Life Span Jazz User manual

NOTE: This manual may be subject to updates or changes. Up to date manuals are available through our website at www.lifespanonline.com.au
Product may vary slightly from the item pictured due to model upgrades
Read all instructions carefully before using this product. Retain this owner’s manual for
future reference.
JAZZ OWNER’S MANUAL

2
JAZZ
TABLE OF CONTENTS
1. IMPORTANT SAFETY INSTRUCTIONS 3
2. IMPORTANT ELECTRICAL INFORMATION 4
3. IMPORTANT OPERATING INSTRUCTIONS 5
4. ASSEMBLY INSTRUCTIONS 6
5. FOLDING INSTRUCTIONS 11
6. OPERATION GUIDE WITH PROGRAM CHART 12
7. EXERCISE GUIDE 22
8. MAINTENANCE INSTRUCTIONS 24
9. TROUBLESHOOTING 29
10. EXPLODED DIAGRAM 30
11. PARTS LIST 31
12. WARRANTY 33

3
JAZZ
1. IMPORTANT SAFETY INSTRUCTIONS
WARNING - Read all instructions before using this treadmill.
It is important your treadmill receives regular maintenance to prolong its useful life. Failing to
regularly maintain your treadmill may void your warranty.
Danger – To reduce the risk of electric shock disconnect your treadmill from the electrical outlet prior to
cleaning and/or service work.
DO NOT USE AN EXTENSION CORD: DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY
USING IMPROPER ADAPTERS OR IN ANY WAY MODIFY THE CORD SET.
•Install the treadmill on a flat level surface with access to a 220-240 volt (50/60Hz), grounded outlet.
•Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both carpet and
treadmill may result.
•Do not block the rear of the treadmill. Provide a minimum of 1 metre clearance between the rear of
the treadmill and any fixed object.
•Place your unit on a solid, level surface when in use
•Never allow children on or near the treadmill.
•When running, make sure the plastic clip is fastened on your clothing. It is for your safety, should
you fall or move too far back on the treadmill.
•Keep hands away from all moving parts.
•Never operate the treadmill if it has a damaged cord or plug.
•Keep the cord away from heated surfaces.
•Do not operate where aerosol spray products are being used or where oxygen is being administered.
Sparks from the motor may ignite a highly gaseous environment.
•Never drop or insert any object into any openings.
•The treadmill is intended for in-home use only and not suitable for long time running.

4
JAZZ
•To disconnect, turn all controls to the off position, remove the safety key, and then remove the plug
from the outlet.
•The pulse sensors are not medical devices. Various factors, including the user’s movement, may
affect the accuracy of heart rate readings. The pulse sensors are intended only as exercise aids in
determining heart rate trends in general.
•Use the handrails provided; they are for your safety.
•Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on your
treadmill. Quality athletic shoes are recommended to avoid leg fatigue.
•Allowed temperature: 5 to 40 degrees.
Remove the safety key after use to prevent unauthorized treadmill operation.
2. IMPORTANT ELECTRICAL INFORMATION
WARNING!
•NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Route the power
cord away from any moving part of the treadmill including the elevation mechanism and transport
wheels.
•NEVER remove any cover without first disconnecting AC power.
•NEVER expose this treadmill to rain or moisture. This treadmill is not designed for use outdoors,
near a pool, or in any other high humidity environment.
•This is high-power item; please do not share the same outlet with other high power machines such
as, fridges, air conditioning etc. Please choose an outlet exclusively for the machine and make sure
the fuse is 10A.

5
JAZZ
3. IMPORTANT OPERATING INSTRUCTIONS
•Be sure to read the entire manual before operating your machine.
•Understand that changes in speed and incline do not occur immediately. Set your desired speed on
the computer console and release the adjustment key. The computer will obey the command
gradually.
•Use caution while participating in other activities while walking on your treadmill, such as watching
television, reading, etc. These distractions may cause you to lose balance or stray from walking in
the centre of the belt; which may result in serious injury.
•In order to prevent losing balance and suffering unexpected injury, NEVER mount or dismount the
treadmill while the belt is moving. This unit starts with at a very low speed. Simply standing on the
belt during slow acceleration is proper after you have learned to operate this machine.
•Always hold on to handrail while making control changes.
•A safety key is provided with this machine. Remove the safety key will stop the walking belt
immediately; the treadmill will shut off automatically. Inserting the safety key will reset the display.
•Do not use excessive pressure on console control keys. They are precision set to function properly
with little finger pressure.

6
JAZZ
4. ASSEMBLY INSTRUCTIONS
PARTIAL PART LIST
No
DES.
Specification
Qty No
DES.
Specification
Qty
1 Main frame 1 71 Safety key 1
12 #5 Allen wrench 5mm 1 61 wrench w/screw driver S=13、14、15
70 Bolt M8*45 2 64 Lock washer 8 5
83 Left back cover 1 60 Bolt ST4.2*19 4
84
Right back cover
1 51
Bolt
M8*16 3
89 Spring 2 43 Rubber Pads 2
ASSEMBLY TOOLS:
5# Allen Wrench 5mm 1pc
#6 Allen Wrench 6mm 1pc
Wrench s/screw Driver S=13, 14, 15 - 1pc
Note: Do not plug in power until machine is completely assembled

7
JAZZ
STEP 1:
STEP 2:
1. Open the carton
2. Extract the parts listed above
3. Place the Main Frame onto level
ground
Do not damage the computer wire when
folding the computer.
1. Move the computer according to the
diagram.
2. Screw in Bolt M8*16(51) and the Lock
washer (64) of Left Upright and Right
Upright.
3. Secure the Computer frame to the Left
Upright and Right Upright tightly with
Bolt M8*16(51) and Lock washer (64)
Note: Support the upright with your hand to
avoid it falling down and causing injury.

8
JAZZ
STEP 3:
1. Do not severe the computer wire when
folding the computer to on top of the
Left Upright and Right Upright.
2. Note: hold the Left Upright and
Right Upright, to prevent them from
falling down

9
JAZZ
STEP 4:
STEP 5:
1. Using the 5# Allen wrench (12),
screw in the Bolt M8*45 (70) and
Lock washer (64)
2. Then attach the Right Upright Tube
(3) to the Main Frame (1) using the
Bolt M8*16(51) and Lock washer
(64).
3. Repeat these steps for the Left
Upright Tube
Note: Support the upright with your hand
to avoid it falling down and causing injury.
1. Use the wrench w/screw driver (61) to
attach the Left back cover (83) onto the
base frame with ST4.2*19(60).
2. Use the wrench w/screw driver (61) to
attached the Right back cover (84) onto
the base frame with ST4.2*19(60).

10
JAZZ
STEP 6:
STEP 7:
1. Place the safety key (71) on the
computer and start your workout.
1. Attach the spring (89) to the rubber
pads(43)
2. Erect the frame and screw the entire
assembly onto the frame