Life Span S1 Sport Series User manual

Indoor Bike
Owner’s Manual
For safe use and product knowledge, please
completely read this Product OWNERS MANUAL.
S1/S2 Sport Series
v. 1.2

ext. 4
S1/S2
Welcome to LifeSpan
3
1/
Web site: www.LifeSpanFitness.com
r

Welcome to Lifespan
Limited Home Use Warranty
Important Safety Precautions
S1 Contents
S1 Assembly Instructions
S1 Assembly Instructions Continued
S2 Contents
S2 Assembly Instructions
S2 Assembly Instructions Continued
S1/S2 Adjustments
S1 Exploded View
S2 Exploded View
Extended Warranty
Serial Number Information
3
5
6
7
8
9
10
11
12
13
14
15
16
19
20
Table of Contents
4

1/
S1
48” Max. Length
47” Max. Height
18”Wide
84 lbs.
31 lbs.
Seat Height
Handlebar Height
Seat Fore/Aft
Alloy with sealed bearings
PVC Dipped
Micro Adjustment knob with felt pad
friction control
Standard Mount Seat
Water Bottle Holder
Front Mounted Transport Wheels
4 Adjustable Foot Pads for Leveling
300 lbs
S2
48” Max. Length
45” Max. Height
21.5”Wide
97 lbs.
40 lbs.
Seat Height
Handlebar Height
Seat Fore/Aft
Alloy with sealed bearings
PVC Dipped
Micro Adjustment knob with felt pad
friction control
Standard Mount Two Tone Bike Seat
Water Bottle Holder
Front Mounted Transport Wheels
4 Adjustable Foot Pads for Leveling
300 lbs.
Max. User Weight:
Specications

6
The LifeSpan Sport S1/S2 Indoor Bike(s) come with the following limited warranty, which applies only to
the use of the Indoor Bike in the home, for residential, non-commercial purposes:
Frame:
Parts:
Labor:
Wear Items:
S1
5 years
90 days
90 days
90 days
S2
5 years
1 year
1 year
90 days (friction pad, seat and pedals)
Labor warranty does not cover replacement of customer assembled parts.
Limited Home Use Warranty
S1/S2
(see details above)
the registration is
bike

7
Important Safety Precautions
1/
Keep children o your indoor bike at all times.
.

Plastic 2
#19
1
3
4
5
7
6
2
8
10
11
12
13
14
14
14
15
18
19
19
18
9
#6
#21
#18 Screw x 4
#9
#8
#20
#2 Seat Bracket
#10
#12
#16
S1 Contents
16
18
19
18
19

19
19
18
18
9
8
19
18 18
10 12
a) Remove plastic block attached to frame for
protection during shipping.
b) Remove bolts (18) and washers (19) from the rear base.
c) Stand the main frame assembly upright with the rear
base (9) positioned underneath the frame.
d) Insert two bolts (18) with washers (19) down through
the holes in the frame and into the rear base.
e) Once both bolts are started, securely tighten rear
base (9) to frame.
a) Remove plastic block attached to frame for protection
during shipping.
b) Remove bolts (18) and washers (19) from the front base.
c) Position the front base underneath the frame.
d) Insert the two bolts (18) with washers (19) down
through the holes in the frame and into the front base (8).
d) Once both bolts are started, securely tighten the front
base (8) to the frame.
12 10
on the bolt of
the
1/
Tighten both pedals with the multifuntion wrench (20).
S1 Assembly Instructions
Front
of Bike

10
6
7
Turn knob clockwise
to tighten
3
4
2a) Loosen the knob (5) on the front of the frame and slide the
seat bracket (2) into the frame. (follow the round adjustment
knob instructions above)
b) Loosen the knob (4) on the botton of the seat bracket (2) and
slide the seat post (3) into the seat bracket. (follow the
round adjustment knob instructions above)
5
Insert handlebar post (6) into the frame, with holes
facing out toward knob. Adjust height and tighten knob (7).
(follow round adjustment knob instructions above)
Round Adjustment Knob Instructions
S1 Assembly Instructions Contiuned
7

S2 Contents
15
15
1/

55
55
56
56
52
57 57
12
Place a washer (55) and cap nut (56) over each bolt
and with the multifunction wrench secure the rear base
in place.
Place a washer (55) and cap nut (56) over each bolt and
with the multifuntion wrench secure the front base
in place.
Tighten both pedals with the multifuntion wrench.
Identify which pedal goes on the right side and which pedal
goes on the left side by locating the “R” on the bolt of the right
pedal (62R) and the “L” on the bolt of the left pedal (62L).
U
S2 Assembly Instructions
Front
of Bike

1/
Turn knob clockwise
to tighten
Insert handlebar post (16) into the frame with holes
facing out toward knob. Adjust height and tighten knob
(15). (follow round adjustment knob instuctions above)
Round Adjustment Knob Instructions
63
a) Loosen the knob (15) on the botton of the seat bracket (17).
(follow round adjustment knob instructions above)
b) Slide seat post (63) into the seat bracket (17) from the front of
the bracket as illustrated. (follow round adjustment knob
instructions above)
S2 Assembly Instructions Contiuned
13

S1/S2 Adjustments
Adjust the foot down until it touches the oor. Repeat if necessary until the
bike is completely stable.
Where to Place your Indoor Bike
Place
The straps should be tight enough to keep the ball of your foot on the pedals throughout the complete
pedal rotation. Before your workout, test each strap and adjust if required. To tighten the strap simply
pull down on the loose end of the strap until the strap is properly tensioned. To loosen the strap, press
down on the top of the clip and pull the strap up.
14

S1 Exploded View
15
06
14
05
03
01
02
12
13
01
05
04
14
06
09
08
11
07
07
10
15
09
01
08
09
01
02
02
03
04
05
07
06 03
04
06
07 05
03
05
06
04
03
01
02
02
04
08
03
02
01
06
02
01
07
02
04
07
07
01
04
06
03
04 05
12
13
01
15
02
04
01
04
02
05
06
03
09
07 08
02
07 06
05
02
04
01
03
05
06
07
11
14
11
15
16
10
13
12
16
14
17 09
08
07
05
04
02
01
03
06
19
18
09

S2 Exploded View
16
32
35
36
34
33
35
36
37
25
29
28
03
30
31
26
27
24
23
50
49
47
62
43
46
48
42
39
40
41
44
39
40
41
54
58
62
58
52
54
57
54
58
53
54
59
60
61
60
31
59
57
31
63
61
60
58
56
55
14
64
65
15
15
56
55
15
19
17
18
63
21
22
16
20
13
05
03
07
04
08
01
02
08
04
07
03
05
06
06
10
11
12
38
09
52
45
69
68
70

1/

MADE IN TAIWAN
TREADMILL MODEL NUMBER
- S1/S2
SERIAL NUMBER :