 1
30 SPACER φ12.5×φ18×6 2 66
NUT M10 1
31 NUT M12×1 H=6 3 67
COMPUTER 1
32 SPACER φ 12.5 × φ 18 ×
14.5 1 68
COMPUTER HOLDER
1
33 SPACER φ12.5×4×φ18 2 69
MAGNET 1
34 BEARING 6001Z 2 70
BOLT ST4*10 2
35 SPACER φ 16 × 69.5 × φ
12.5 1
71
SENSOR 1
36 MAGNETIC WHEEL 1
72
BELT 3*300 2

5
Assembly tool
Please Note: Some of the bolts and washers are already pre-assembled on the spare
parts.

6
STEP1:
Secure the front bottom tube (2) and back bottom tube (3) to the mainframe
(1) with bolt (6), arc washer (7) and nut (8).

7
STEP2:
Secure the pedal (13L/R) to the crank (14).

8
STEP3:
Please Note: ensure that all parts are well fastened to avoid any
injury before use.
Secure the water bottle holder (53) to the mainframe (1) with bolt (55)
and washer (54), and then put the water bottle (56) to the water bottle
holder (53).

9
STEP4:
Secure the saddle (61) to the saddle post (62) with knob (49) and washer
(44).
Assemble the saddle post (62) to the mainframe (1) with knob (49).

10
STEP5:
Assemble the handle bar (46) to the handle bar post (45) with L shape locking bar
(43) and washer (44).
Secure the handle bar (46) to the mainframe (1) with knob (49).
Assemble the display (64) to the display holder (63).