Life Span TR6000i User manual

FITNESS
QUICK START
TR6000iTREADMILL
lifespanfitness.com
1. Attach Power Cord to
treadmill base, then plug
into outlet and turn on
the Power Switch
2. Conrm that the Safety Key is securely in place
3. Press the Power button
Stand on the siderails of treadmill.
4. Press Start
5. Adjust speed and incline with the up and down arrow keys
The treadmill belt will start to move. You can begin your workout.
6. Press Stop when you are nished
Begin Here
1

FITNESS
PROBLEM:
The console does not turn on or
function correctly.
PROBLEM:
The Power Button on the console
does not turn the console on.
PROBLEM:
Heart rate is erratic or not reading.
SOLUTION:
Check to make sure the treadmill
is properly plugged in, turn the
power switch down by the power
cord o and back on again and
make sure the safety key is in
place. Check all wire harness
connections made during
assembly to be sure they are
all properly connected. If the
problem persists contact LifeSpan
Customer Service.
Customer Service: 877.654.3837 x 4
SOLUTION:
Check the main power switch
and power cord located at the
front of the treadmill on the right
side. Make sure the power cord is
plugged in and the power switch
is turned on.
SOLUTION:
Make sure your hands are clean
and moist (Tap water, sweat
or Aloe Vera helps). Make sure
all connectors made during
assembly, at the back of the
console, are properly connected
and no wires are damaged. Hold
the grips lightly for 30 seconds to
stabilize. If wearing a chest strap,
be sure the batteries are good and
that the electrodes are moist and
positioned properly on your chest.
TROUBLESHOOTING
lifespanfitness.com
TR6000iTREADMILL
Please see Owner’s Manual section Maintenance and Tips for more information.
BLANK
SCREEN
E1
PROBLEM:
E1 Error Code after several
minutes of use.
SOLUTION:
This problem usually occurs when
there is too much friction building
between the treadmill belt and
deck. The best thing to do is turn
the treadmill o, lubricate the
running belt with 100% silicone
(non-aerosol), and turn the
treadmill back on. Test the unit.
If E1 still comes up after testing,
contact LifeSpan Customer Service.